The impact of fiber-matrix adhesion on the transverse microcracking of fiber reinforced polymeric materials thermally cycled at cryogenic temperatures was investigated using symmetric cross-ply carbon fiber/epoxy laminates containing fibers with different surface treatments. Past research explored the role of fiber-matrix adhesion in determining the room temperature properties of composite materials, but this work is original in that it examined how fiber-matrix adhesion affected the behavior of composite materials at cryogenic temperatures. Three fiber surfaces were used: Unsized but exposed to an oxidative surface treatment, epoxy sized, and surfactant sized. Modifications of the fiber surfaces changed the adhesion of the matrix to the fibers as determined by interlaminar shear strength and dynamic mechanical analysis. The extent of microcracking in the laminates exhibited a dependence on fiber-matrix adhesion, with high levels of adhesion corresponding to decreased microcracking.
References
1.
1. Mallick, P.K. (1993). Fiber-Reinforced Composites: Materials, Manufacturing, and Design, 2nd edn, Marcel Dekker Inc., New York .
2.
2. Madhukar, M.S. and Drzal, L.T. (1991). Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: I. Inplane and Interlaminar Shear Behavior of Graphite/Epoxy Composites , Journal of Composite Materials, 25: 932 .
3.
3. Madhukar, M.M. and Drzal, L.T. (1991). Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: II. Longitudinal (0) and Transverse (90) Tensile and Flexure Behavior of Graphite/Epoxy Composites , Journal of Composite Materials, 25: 958 .
4.
4. Madhukar, M.M. and Drzal, L.T. (1992). Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: IV. Mode I and Mode II Fracture Toughness of Graphite/Epoxy Composites , Journal of Composite Materials, 26(7): 936 .
5.
5. Tandon, G.P. and Kim, R.Y. (1997). Test Methods for Estimation of Interfacial Normal Strength in Unidirectional Fiber Reinforced Composites , Journal of Reinforced Plastics and Composites, 16(17): 1550 .
6.
6. Herrera-Franco, P.J. and Drzal, L.T. (1991). Comparison of Methods for the Measurement of Fiber/Matrix Adhesion in Composites , Composites, 23(1): 2 .
7.
7. Nguyen, B. (1999). Cryotank Skin/Stringer Bondline Analysis , 44th International SAMPE Conference, 44: 856 .
8.
8. Loken, H.Y.et al. (1988). Water Ingression Resistant Thin Faced Honeycomb Cored Composite Systems with Facesheets Reinforced with KEVLAR Aramid Fibers and KEVLAR with Carbon Fibers, DuPont Corporation, Wilmington .
9.
9. Salin, I. and Seferis, J.C. (1996). Anisotropic Degradation of Polymeric Composites: From Neat Resin to Composite , Polymer Composites, 13(3): 430 .
10.
10. Crasto, A.S. and Kim, R.Y. (1993). On the Determination of Residual Stresses in Fiber-Reinforced Thermoset Composites , Journal of Reinforced Plastics and Composites, 12: 545 .
11.
11. Bobrov, E.S., Williams, J.E.C. and Iwasa, W. (1985). Experimental and Theoretical Investigation of Mechanical Disturbances in Epoxy-Impregnated Superconducting Coils. Part 2. Shear-Stress-Induced Epoxy Fracture as the Principle Source of Premature Quenches and Training - Theoretical Analysis , Cryogenics, 25(6): 307 .
12.
12. Jang, B.Z., Lieu, Y.K., Chang, S. and Hwang, L.R. (1987). Cryogenic Failure Mechanisms of Fiber-Epoxy Composites for Energy Applications , Polymer Composites, 8(3): 188 .
13.
13. Toth, J.M., Bailey, W.J. and Boyce, D.A. (1985). Fatigue at Low Temperatures, In: Stephens, R.I. (ed.), ASTM STP 857, p. 163, American Society for Testing and Materials, Philadelphia .
14.
14. Ambur, D.R., Sikora, J., Maguire, J.F. and Winn, P.M. (1996). Development of a Pressure Box to Evaluate Reusable-Launch-Vehicle Cryogenic-Tank Panels, NASA-TM-11406, Paper 96-1640, NASA .
16. Adams, D.S., Bowles, D.E. and Herakovich, C.T. (1986). Thermally Induced Transverse Cracking in Graphite-Epoxy Cross-Ply Laminates , Journal of Reinforced Plastics and Composites, 5: 152 .
17.
17. Wood, C. and Bradley, W. (1996). A New Technique to Study the Interfacial Strength and Transverse Cracking Scenario in Composite Materials, In: Spragg, C.J. and Drzal, L.T. (eds), Fiber Matrix and Interface Properties, ASTM STP 1290, p. 132, ASTM, Philadelphia .
18.
18. Pithkethly, M.J. (1996). The Use of Interfacial Test Methods in Composite Materials Development, In: Spragg, C.J. and Drzal, L.T. (eds.), Fiber Matrix and Interface Properties, ASTM STP 1290, p. 34, ASTM, Philadelphia .
19.
19. (2000). AS4C Carbon Fiber Product Data, HCF-610-001, Hexcel Carbon Fibers, Salt Lake City .
20.
20. Putnam, J.W., Hayes, B.S. and Seferis, J.C. (1996). Prepreg Process-Structure-Property Analysis and Scale-Up for Manufacturing and Performance , Journal of Advanced Materials, 27(4): 47 .
21.
21. (1996). Resin Content and Fiber Areal Weight of Prepreg Fabric and Tape, Test Method For, BSS 7336, Boeing Materials Technology, Boeing Commercial Aircraft Group, Renton, WA .
22.
22. (1999). Standard Test Methods for Constituent Content of Composite Materials, ASTM D 3171-99, ASTM, West Conshohocken, PA .
23.
23. (1995). Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method, ASTM D 2344-84, ASTM, West Conshohocken, PA .
24.
24. Skoog, D.A. and Leary, J.L. (1992). Principles of Instrumental Analysis, 4th edn, Harcourt Brace College Publishers, San Diego .
25.
25. Schultz, J., Lavielle, L. and Martin, C. (1987). The Role of the Interface in Carbon Fiber-Epoxy Composites , Journal of Adhesion, 23: 45 .
26.
26. Palmese, G.R. (May 17th, 2002). Personal Communication.
27.
27. Drzal, L.T., Rich, M. J. and Lloyd, P.F. (1982). Adhesion of Graphite Fibers to Epoxy Matrices: 1. The Role of Fiber Surface Treatment , Journal of Adhesion, 16: 1 .
28.
28. Kennedy, J.M., Edie, D.D., Banerjee, A. and Cano, R.J. (1992). Characterization of Interfacial Bond Strength by Dynamic Analysis , Journal of Composite Materials, 26(6): 869 .
29.
29. Wu, H.F., Gu, W., Lu, G.-Q. and Kampe, S.L. (1997). Non-destructive Characterization of Fibre-Matrix Adhesion in Composites by Vibration Damping , Journal of Materials Science, 32: 1795 .
30.
30. Perret, P., Gerard, J.F. and Chabert, B. (1987). A New Method to Study the Fiber-Matrix Interface in Unidirectional Composite Materials: Application for Carbon Fiber-Epoxy Composites , Polymer Testing, 7: 405 .
