This paper presents a new control architecture for fast, accurate force control of antagonistic pairs of shape memory alloy wires. The main components are: a differential-mode controller which controls the output force, an anti-slack mechanism, a rapid-heating mechanism and an anti-overload mechanism. The closed-loop response is fast and accurate, even in the presence of large external motion disturbances. There is no sign of limit cycles, and the performance is unaffected by large load inertias. This paper also presents an architecture for position control, in which a position feedback loop is added to the force control architecture. Experimental results show force control accuracies as high as 1 mN in a 13 N range, force output rates as high as 50 N s21, and highly accurate position control with steady-state errors below the resolution of the position encoder.
Ashrafiuon, H., Eshraghi, M., and Elahinia, M.H. (2006). Position Control of a 3-Link Shape Memory Alloy Actuated Robot. Journal of Intelligent Material Systems & Structures, 17: 381-392.
2.
Bergamasco, M., Dario, P., and Salsedo, F. (1990). Shape Memory Alloy Microactuators. Sensors & Actuators A: Physical, 21(1-3): 253-257.
3.
Choi, S.B., Han, Y.M., Kim, J.H., and Cheong, C.C. (2001). Force Tracking Control of a Flexible Gripper Featuring Shape Memory Alloy Actuators. Mechatronics, 11: 677- 690.
4.
Dickinson, C.A., and Wen, J.T. (1998). Feedback Control Using Shape Memory Alloy Actuators . Journal of Intelligent Material Systems & Structures , 9(4): 242-250.
5.
Dynalloy, Inc. (Last accessed 10 December 2007). Flexinol® Technical Datahttp://www.dynalloy.com/TechnicalData.html.
6.
Elahinia, M.H., and Ashrafiuon, H. (2002). Nonlinear Control of a Shape Memory Alloy Actuated Manipulator. Journal of Vibration & Acoustics, Transactions of the ASME, 124: 566-575.
7.
Featherstone, R., and Teh, Y.H. (2004). Improving the Speed of Shape Memory Alloy Actuators by Faster Electrical Heating. In Proceedings of 9th International Symposium on Experimental Robotics, Singapore, June 18-21, paper ID 128.
8.
Featherstone, R., and Teh, Y.H. (2005). A Shape Memory Alloy Actuator. International patent application no. PCT/AU2005/000154.
9.
Featherstone, R., and Teh, Y.H. (2006). A Shape Memory Alloy Actuator. Australian patent application no. 2005210682.
10.
Fu, Y., Du, H., Huang, W., Zhang, S., and Hu, M. (2004). TiNibased Thin Films in MEMS Applications: A Review . Sensors & Actuators A: Physical, 112(2-3): 395-408.
11.
Gorbet, R.B., and Russell, R.A. (1995). A Novel Differential Shape Memory Alloy Actuator for Position Control. Robotica, 13: 423-430.
12.
Grant, D. (1999). Accurate and Rapid Control of Shape Memory Alloy Actuators. Ph.D. Thesis, McGill University.
13.
Grant, D., and Hayward, V. (1997a). Controller for a High Strain Shape Memory Alloy Actuator: Quenching of Limit Cycles. In Proceedings of IEEE International Conference on Robotics & Automation, 1: 254-259.
14.
Grant, D., and Hayward, V. (1997b). Variable Structure Control of Shape Memory Alloy Actuators. IEEE Systems and Control Magazine, 9(3): 80-88.
15.
Grant, D., and Hayward, V. (2000). Constrained Force Control of Shape Memory Alloy Actuators. In Proceedings of IEEE International Conference on Robotics & Automation, 2: 1314-1320.
16.
Hunter, I.W., Lafontaine, S., Hollerbach, J.M., and Hunter, P.J. (1991). Fast Reversible NiTi Fibers for Use in Microrobotics. Micro Electro Mechanical Systems. In Proceedings of MEM'91: `An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots', 166-170.
17.
Ikuta, K., Tsukamoto, M., and Hirose, S. (1988). Shape Memory Alloy Servo Actuator System with Electric Resistance Feedback and Application for Active Endoscope. In Proceedings of IEEE International Conference on Robotics & Automation, 1: 427-430.
18.
Kohl, M. (2004). Shape Memory Microactuators. Springer, Verlag Berlin Heidelberg.
19.
Kuribayashi, K. (1991). Improvement of the Response of an SMA Actuator Using a Temperature Sensor. International Journal of Robotics Research, 10(1): 3-20.
20.
Liang, C., and Rogers, C.A. (1993). Design of Shape Memory Alloy Springs with Applications in Vibration Control. Journal of Vibration & Acoustics , 115: 129-135.
21.
Madill, D.R., and Wang, D. (1998). Modeling and L2-Stability of a Shape Memory Alloy Position Control System. IEEE Transactions on Control Systems Technology, 6(4): 473- 481.
22.
Moallem, M., and Lu, J. (2005). Application of Shape Memory Alloy Actuators for Flexure Control: Theory and Experiments. IEEE/ASME Transactions on Mechatronics, 10(5): 495-501.
23.
Mosley, M.J., and Mavroidis, C. (2001). Experimental Nonlinear Dynamics of a Shape Memory Alloy Wire Bundle Actuator. Transactions of ASME, Journal of Dynamic Systems, Measurement & Control, 123(1): 103-112.
24.
Russell, R.A., and Gorbet, R.B. (1995). Improving the Response of SMA Actuators. In Proceedings of IEEE International Conference on Robotics & Automation, 3: 2299- 2304.
25.
Teh, Y.H. (2007). Fast, Accurate Force and Motion Control of Shape Memory Alloy Actuators. Ph.D. Thesis, Dept. Information Engineering, The Australian National University, Canberra , Australia.
26.
Teh, Y.H., and Featherstone, R. (2004). Experiments on the Performance of a 2-DOF Pantograph Robot Actuated by Shape Memory Alloy Wires. In Proceedings of Australasian Conference on Robotics & Automation, Canberra, Australia, Dec. 6-8.
27.
Teh, Y.H., and Featherstone, R. (2005). Experiments on the Audio Frequency Response of Shape Memory Alloy Actuators. In Proceedings of Australasian Conference on Robotics & Automation, Sydney, Australia, Dec. 5-7.
28.
Teh, Y.H., and Featherstone, R. (2007a). Accurate Force Control and Motion Disturbance Rejection for Shape Memory Alloy Actuators. In Proceedings of IEEE International Conference on Robotics & Automation, Rome, Italy, Apr. 10-14.
29.
Teh, Y.H., and Featherstone, R. (2007b). Frequency Response Analysis of Shape Memory Alloy Actuators. In Proceedings of International Conference on Smart Materials & Nanotechnology in Engineering , Harbin, China, Jul. 1-4.
30.
Troisfontaine, N., Bidaud, P., and Dario, P. (1997). Control Experiments on Two SMA Based Micro-Actuators . In Proceedings of Fifth International Symposium on Experimental Robotics, Spring-Verlag, pp. 490-499.
31.
Van der Wijst, M. (1998). Shape Control of Structure and Materials with Shape Memory Alloys. Ph.D. Thesis, Technische UniversiteitEindhoven.
32.
Van Humbeeck, J. (1999). Non-Medical Applications of Shape Memory Alloys . Materials Science & Engineering A, 273- 275: 134-138.
33.
Waram, T. (1993). Actuator Design Using Shape Memory Alloys. Tom Waram, 2nd (Metric) Edition. T.C. Waram, Ontario, Canada.
34.
Zhong, Z.W., and Yeong, C.K. (2006). Development of a Gripper using SMA Wire. Sensors & Actuators A: Physical, 126: 375-381.
