Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional Composite

Abstract

A three-dimensional finite element analysis is performed to investigate the effects of fiber arrangements on the residual thermal stresses in unidirectional composites of various fiber volume fractions (FVFs). The fiber arrangements include the regular fiber arrays (square and hexagonal arrays) and a random fiber array. Normal, tangential, and shear stresses at the fiber–matrix interface are first obtained using unit cells of the regular square and hexagonal fiber arrays. To simulate better real fiber arrangements, random fiber distribution is modeled and analyzed using a finite element analysis. Statistical distributions of residual thermal stresses are obtained for various FVFs and compared with the results from regular fiber arrays. The effects of constituent material properties of composites on thermal stresses are also taken into consideration. The results indicate that the random arrangement of fibers has a significant influence on residual thermal stresses especially at high FVFs. The mode stresses of the random fibers are well estimated using the square array whereas the mean stresses are better predicted from the hexagonal array. It is shown that predicted coefficients of thermal expansion are not influenced by the microstructure of composites.

Keywords

residual thermal stress micromechanics representative volume element (RVE)random fiber array statistical approach

References

Hull, D. and Clyne, T.W. (1996). An Introduction to Composite Materials, 2nd edn, Cambridge University Press, Cambridge.

Nairn, J.A. (1985). Thermoelastic Analysis of Residual Stresses in Unidirectional, High Performance Composites, Polymer Composites, 6(2): 123–130.

Avery, W.B. and Herakovich, C.T. (1986). Effect of Fiber Anisotropy on Thermal Stresses in Fibrous Composites, Journal of Applied Mechanics, Transactions of the ASME, 53(4): 751–756.

You, L.H. (2004). An Efficient Method for Thermal Analysis of Composite Containing Anisotropic Continuous Fibers and an Arbitrary Number of Interfacial Layers, Computational Materials Science, 29(1): 49–66.

Fiedler, B. , Hoju, M. , Ochiai, S. , Schulte, K. and Ochi, M. (2001). Finite-element Modeling of Initial Matrix Failure in CFRP under Static Transverse Tensile Load, Composites Science and Technology, 61(1): 95–105.

Fiedler, B. , Hoju, M. and Ochiai, S. (2002). The Influence of Thermal Residual Stresses on the Transverse Strength of CFRP using FEM, Composites: Part A, 33(10): 1323–1326.

Asp, L.E. , Berglund, L.A. and Talreja, R. (1996). Prediction of Matrix-initiated Transverse Failure in Polymer Composites, Composites Science and Technology, 56(9): 1089–1097.

Fletcher, A.J. and Oakeshott, J.L. (1994). Thermal Residual Microstress Generation during the Processing of Unidirectional Carbon Fibre/Epoxy Resin Composites: Regular Fibre Arrays, Composites, 25(8): 797–805.

Nakamura, T. and Suresh, S. (1993). Effects of Thermal Residual Stresses and Fiber Packing on Deformation of Metal-Matrix Composites, Acta Metall. Mater., 41(6): 1665–1681.

10.

Fletcher, A.J. and Oakeshott, J.L. (1994). Thermal Residual Microstress Generation during the Processing of Unidirectional Carbon Fibre/Epoxy Resin Composites: Random Fibre Arrays, Composites, 25(8): 806–813.

11.

Bulsara, V.N. , Talreja, R. and Qu, J. (1999). Damage Initiation under Transverse Loading of Unidirectional Composites with Arbitrary Distributed Fibers, Composites Science and Technology, 59(5): 673–682.

12.

Oh, J.H. , Jin, K.K. and Ha, S.K. (2005). Interfacial Strain Distribution of a Unidirectional Composite with Randomly Distributed Fibers under Transverse Loading, Journal of Composite Materials, 40(9): 759–778.

13.

Yang, S. , Tewari, A. and Gokhale, M.A. (1997). Modeling of Non-uniform Spatial Arrangement of Fibers in a Ceramic Matrix Composite, Acta Materialia, 45(7): 3059–3069.

14.

Louis, P. and Gokhale, A.M. (1996). Computer Simulation of Spatial Arrangement and Connectivity of Particles in Three-dimensional Microstructure: Application to Model Electrical Conductivity of Polymer Matrix Composite, Acta Materialia, 44(4): 1519–1528.

15.

Ha, S.K. (2002). Micromechanics in the Analysis of Composite Structures, In: 6th Composites Durability Workshop (CDW-6), Tokyo, Japan, November 14–15.

16.

Tay, T.E. , Tan, V.B.C. and Tan, S.H.N. (2005). Element-Failure: An Alternative to Material Property Degradation Method for Progressive Damage in Composite Structures, Journal of Composite Materials, 39(18): 1659–1675.