Behavioral modeling of a monolithically integrated three-axis capacitive accelerometer based on the MetalMUMPs process

Abstract

In this paper we present behavioral modeling of a monolithically integrated three-axis capacitive accelerometer using the standard MetalMUMPs process. The behavioral modeling is done in order to verify the design with respect to structural and electrostatic performance of the designed three-axis capacitive accelerometer. The proposed accelerometer is 3.2 mm × 3.5 mm in size, designed for sensing the acceleration of 25g in three axes. The mechanical noise floor for in-plane (x and y) and out-of-plane (z) axes is 0.291, 0.316, and 2.84 µg/√ (Hz), respectively. The total sense capacitance along the x, y, and z axes is 68.5 fF, 100 fF, and 6.19 pF, respectively. Sensitivity of 2.568 fF/g, 4 fF/g, and 0.252 pF/g is obtained for in-plane (x and y) and out-of-plane (z) axes, respectively. The resonance frequency for the designed accelerometer is 800 and 2500 Hz for in-plane and out-of-plane axes, respectively. The results obtained by behavioral modeling are compared with the analytical results, which are approximately the same.

Keywords

behavioral modeling CoventorWare MetalMUMPs micro electro-mechanical system monolithic three-axis accelerometer

References

Dosher

Kitchin

. Monitoring machine vibration with micromachined accelerometers. Sensors 1997; 14: 33–34.

Pottenger

. Design of micromachined inertial sensors. PhD Dissertation, University of California, 2001.

Tsuchiya

Funabashi

. A z-axis differential capacitive SOI accelerometer with vertical comb electrodes. Sensor Actuator Phys 2004; 116: 378–383.

Roylance

Angell

. Batch-fabricated silicon accelerometer. IEEE Trans Electron Devices 1979; 26: 1911–1917.

Yazdi

Ayazi

Najafi

. Micromachined inertial sensors. Proc IEEE 1998; 86: 1640–1658.

Yazdi

Najafi

. An All-Silicon Single-Wafer Micro-g Accelerometer with a Combined Surface and Bulk Micromachining. J Microelectromech Syst 2000; 9: 544–550.

Chae

Kulah

Najafi

. A monolithic three-axis micro-g micromachined silicon capacitive accelerometer. J Microelectromech Syst 2005; 14: 235–242.

Fang

Xie

. A Monolithic CMOS-MEMS 3-axis accelerometer with a low-noise, low-power dual-chopper amplifier. IEEE Sensor J 2008; 8: 1511–1518.

Mistry

Swamy

KBM

Sen

and Design of an SO. I-MEMS high resolution capacitive type single axis. J Microsyst Technol 2010; 16: 2057–2066.

10.

CoventorWare Architect. Version 2008. MEMS and Microsystems System- Level Design Coventor, Inc.

11.

Cowen

Mahadevan

Johnson

Hardy

. MetalMUMPs design handbook, Rev. 2.0. MEMSCAP Inc.

12.

Allen

. Micro ElectroMechanical systems design. CRC Press LLC, 2005, pp.278–280.

13.

Middelhoek

. Handbook of sensors and actuators. In: Bao

(ed.) Micro mechanical tranducers. Vol. 8, Elsevier, 2000.

14.

Jiang

Wang

Kraft

Boser

. An integrated surface micromachined capacitive lateral accelerometer with 2 µg/rtHz resolution. In: Proceedings of the Solid-State Sensors and Actuators Workshop, Hilton Head Island, SC, 2002, pp.202–205.