Producing Medium Count Yarns from Recycled Fibers with Friction Spinning

Abstract

Yams production from recycled fibers (RF) is limited, and spinners often prefer to produce coarse yams from these fibers. In this research, we attempt to produce middle- count twp-component and three-component yams from RF in such a way that the RF in the yarn core are completely covered by virgin cotton fibers. To improve the tensile properties of such yams, we produce a three-component yarn with a continuous filament in its core, RF in the middle layer, and virgin cotton fibers in the sheath, using a friction spinning machine modified for this purpose. The results show that the appearance of the 51/49 cotton/RF two-component yams is like that of a 100% cotton yarn, and the imperfections of the RF sliver have no significant effect on yarn appearance. The results also show that the strength of a two-component yarn is greater than that of a 100% RF yarn. Spinning a 30 tex yarn from 100% RF is very difficult, and the end breaks are extremely high. In practice, it is impossible to produce yarn from RF. However, producing a 30-tex two- component yarn using RF with new fibers in the sheath is easy and trouble-free, but the yarn is weak. The tensile properties of the yarn show that the strength and elongation of a 30-tex three-component core yarn are greater than those of an equivalent 100% cotton yarn, a cotton/RF yarn, and a 100% RF yarn. Also, the irregularity of the three-component core yarn is less than those of cotton/RF and RF yams. Thus, we show that medium count yams of acceptable appearance and tensile properties can be produced from RF.

References

Council for Textile Recycling Website, http://www. textilerecycle.org/.

Hamburger, Walter J. , The Industrial Application of the Stress-Strain Relationship, J. Textile Inst. 40, P700-718 (1949 ).

Kato, H. , Fujio, K. , Okamura, M. Merati, A.A. , and Saeki, H. , Yarn Tail Structure in Friction Spinning, Textile Res. J. 69 (3), 214-219 (1999).

Kimmel, L.B. , and Sawhney, A.P.S. , Comparison of DREF-3 Cottons Yam Produced by Varying Yam Core Ratios and Feed Rates, Textile Res. J. 60, 714-718 (1990).

Konda, F. , Okamura, M. , and Merati A.A. , Effect of Suction Air Pressure in Friction Spinning on Yam Properties , Textile Res. J. 66 (7), 446-452 (1996).

Konda, F. , Okamura, M. , Merati, A.A. , and Kato, H. , Simultaneous Measuring of Fiber Flow, Yam Tension and Yam Diameter in Friction Spinning, in "Proc. Conference on New Spinning Systems into the Future," Shanghai, China, November 1995.

Merati, A.A. , and Okamura, M. , A Unique Method of Producing Two-component Yams in Friction Spinning , in "Proc. 7th Asian Textile Conference," New Delhi, India, December 1-3, 2003.

Merati, A.A. , Konda, F. , Okamura , M. , and Marui, E. , Analysis of Yam Tension in the Yarn-Forming Zone in Friction Spinning, Textile Res. J. 67 (9), 643-653 (1997).

Merati, A.A. , Konda, F. , Okamura, M. , and Marui, E. , Effect of Filament Pre-Tension on Swctural Parameters and Mechanical Properties of Core Yam Friction Spinning, in " Proc 4th Asian Textile Conference," Taipei, Taiwan, June 24-26, 1997.

10.

Merati, A.A. , Konda, F. , Okamura , M. , and Marui, E. , False Twist in Core Yam Friction Spinning , Textile Res. J. 68 (6), 4.41-448 (1998 ).

11.

Merati, A.A. , Konda, F. , Okamura. M. , and Marui, E. , Filament Pre-Tension in Core Yarn Friction Spinning, Textile Res. J. 68 (4), 254-264 (1998).

12.

Merati, A.A. , Okamura, M. , and Marui, E. , Fiber Feeding onto the Yam Tail in Friction Spinning. Part I: Flow Pattern in the Fiber Transport Channel and Fiber Landing on the Yarn Tail, Textile Res. J. 70 (10), 894-91 (2000).

13.

Ministry of Economy, Trade, and Industry, Japan, A Report on a Survey and Investigation of the Business Model of Secondhand Clothes, (in Japanese) 2002.