Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets
Restricted accessResearch articleFirst published online January, 2017
Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets
Numerical and experimental investigations of autogenous plasma arc welding of thin titanium alloy of 2 mm thick and modelling the temperature distribution for predicting the weld bead geometry are presented. The finite element code COMSOL Multiphysics is employed to perform non-linear unsteady heat transfer analysis using parabolic Gaussian heat source. Temperature-dependent material properties such as thermal conductivity, density and specific heat are used to enhance the efficiency of simulation process. A forced convective heat transfer coefficient was used to account for the effect of convection. The experimental trials were conducted by varying the welding speed and current using Fronius plasma arc welding equipment. The simulation results are in good agreement with the experimental results.
DonachieMJ.Titanium: a technical guide. 2nd ed.Materials Park, OH: ASM International, 2000.
3.
LeyensCPetersM.Titanium and titanium alloys: fundamentals and applications. Weinheim: Wiley-VCH Verlag GmbH & Co, 2003.
4.
LangfordG.Plasma arc welding for large titanium aerospace structures. SAE technical paper 660646, 1966.
5.
MartikainenJKMoisioTJI. Investigation of the effect of welding parameters on weld quality of plasma arc keyhole welding of structural steels. Weld Res Suppl1993; 2(7): 329s–340s.
6.
TsengKHHsiehSTTsengCC.Effect of process parameters of micro-plasma arc welding on morphology and quality in stainless steel edge joint welds. Sci Technol Weld Joi2003; 8(6): 423–430.
7.
WuCSWangHGZhangYM.A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile. Weld J2006; 85: 284s–291s.
8.
WuCSHuQXGaoJQ.An adaptive heat source model for finite-element analysis of keyhole plasma arc welding. Comp Mater Sci2009; 46(1): 167–172.
9.
ShortAMcCartneyDGWebbP. Parametric envelopes for keyhole plasma arc welding of a titanium alloys. In: Proceedings of the 8th international conference trends in welding research, Pine Mountain, GA, 1–6 June 2008, pp.690–696. Materials Park, OH: ASM International.
10.
DahaMANassefGAAbdullahIA. Three-dimensional thermal finite element modeling for keyhole plasma arc welding of 2205 duplex stainless steel plates. Int J Eng Tech2012; 2(4): 720–728.
11.
DahaMANassefGAAbdullahIA.Numerical modeling of heat transfer and fluid flow in keyhole plasma arc welding of dissimilar steel joints. Int J Eng Tech2012; 4(2): 506–512.
12.
DeshpandeAAShortASunW. Finite-element analysis of experimentally identified parametric envelopes for stable keyhole plasma arc welding of a titanium alloy. J Strain Anal Eng2012; 47(5): 266–275.
13.
LiTQWuCS.Numerical simulation of plasma arc welding with keyhole-dependent heat source and arc pressure distribution. Int J Adv Mater Technol2015; 78: 593–602.
14.
StenbackaN.On arc efficiency in gas tungsten arc welding. Soldagem Insp2013; 18(4): 380–390.
DhinakaranVSiva ShanmugamNSankaranarayanasamyK.Some studies on temperature field during plasma arc welding of thin titanium alloy sheets using parabolic Gaussian heat source model. Proc IMechE, Part C: J Mechanical Engineering Science. Epub ahead of print 21 December 2015. DOI: 10.1177/0954406215623574.
18.
LiYFengYHZhangXX. An improved simulation of heat transfer and fluid flow in plasma arc welding with modified heat source model. Int J Therm Sci2013; 64: 93–104.
19.
MetcalfeJCQuigleyBC.Heat transfer in plasma-arc welding. Weld J1975; 54(3): 99s–103s.
20.
OttHH.Heat transfer to a plate cooled by air. Schweiz Bauztg1961; 79: 834–840.
21.
Living HoodJNBHrycakP. Impingement heat transfer from turbulent air jets to flat plates – a literature survey. NASA technical memorandum, NASA TM X-2788, May1973, pp.1–42. Washington, DC: NASA.
22.
JamesWGauntner HerbertJGladden DanielJ. Cross flow effects on impingement cooling of a turbine vane. NASA technical memorandum, NASA TM X-3029, March1974, pp.1–19. Washington, DC: NASA.
JamshidiniaMKongFKovacevicR.Numerical modeling of heat distribution in the electron beam welding of Ti-6Al-4V. J Manuf Sci E: T ASME2013; 135: 061010-1–061010-14.
25.
ZhangTWuCSFengY.Numerical analysis of heat transfer and fluid flow in keyhole plasma arc welding. Numer Heat Tr A: Appl2011; 60(8): 685–698.
