Automatic Volumetric Measurement of Nanofiber Webs using Metaball Approximation Based on Scanning Electron Microscope Images

Abstract

Scanning electron microscope (SEM) images are an essential tool for identifying the microstructures of fibrous and polymeric materials. Useful information, including fiber orientation and radius distributions, can be retrieved from the SEM images. However, the image is two dimensional and its manual measurement is inevitable for acquiring volumetric information. This paper reconstructed the three-dimensional shape of the fibers by approximating the fibers with spheres known as metaballs. Image analysis techniques were used to generate metaballs and the volumetric information was calculated from the sizes and positions of the metaballs. The proposed method was tested with nano-scale polymer SEM images and automatic statistical measurements were compared with the manual measurements.

Keywords

scanning electron microscope image metaball approximation orientation vector radius distribution pore size distribution

References

Russ, J. , and Dehoff, R.T. , "Practical Stereology", 2nd edn, Plenum Press, New York, 1999.

Principe, E.L. , How to Use FIB-SEM Data for 3-D Reconstruction , R&D Magazine, 6, 29-30 (2005).

Sidhu, R.S. , and Chawla, N. , Three-dimensional Microstructure Characterization of Ag3Sn Intermetallics in Sn-rich Solder by Serial Sectioning, Mater. Charact., 52, 225-230 (2004).

Li, M. , Ghosh, S. , Richmond, O. , Weiland, H. , and Rouns, T.N. , Three Dimensional Characterization and Modeling of Particle Reinforced Metal Matrix Composites: Part I: Quantitative Description of Microstructural Morphology, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. , 265(1-2), 153-175 (1999).

Li, M. , Ghosh, S. , Richmond, O. , Weiland, H. , and Rouns, T.N. , Three Dimensional Characterization and Modeling of Particle Reinforced Metal Matrix Composites Part II: Damage Characterization, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 266, 221-240 ( 1999).

Bhandari, Y. , Sarkar, S. , Groeber, M. , Uchic, M.D. Dimiduk, D.M. , and Ghosh, S. , 3D Polycrystalline Microstructure Reconstruction from FIB Generated Serial Sections for FE Analysis, Comput. Mater. Sci., 41, 222-235 (2007).

Schroeder-Reiter, E. , Pérez-Willard , F. , Zeile, U. , and Wanner, G. , Focused Ion Beam (FIB) Combined with High Resolution Scanning Electron Microscopy: A Promising Tool for 3D Analysis of Chromosome Architecture, J. Struct. Biol., in press (2008).

Samak, D. , Fischer, A. , and Rittel, D. , 3D Reconstruction and Visualization of Microstructure Surfaces from 2D Images , CIRP Annals - Manufacturing Technology, 56(1), 149-152 (2007).

Paluszyński, J. , and Slówko , W. , Surface Reconstruction with the Photometric Method in SEM, Vacuum, 78(2-4), 533-537 (2005).

10.

Lee, T. , Kashyap, R.L. , and Chu, C. , Building Skeleton Models via 3-D Medial Surface/Axis Thinning Algorithms, Graph. Models Image Process., 56(6), 462-478 (1994).

11.

Canny, J. , A Computational Approach to Edge Detection, IEEE Trans. Pattern Anal. Mach. Intell., 8, 679-714 (1986).

12.

Heckbert, P. , A seed fill algorithm, in "Graphics Gems", Academic Press, Boston, 1990.

13.

Blinn, J.F. , A Generalization of Algebraic Surface Drawing, ACM Trans. Graph., 1(3), 235-256 (1982).

14.

Lorensen, W.E. , and Cline, H.E. , Marching Cubes : A High Resolution 3D Surface Construction Algorithm, ACM SIGGRAPH Comput. Graphs., 21(4), 163-169 (1987).