Thermal Conductivity of Unidirectional Reinforced Composite Materials—Experimental Measurement as a Function of State of Cure

Abstract

The thermal conductivity of a thermosetting polymeric matrix-based composite material is a thermophysical parameter, which varies significantly during the transformation of the matrix. These variations have a considerable effect on heat transfers within a thick piece in the process and therefore on transformation kinetics of the polymer. In order to address the analysis method used to determine the parameter variations according to both temperature and state of cure of the transformation, the experimental device developed by the authors is first described. Then, the results, experimentally obtained by inverse heat conduction with a composite of Fiberglas^® and epoxy resin, are compared with those given by an effective thermal conductivity model.

References

1. J-L. Bailleul, 1997. “Optimisation du cycle de cuisson de pièces épaisses en matériau composite. Application à un préimprégné resine époxyde/fibres de verre,” Ph.D. dissertation, Université de Nantes ISITEM.

2. A. Sommier and B. Gamier, “Nouvelle méthode pour la mesure de diffusivité thermique des résines thermodurcissables au cours de leur polymréisation,” SFT 99, May 17–19, Arcachon, pp. 333–338.

3. S. Sourour and M. R. Kamal , Polymer Engineering and Science, 16 (1976), pp. 480–488.

4. J-L. Bailleul , D. Delaunay , Y. Jarny , “Optimal Thermal Processing of Composite Materials: An Inverse Algorithm and Its Experimental Validation,” Heat Transfer 1998. Proceedings of 11th Int. Heat and Temperature Conf., Vol. 5, pp. 87–92, August 23–28, 1998, Kyongju, Korea.

5. T. Jurkowski, 1993. “Mise en oeuvre d’une méthode et réalisation d’un appareillage de mesure de la conductivité thermique,” Ph.D. dissertation, Laboratoire de Thermocinétique ISITEM, Nantes, 1993.

6. D. P. H. Hasselman , K. Y. Donaldson and J. R. Thomas , 1993. “Effective Thermal Conductivity of Uniaxial Composite with Cylindrically Orthotropic Carbon Fibers and Interfacial Thermal Barrier,” J. Comp. Mat, vol. 27, no. 6, pp. 637–644.

7. Y. Benveniste , T. Chen and G. L. Dvorak , 1990. “The Effective Conductivity of Composites Reinforced by Coated Cylindrically Orthotropic Fibbers,” J. Appl. Phys. 67:2878–2884.

8. J-L. Bailleul , D. Delaunay and Y. Jarny , 1996. “Determination of Temperature Variable Properties of Composite Materials: Methodology and Experimental Results,” Journal of Reinforced Plastics and Composites, Vol 15, pp. 479–496.

9. H. S. Carslaw and J. C. Jaeger , 1959. Conduction of Heat in Solids, 2nd Edition, Oxford at the Clarendon Press.

10.

10. P. Bardonnet, “Rélines époxydes: composants et propriétés,”Les Techniques de l’Ingénieur, A3466.

11.

11. D. Lecointe “Caractérisation et simulation des processus de transferts lors d’injection de résine pour le procédé R.T.M.,” Ph.D. dissertation, Laboratoire de Thermocinétique ISITEM, Nantes, 1999.