Bending Characteristics of Thick Multidirectional Composite Plates under Hygrothermal Environment

Abstract

Effects of moisture and temperature on the bending characteristics of thick multidirectional fibrous composite plates are studied. A three-dimensional finite element analysis procedure is developed using twenty noded isoparametric quadratic brick elements. A typical multidirectional unit cell is assumed to consist of several unidirectional composite blocks. Transformation-based relationships are used to generate the stiffness properties of a multidirectional composite model. The FE analysis accounts for the hygrothermal strains and reduced elastic properties of multidirectional composites at an elevated moisture concentration and temperature. Deflections and stresses are evaluated for thick multidirectional composite plates under uniform and linearly varying through-the-thickness temperature and moisture content. Results reveal the effects of fiber directionality on deflection and stresses.

Keywords

multidirectional composites hygrothermal thick plates unit cell

References

1. Wu, C.H. and Tauchert, T.R. (1980). Thermoelastic Analysis of Laminated Plates 1: Symmetric Specially Orthotropic Laminates , Journal of Thermal Stresses, 3: 247–259 .

2. Wu, C.H. and Tauchert, T.R. (1980). Thermoelastic Analysis of Laminated Plates 2: Antisymmetric Cross Ply and Angle Ply Laminate , Journal of Thermal Stresses, 3: 365–378 .

3. Reddy, J.N. and Hsu, Y.S. (1980). Effects of Shear Deformation and Anisotropy on the Thermal Bending of Layered Composite Plates , Journal of Thermal Stresses, 3: 475–493 .

4. Thangratnam, R. Kari. Palninathan , and Ramachandran, J. (1988). Thermal Stress Analysis of Laminated Composite Plates and Shells , Computers and Structures, 30: 1403–1411 .

5. Mukherjee, Nilanjan and Sinha, P.K. (1994). Three-dimensional Thermo Structural Analysis of Multidirectional Fibrous Composite Plates , Composite Structures, 28(3): 333–346 .

6. Whitney, J.M. and Ashton, J.E. (1971). Effect of Environment on the Elastic Response of Layered Composite Plates , AIAA J., 9: 1708–1713 .

7. Pipes, R.B. Vinson, J.R. and Chou, T.W. (1976). On the Hygrothermal Response of Laminated Composite Systems , J. Comp. Mater., 10: 129–148 .

8. Sai Ram, K.S and Sinha, P.K. (1991). Hygrothermal Effects on the Bending Characteristics of Laminated Composite Plates , Computers and Structures, 40(4): 1009–1015 .

9. Whitney, J.M. and McCoullough, R.L. (1990). Introduction to Anisotropic Elasticity, Micro Mechanical Materials Modeling, Vol. 2, Technomic Publishing Co. Inc., Lancanster Basel .

10.

10. Zienkiewicz, O.C. (1989). The Finite Element Method, McGraw-Hill Book Company, New Delhi .

11.

11. Hinton, E. Scott, F.C. and Ricketts, R.E. (1975). Local Least Squares Stress Smoothing for Parabolic Isoparametric Elements , Int. J. Num. Meth. Engg., 9: 235–256 .

12.

12. Timoshenko, S.P. and Krieger, S.W. (1959). Theory of Plates and Shells, 2nd edn, McGraw-Hill, New York .