The Impact Properties of High-temperature Fiber-Metal Laminates

Abstract

This study investigates the low and high velocity impact properties of fiber–metal laminates (FMLs) based on carbon fiber-reinforced poly-ether-ether-ketone (CF/PEEK) and glass fiber-reinforced poly-ether-imide (GF/PEI) composites. The aim of this work is to develop a lightweight hybrid material for use in high temperature aerospace applications. Here, low velocity impact tests are undertaken using an instrumented impact tower and high velocity impact tests are conducted using a nitrogen gas gun. Low velocity impact testing has shown that the specific perforation energy of the CF/PEEK-based FMLs is similar to that offered by the CF/PEEK composite. In contrast, the specific perforation energy of the GF/PEI FML system is lower than that of the plain PEI composite. The experimental evidence suggests that the inclusion of strong titanium alloy plies does not improve the perforation resistance of these FMLs. High velocity impact tests resulted in failure processes similar to those observed under low velocity loading conditions, with the specific perforation energy of the GF/PEI-based FMLs being higher than those exhibited by the plain GF/PEI composite. An extensive and detailed optical microscope study has shown that interfacial and interlaminar delaminations are the principal energy-absorbing mechanisms during low and high velocity impacts.

Keywords

fiber metal laminates reinforced composite materials poly-ether-ether-ketone poly-ether-imide low and high velocity impact

References

Krishnakumar, S. (1994). Fiber Metal Laminates. The Synthesis of Metals and Composites , Materials and Manufacturing Processes, 9(2): 295–354 .

Vlot, A. , Vogelesang, L.B. and Vries, T.J. (1998). Fibre Metal Laminates for High Capacity Aircraft , In: 30th International SAMPE Technical Conference, pp. 456–470 .

Marsh, G. (2004). Composites Lift Off in Primary Aerostructures , Reinforced Plastics, 48(4): 22–27 .

Marsh, G. (2005). Airframers Exploit Composites in Battle for Supremacy , Reinforced Plastics, 49(3): 26–32 .

Cortes, P. and Cantwell, W.J. (2006). The Fracture Properties of a Fibre-metal Laminate Based on Magnesium Alloy , Composites Part B: Engineering, 37(2–3): 163–170 .

Rommel, M. , Konopka, L. and Kane, R. (1999). The Effect of Matrix Resins on the Mechanical Properties of Titanium/Composite Hybrid Laminates , In: 44th International SAMPE Symposium, Long Beach, California, May 23–27.

Johnson, W.S. , Li, E. and Miller, J.L. (1996). High Temperature Hybrid Titanium Composite Laminates: An Early Analytical Assessment , Applied Composite Materials, 3(6): 379–390 .

Li, E. and Johnson, W.S. (1998). An Investigation into the Fatigue of a Hybrid Titanium Composite Laminate , Journal of Composites Technology & Research, 20(1): 3–12 .

Cortes, P. and Cantwell, W.J. The Prediction of Tensile Failure in Titanium-based Thermoplastic Fibre-metal Laminates, Composites Science and Technology (in press) (available online 19 January 2006).

10.

Cortes, P. and Cantwell, W. J. Structure-properties Relations in Titanium-based Thermoplastic Fibre-metal Laminates , Polymer Composites, 27: 264–270 .

11.

Vlot, A. (1996). Impact Loading on Fibre Metal Laminates , International Journal of Impact Engineering, 18(3): 291–307 .

12.

Vlot, A. and Fredell, R.S. (1993). Impact Damage Resistance and Damage Tolerance of Fibre Metal Laminates , In: Proceedings of the 9th ICCM, Madrid, Spain, Jul 12–16, pp. 57–58 .

13.

Alderliesten, R.C. , Hagenbeek, M. , Homan, J.J. , Hooijmeijer, P.A. , De Vries, T.J. and Vermeeren, C.A.J.R. (2003). Fatigue and Damage Tolerance of GLARE , Applied Composite Materials, 10(4–5): 223–242 .

14.

Vlot, A. and Krull, M. (1997). Impact Damage Resistance of Various Fibre Metal Laminates , Journal of Physics IV France, 7(3): 1045–1050 .

15.

Sun, C.T. and Dicken, A. (1993). Characterization of Impact Damage in ARALL Laminates , Composites Science and Technology, 49(2): 139–144 .

16.

Vlot, A.K. , Kroon, E. and La Rocca, G. (1998). Impact Response of Fiber Metal Laminates , Key Engineering Materials, 141–143: 235–276 .

17.

Lawcock, G.D. , Ye, L. , Mai, Y.W. and Sun, C.T. (1997). Effects of Fibre/Matrix Adhesion on Carbon-fibre Reinforced Metal Laminates-II. Impact Behaviour , Composites Science and Technology, 57(12): 1661–1628 .

18.

Reyes, G. , Compston, P. , Guillen, F. , Cantwell, W.J. and Jones, N. (2001). The Impact Resistance of Thermoplastic-based Fibre Metal Laminates , In: Proceedings of the 13th ICCM, Beijing, China, June 25–29.