A comparison between rapid expressions for evaluation of the critical J-integral in plates with U-notches under mode I loading

Abstract

In this paper, some practical linear-elastic equations for evaluation of the critical value of the J-integral in plates with U-notches under mode I loading are presented and applied to brittle and quasi-brittle materials. The relationship between the J-integral and strain energy averaged over a well-defined control volume, depending on the static properties of the material, is applied, with the aim of obtaining the final expressions. It is found that these three proposed equations provide the same results, with any differences being negligible. By using one of these equations, one can evaluate J_cr and then predict the critical fracture load by means of the J_cr criterion. The results have shown that the critical value of the J-integral (J_cr) is a function of the ratio of the material control radius to the notch-root radius (R_c/ρ), the ratio of specimen width to notch depth (w/a), the notch acuity (a/ρ), and the loading condition (tensile or bending loadings) in U-notches under mode I loading. However, the effect of the loading condition, a/ρ and w/a ratios may be negligible. Therefore only the R_c/ρ ratio (i.e. the material properties and the notch-root radius of the specimen) affects J_cr.

Keywords

brittle fracture elasticity J-integral SED mode I loading U-notches

Get full access to this article

View all access options for this article.

References

Gómez

F. J.

Elices

Valiente

Cracking in PMMA containing U-shaped notches. Fatigue Fract. Engng Mat. Struct., 2000, 23(9), 795–803.

Lazzarin

Zambardi

A finite-volume-energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches. Int. J. Fracture, 2001, 112(3), 275–298.

Gómez

F. J.

Elices

Fracture of components with V-shaped notches. Engng Fract. Mech., 2003, 70(14), 1913–1927.

Yosibash

Bussiba

Gilad

Failure criteria for brittle elastic materials. Int. J. Fracture, 2004, 125(3–4), 307–333.

Planas

A note on pseudo-cohesive behaviour in quasi-bidimensional brittle fracture. Engng Fail. Anal., 2009, 162(8), 2513–2520.

Mammano

G. S.

Dragoni

Stress concentrations around a pressurized hole close to a uniformly loaded boundary. J. Strain Anal. Engng Des., 2009, 44(7), 569–582.

Dragoni

Castagnetti

Concentration of normal stresses in flat plates and round bars with periodic notches. J. Strain Anal. Engng Des., 2010, 45(7), 569–582.

Zappalorto

Lazzarin

Stress fields due to inclined notches and shoulder fillets in shafts under torsion. J. Strain Anal. Engng Des., 2011, 46(3), 187–199.

Hills

D. A.

Dini

Magadu

Korsunsky

A. M.

A review of asymptotic procedures in stress analysis: known solutions and their applications. J. Strain Anal. Engng Des., 2004, 39(6), 553–568.

10.

Duò

Korsunsky

A. M.

Hills

D. A.

The application of asymptotic analysis for modes I and III semi-infinite wedge solutions to a circumferentially notched shaft. J. Strain Anal. Engng Des., 2005, 40(3), 255–262.

11.

Sih

G. C.

A special theory of crack propagation In Methods of analysis and solutions of crack problems (Ed. Sih

G. C.

), 1973, pp. 21–45 (Noordhoff, Leyden).

12.

Sih

G. C.

Strain-energy-density factor applied to mixed mode crack problems. Int. J. Fract., 1974, 10(3), 305–321.

13.

Sih

G. C.

Surface layer energy and strain energy density for a blunted crack or notch. In Prospects of fracture mechanics (Eds van Elst

H. C.

Broek

), 1974, pp. 85–102 (Noordhoff, Leyden, 1974).

14.

Sih

G. C.

Mechanics of fracture initiation and propagation:Surface and volume energy density applied as failure criterion, 1991 (Kluwer Academic, Dordrecht).

15.

Sih

G. C.

J. W.

Sharp notch fracture strength characterized by critical energy density. Theor. Appl. Fract. Mech., 1991, 16(3), 179–214.

16.

Tang

X. S.

Sih

G. C.

Weak and strong singularities reflecting multiscale damage: micro-boundary conditions for free–free, fixed–fixed and free–fixed constraints. Theor. Appl. Fract. Mech., 2005, 43(1), 5–62.

17.

Rice

J. R.

A path independent integral and the approximate analysis of strain concentration by notches and cracks. J. Appl. Mech., 1968, 35, 379–386.

18.

