Property Identification of the Singularity Loci of a Class of Gough-Stewart Manipulators

Abstract

In this paper we address the problem of identifying the property of the singularity loci of a class of 6/6-Gough-Stewart manipulators in which the moving and base platforms are two similar semiregular hexagons. After constructing the Jacobian matrix of this class of 6/6-Gough-Stewart manipulators according to the theory of statical equilibrium, we derive a cubic polynomial expression in the moving platform position parameters, which represents the constant-orientation singularity locus of the manipulator. Graphical representations of the singularity locus of the manipulator for different orientations are quite various and complex. Further, we analyze the singularity locus of this class of 6/6-Gough-Stewart manipulators in the principal section, where the moving platform lies. This shows that singularity loci of this class of 6/6-Gough-Stewart manipulators in parallel principal sections are all quadratic expressions. We have also found that, for this class of 6/6-Gough-Stewart manipulators, there are also some special singularity cases in which six lines associated with the six extensible links of the manipulator can intersect one common line and the unwanted instantaneous motion of the manipulator is a pure rotation.

References

Chan, V.K. and Ebert-Uphoff, I. 2000. Investigation of the deficiencies of parallel manipulators in singular configurations through the Jacobian nullspace . Proceedings of the IEEE International Conference on Robotics and Automation, Seoul, Korea.

Collins, C.L. and McCarthy, J.M. 1997. The singularity loci of two triangular parallel manipulator . Proceedings of the IEEE International Conference on Advanced Robotics (ICAR ’97), Monterey, CA, July 7-9, pp. 473-478 .

Di Gregorio, R. 2001. Analytic formulation of the 6-3 fully parallel manipulator’s singularity determination . Robotica 19: 663-667 .

Di Gregorio, R. 2002. Singularity locus expression of a class of parallel mechanisms . Robotica 20: 323-328 .

Fitcher, E.F. 1986. A Stewart platform-based manipulator: general theory and practical construction . International Journal of Robotics Research 5(2): 157-182 .

Gosselin, C.M. and Angeles, J. 1990. Singularity analysis of closed-loop kinematic chains . IEEE Transactions on Robotics and Automation 6(3): 281-290 .

Gosselin, C.M. and Wang, J. 1995. Singularity loci of planar parallel manipulators . Proceedings of the 9th World Congress on the Theory of Machines and Mechanisms, Milano, Italy, pp. 1982-1986 .

Huang, Z. and Qu, Y.Y. 1987. The analysis of the special configuration of the spatial parallel manipulators . Proceedings of the 5th National Mechanism Conference, Lu Shan, China, pp. 1-7 .

Huang, Z., Kong, L.F., and Fang, Y.F. 1997. Theory and Control of Parallel Robotic Mechanisms Manipulator. Publisher of Mechanical Industry, Beijing, China .

10.

Huang, Z., Zhao, Y.S., Wang, J. and Yu, J.J. 1999. Kinematic principle and geometrical condition of general-linear-complex-special-configuration of parallel manipulators . Mechanism and Machine Theory 34(8): 1171-1186 .

11.

Huang, Z., Chen, L.H., and Li, Y.W. 2003a. The singularity principle and property of Stewart manipulator . Journal of Robotic Systems 20(4): 163-176 .

12.

Huang, Z., Chen, L.H., and Li, Y.W. 2003b. Singular loci analysis of 3/6-Stewart manipulator by singularity equivalent mechanism . Proceedings of the IEEE International Conference on Robotics and Automation, Taipei, Taiwan, pp. 1811-1886 .

13.

Hunt, K.H. 1983. Structural kinematics of in-parallel actuated robot arms . ASME, Journal of Mechanical Transmissions and Automated Design 105: 705-712 .

14.

Karger, A. 2001. Singularities and self-motions of equiform platforms . Mechanism and Machine Theory 36(7): 801-805 .

15.

Ma, O. and Angeles, J. 1991. Architecture singularity of platform manipulators . Proceedings of the IEEE International Conference on Robotics and Automation, Sacramento, CA, pp. 1542-1547 .

16.

Mayer St-Onge, B. and Gosselin, C.M. 2000. Singularity analysis and representation of the general Gough-Stewart platform . International Journal of Robotics Research 19(3): 271-288 .

17.

Merlet, J.P. 1988. Parallel manipulator part 2: singular configurations and Grassmann geometry. Technical report, INRIA, Sophia Antipolis, Valbonne, France .

18.

Merlet, J.P. 1989. Singular configurations of parallel manipulators and Grassmann geometry . International Journal of Robotics Research 8(5): 45-56 .

19.

Merlet, J.P. 1992. Singular configuration and direct kinematics of a new parallel manipulator . Proceedings of the IEEE International Conference on Robotics and Automation, Nice, France.

20.

Sefrioui, J. and Gosselin, C.M. 1994. Etude et representation des lieux de singularite des manipulateurs paralleles spheriques à trois degrees de liberte avec actionneurs prismatiques . Mechanism and Machine Theory 29(4): 559-579 .

21.

Sefrioui, J. and Gosselin, C.M. 1995. On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulators . Mechanism and Machine Theory 30(4): 533-551 .

22.

Stewart, D. 1965. A platform with six degrees of freedom . Proceedings of the Institute of Mechanical Engineers 180: 371-378 .

23.

Sugimoto, K., and Duffy J., 1981. Special configuration of industrial robots . Proceedings of the 11th International Symposium on Industrial Robots (ISIR), Tokyo, Japan, pp. 309-316 .

24.

Wang, G.Z. 1998. Singularity analysis of a class of the 6-6 Stewart platforms . Proceedings of the ASME Design Engineering Technical Conference (DETC’98), Atlanta, GA.

25.

Wang, J. and Gosselin, C.M. 1996. Kinematic analysis and singularity loci of spatial four-degree-of-freedom parallel manipulators . Proceedings of the ASME Design Engineering Technical Conference and Computers in Engineering Conference, Irvine, CA.