The Introduction of Technology for Producing Thin,Multilayer,Polyethylene Heat Shrink Films with Improved Processing and Service Characteristics

Abstract

An analysis is made of the characteristics of films based on recycled polyethylene and a developed composite material for the production of three-layer shrink wrap film of 50 μm thickness with improved processing and service properties. The results of research into modifying the composite and optimising the technology for producing multilayer shrink films are presented.

Get full access to this article

View all access options for this article.

References

GOST 10354–82, Polyethylene film. Specifications. Standartinform, Moscow (2007).

GOST 25951–83, Polyethylene heat shrink film. Specifications. Standartinform, Moscow (2007).

GOST 14.322–83. Standardisation of the consumption of materials. Main points. Standart, Moscow (2003).

GOST 14236.81. Polymer films. Tensile test method. Standart, Moscow (1989).

Danilova-Volkovskaya

G.M.

Calculation of the optimum technological extrusion regimes using a mathematical model of the process and extrapolation to high-throughput equipment. Khim. Tekhnol. Segodnya, (2) (2005).

Adel-Bari

E.M.

(ed.), Polymer Films, translation editor G.E. Zaikov. Professiya, St Petersburg, 352 pp. (2005).