Atluri

S. N.

Computational methods in the mechanics of fracture, 1987 (North-Holland, Amsterdam).

19.

Anderson

T. L.

Fracture mechanics: Fundamentals and applications, 2005 (CRC, Boca Raton/Taylor & Francis, London).

20.

Omer

Yosibash

Costabel

Dauge

Edge flux intensity functions in polyhedral domains and their extraction by a quasidual function method. Int. J. Fracture, 2004, 129(2), 97–130.

21.

Yosibash

Shannon

Dauge

Costabel

Circular edge singularities for the Laplace equation and the elasticity system in 3-D domains. Int. J. Fracture, 2011, 168(1), 31–52.

22.

Shih

C. F.

Hutchinson

J. W.

Fully plastic solutions and large-scale yielding estimates for plane stress crack problems. J. Engng Mat. Technol., 1976, 98(4), 289–295.

23.

Matvienko

Y. G.

J estimation formulas for nonlinear crack problems. Int. J. Fracture, 1994, 68(1), R15–R18.

24.

Matvienko

Y. G.

Morozov

E. M.

Calculation of the energy J-integral for bodies with notches and cracks. Int. J. Fracture, 2004, 125(3–4), 249–261.

25.

Matvienko

Y. G.

Muravin

E. L.

Numerical estimation of plastic J-integral by the load separation method for inclined cracks under tension. Int. J. Fracture, 2011, 168(2), 251–257.

26.

Lazzarin

Berto

Radaj

Fatigue-relevant stress field parameters of welded lap joints: pointed slit tip compared with keyhole notch. Fatique Fract. Engng Mat. Struct., 2009, 32(9),713–735.

27.

Livieri

A new path independent integral applied to notched components under mode I loadings. Int. J. Fracture, 2003, 123(3–4), 107–125.

28.

Chen

Y. H.

T. J.

On the path dependence of the J-integral in notch problems. Int. J. Solids Struct., 2004, 41(3–4), 607–618.

29.

Livieri

Use of J-integral to predict static failures in sharp V-notches and rounded U-notches. Engng Fract. Mech., 2008, 75(7), 1779–1793.

30.

Berto

Lazzarin

Relationships between J-integral and the strain energy evaluated in a finite volume surrounding the tip of sharp and blunt V-notches. Int. J. Solids Struct., 2007, 44(14–15), 4621–4645.

31.

Berto

Lazzarin

Matvienko

Y. G.

J-integral evaluation for U- and V-blunt notches under mode I loading and materials obeying a power hardening law. Int. J. Fracture, 2007, 146(1–2), 33–51.

32.

Barati

Alizadeh

Aghazadeh

Berto

Some new practical equations for rapid calculation of J-integral in plates weakened by U-notches under bending. Mat. Des., 2010, 31(6), 2964–2971.

33.

Lazzarin

Berto

Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches. Int. J. Fracture, 2005, 135(1–4), 161–185.

34.

Berto

Lazzarin

Gómez

F. J.

Elices

Fracture assessment of U-notches under mixed mode loading: two procedures based on the equivalent local mode I concept. Int. J. Fracture, 2007, 148(4), 415–433.

35.

Berto

Barati

Fracture assessment of U-notches under three-point bending by means of local energy density. Mat. Des., 2011, 32(2), 822–830.

36.

Lazzarin

Berto

Elices

Gómez

Brittle failures from U- and V-notches in mode I and mixed, I+II, mode: a synthesis based on the strain energy density averaged on finite size volumes. Fatigue Fract. Eng. Mater. Struct., 2009, 32(8), 671–684.

37.

Berto

Lazzarin

A review of the volume-based strain energy density approach applied to V-notches and welded structures. Theor. Appl. Fract. Mech., 2009, 52(3), 183–194.

38.

Gómez

F. J.

Elices

A fracture criterion for sharp V-notched samples. Int. J. Fracture, 2003, 123(3–4), 163–175.

39.

Gómez

F. J.

Elices

A fracture criterion for blunted V-notched samples. Int. J. Fracture, 2004, 127(3), 239–264.

40.

Gómez

F. J.

Elices

Planas

The cohesive crack concept: application to PMMA at −60°C. Engng Fract. Mech., 2005, 72(8), 1268–1285.

41.

Taylor

The theory of critical distances: A new perspective in fracture mechanics, 2007 (Elsevier Science, Oxford).