The stress consequences of adding an auxiliary hole in the neighborhood of an original hole are determined from the load-induced thermal information when the geometric discontinuities are sufficiently close together that their respective stresses interact. The particular situation involves a smaller round hole near a larger round hole in a finite, isotropic tensile member where the holes are aligned in the direction of loading. Introducing a second hole reduces the stresses at each hole had it alone been present. The results correlate well with those from finite elements, strain gage and load equilibrium. The developed technology has relevance for isotropic, orthotropic or functionally graded materials.
JindalUC. Reduction of stress concentration around a hole in a uniaxially loaded plate. J Strain Anal Eng1983; 18(2): 35–141.
2.
RajaiahKNaikNK. Hole-shape optimization in a finite plate in the presence of auxiliary holes. Exp Mech1984; 24(2): 157–161.
3.
MeguidSAGongSX. Stress concentration around interacting circular holes: a comparison between theory and experiments. Eng Fract Mech1993; 44(2): 247–256.
4.
ProvidakisCPSotiropoulosDA. A BEM approach to the stress concentration reduction in visco-plastic plates by multiple holes. Comput Struct1997; 64(1): 313–317.
5.
RheeJChoHKMarrRJ. Local compliance, stress concentrations and strength in orthotropic materials. J Strain Anal Eng2012; 47(2): 113–128.
6.
NagpalSJainNSanyalS. Stress concentration and its mitigation techniques in flat plate with singularities—a critical review. Eng J2012; 16: 1–16.
7.
KonishHJWhitneyJM. Approximate stresses in an orthotropic plate containing a circular hole. J Compos Mater1975; 9: 157–166.
8.
HowlandRCJKnightRC. Stress function for plates containing groups of circular holes. Philos T Roy Soc A1939; 238: 357–392.
9.
GreenAE. General biharmonic analysis for a plate containing circular hole. P Soc Lond A1940; 176: 121–135.
10.
LingCB. On the stresses in a plate containing two circular holes. J Appl Phys1948; 19: 77–82.
11.
SavinGN. Stress concentration around holes. New York: Pergamon Press, 1961 (also Stress distribution around hole, NASA-TT-F-607, 1968).
12.
HulbertLE. The numerical solution of two-dimensional problems of theory of elasticity. PhD Thesis, Ohio State University, Columbus, OH, 1963.
13.
HaddonRAW. Stresses in an infinite plate with two unequal circular holes. Q J Mech Appl Math1967; 20: 277–291.
14.
MoriK. Stress distributions in a semi-infinite plate with a row of circular holes. Jpn Soc Mech Eng1972; 18(86): 899–906.
15.
UkadgaonkerVG. Stress analysis of a plate containing two circular holes having tangential stresses. AIAA J1980; 18(1): 125–128.
16.
KosmodamianskiiASChernikVI. Stress state of a plate weakened by two elliptical holes with parallel axes. Soviet Appl Mech1981; 17(6): 576–581.
17.
WahT. Stresses in polygonal plates with circular holes. Eng Fract Mech1986; 23: 489–493.
18.
LinJKUengCES. Stresses in a laminated composite with two elliptical holes. Compos Struct1987; 7: 1–20.
19.
ZimmermanRW. Stress singularity around two nearby holes. Mech Res Commun1988; 15: 87–90.
20.
ZimmermanRW. Second-order approximation for the compression of an elastic plate containing a pair of circular holes. ZAMM: Z Angew Math Me1988; 68: 575–577.
21.
ZimmermanRW. Stress concentration around a pair of circular holes in a hydrostatically stressed elastic sheet. J Appl Mech: T ASME1988; 55: 487–488.
22.
ZimmermanRW. Approximate expressions for stress concentrations in elastic solids containing multiple holes or notches. In: Proceedings of the ASME winter annual meeting, Atlanta, GA, 1–6 December 1991. New York: ASME.
23.
SoutisCFleckNACurtisPT. Hole-hole interaction in carbon-fiber/epoxy laminates under uniaxial compression. Composites1991; 22(1): 31–38.
24.
WooCWChanLWS. Boundary collocation method for analyzing perforated plate problems. Eng Fract Mech1992; 43(5): 757–768.
25.
YehHY. Mutual influence about stress concentrations of holes in composite plates. J Reinf Plast Comp1993; 12(1): 38–47.
26.
ShinCSManKCWangCM. A practical method to estimate the stress concentration of notches. Fatigue1994; 16: 242–256.
27.
XiwuXLiangxinSXuqiF. Stress concentration of finite composite laminates weakened by multiple elliptical holes. Int J Solid Struct1995; 32(20): 3001–3014.
28.
LinZY. Stress concentration analysis of stiffened composite laminates with multiple elliptical holes or inclusions. Chin J Comput Mech2008; 25(3): 379–384.
29.
AkbarovSDYahniogluNYesilUB. Interaction between two neighboring circular holes in a prestretched simply supported orthotropic strip under bending. Mech Compos Mater2008; 44(6): 581–590.
30.
ChengYF. Stress analysis of a members containing two semi-circular notches on the rim. Trans ASME Ser E1968; 35(1): 18–19.
31.
AjovalasitA. Photothermoelastic analysis of thermal stresses in discs with eccentric holes. J Strain Anal Eng1970; 5(3): 223–229.
32.
AtsumiAHataTKuraschigeM. Photothermoelastic and theoretical analysis of stresses in a circular disc having a pair of holes. In: Proceedings of the first international conference on structural mechanics in reactor technology, vol. 3: reactor components (ed JaegerTA), Berlin, 20–24 September 1971.
33.
GreeneRJPattersonEARowlandsRE. Chapter 26. Thermoelastic stress analysis. In: SharpeWM (ed.) Handbook of experimental solid mechanics. New York: Springer, 2008; 743–767.
LinSJMatthysDRRowlandsRE. Separating stresses thermoelastically in a central circularly perforated plate using an airy stress function. Strain2009; 45: 516–526.
36.
KhajaAA. Thermoelastically determined stresses around neighboring holes in a finite plate whose individual stress fields interact. MS Thesis, University of Wisconsin–Madison, Madison, WI, 2010.
JoglekarN. Separating stresses using airy stress function and TSA: effects of varying the amount and source locations of the input measured TSA data and number of airy coefficients to use. MS Thesis, University of Wisconsin–Madison, Madison, WI, 2009.
39.
JuSHRowlandsRE. Mixed-mode thermoelastic fracture analysis of orthotropic composites. Int J Fract Anal2003; 120: 601–621.
40.
Haj-AliRWeiBSJohnsonS. Thermoelastic and infrared-thermography methods for surface strains in cracked orthotropic composite materials. Eng Fract Mech2008; 75(1): 58–75.
