Artificial Latexes of Butyl Rubber and Styrene Diene Thermoplastic Elastomer,Stabilised with a Mixture of Silicone and Cationic Surface-active Substances
Available accessResearch articleFirst published online October, 2017
Artificial Latexes of Butyl Rubber and Styrene Diene Thermoplastic Elastomer,Stabilised with a Mixture of Silicone and Cationic Surface-active Substances
The influence of the mass ratio of silicone and cationic surface-active substances of different nature on the colloid chemical properties and stability of artificial latexes of butyl rubber and styrene diene thermoplastic elastomer is shown.
References
1.
LazurinE.A., The Production, Properties, and Application of Non-Emulsion Polymers.TsNIITEneftekhim, Moscow, 77 pp. (1981).
2.
SoniS.S., Effect of non-electrolytic additives on micellization and clouding behavior of silicone surfactant in aqueous solutions. Colloids Surf. A: Physicochem. Eng. Aspects, 377: 205–211 (2011).
3.
BotovO.I., The production of artificial latexes based on a styrene isoprene thermoplastic elastomer. Vestn. MITKhT, IX(5): 61–63 (2014).
4.
BotovO.I., The influence of the nature and concentration of emulsifier on the degree of dispersion and stability of artificial latexes with a positive particle charge. Kauch. i Rezina, (5): 8–11 (2015).
5.
HillR.M. (ed.), Silicone Surfactants.CRC Press, Michigan, 376 pp. (1999).
