Shape Optimization of a Double-Layer Space Truss Described by a Parametric Surface

Abstract

A method is presented for finding the optimal configuration of a double-layer space truss described by a parametric surface. The number of design variables is drastically reduced, without sacrificing the smoothness of the upper layer surface, by using the control net parameters as design variables. The coordinates of the lower nodes are defined by using a vertical or normal offset vectors from the upper surface. Curvatures of the curve associated with the lower polygon are calculated for evaluating feasibility and regularity of the a double-layer lattice space truss. In the examples, a feasible optimum design, which minimizes compliance under constraints on structural volume, are successfully found by using the proposed method. It is shown that the optimal solutions strongly depend on the specified ratios of the cross-sectional areas of the members.

Get full access to this article

View all access options for this article.

References

Kirsch

, Optimal topologies of truss structures, Appl. Mech. Rev., Vol. 42, pp. 223-239, 1989.

Topping

B.H.V.

, Mathematical programming techniques for shape optimization of skeletal structures, in: Shape and Layout Optimization of Structural Systems and Optimality Criteria Methods, Rozvany

G.I.N.

(Ed.), Springer, Wien, 1992.

Nakamura

Tsuneyoshi

and Ohsaki

, A Natural Generator of Optimum Topology of Plane Trusses for Specified Fundamental Frequency, Camp Meth. Appl. Mech. Engng., Vol. 94(1), 1992, pp. 113-129.

Lin

J.H.

, Che

W.Y.

and Yu

Y.S.

, Structural optimization on geometrical configuration and dynamical constraints, Int. J. Comp. & Struct., 15(5), 1982, pp. 507-515.

Imai

and Schmit

L.A.

Jr , Configuration Optimization of Trusses, J. Struct. Div. ASCE, Vol. 107(ST5), 1981, pp. 745-756.

Svanberg

, Optimization of geometry in truss design, Comp. Meth. Appl. Mech. Engng., Vol. 28, 1981, pp. 63-80.

Saka

M.P.

, Shape Optimization of Trusses, J. Struct. Div. ASCE, Vol. 106(ST5), 1980, pp. 1155-1174.

Sadek

E.A.

, Dynamic Optimization of Framed Structures with Variable Layout, Int. J. Numer. Meth. Engng., Vol. 23, 1986, pp. 1273-1294.

Faux

I.D.

and Pratt

M.J.

, Computational Geometry for Design and Manufacture, Ellis Horwood, 1979.

10.

Farin

, Curves and Surfaces for Computer Aided Geometric Design, Academic Press, 1988.

11.

Rogers

D.F.

and Adams

J.A.

, Mathematical Elements for Computer Graphics, McGraw-Hill, 1990.

12.

Barnhill

(Ed.), Geometry Processing for Design and Manufacturing, SIAM, 1992.

13.

Haftka

R.T.

and Grandhi

R.V.

, Structural Shape Optimization – A Survey, Comp. Meth. Appl. Mech. Engng., Vol. 57, 1986, pp. 91-106.

14.

Braibant

and Fleury

, Shape Optimal Design Using B-splines, Comput. Meth. Appl. Mech. Engng., Vol. 44, 1984, pp. 247-267.

15.

Özakca

, Hinton

and Rao

N.V.R.

, Shape Optimization of Axisymmetric Structure with Adaptive Finite Element Procedures, Structural Optimization, Vol. 5, 1993, pp. 256-264.

16.

Eschenauer

H.A.

and Kobelev

V.V.

and Schumacher

, Bubble method for topology and shape optimization of structures, Structural Optimization, Vol. 8, 1994, pp. 42-51.

17.

Ramm

and Bletzinger

K.-U.

and Reitinger

, Shape Optimization of Shell Structures, Bulletin of the International Association for Shell and Spatial Structures, IASS, Vol. 34(112), 1993, pp. 103-121.

18.

Hoschek

, Offset Curves in the Plane, Comput. Aided Design, Vol. 17, 1985, pp. 77-82.

19.

Hoschek

and Wissel

, Optimal Approximate Conversion of Spline Curves and Spline Approximation of Offset Curves, Comput. Aided Design, Vol. 20, 1988, pp. 475-483.

20.

Pedersen

, Cheng

and Rasmussen

, On accuracy problem for semi-analytical sensitivity analysis, Mech. Struct. & Mach., Vol. 17, 1989, pp. 373-384.

21.

Haug

E.J.

, Choi

K.K.

and Komkov

, Design Sensitivity Analysis of Structural Systems, Academic Press, Orlando, 1986.

22.

Faber

, Candela: The Shell Builder, Reinhold, New York, 1963.

23.

Arora

J.S.

, Introduction to Optimal Design, McGraw-Hill, New York, 1989.

24.

Belegundu

A.D.

and Arora

J.S.

, A recursive quadratic programming method with active set strategy for optimal design, Int. J. Numer. Meth. Engng., Vol. 20, 1984, pp. 803-816.

25.

Nakamura

Tsuneyoshi

and Ohsaki

, Sequential optimal truss generator for frequency ranges, Comp. Meth. Appl. Mech. Engng., Vol. 67, 1988, pp. 189-209.