In-mold Coating of Composites Manufactured by the Resin Infusion between Double Flexible Tooling Process by Means of Co-infusion

Abstract

As composite materials gain wider acceptance within the transportation industry, it is pertinent to investigate the available coating processes with a view to reducing emissions and associated costs. This work aims to develop a methodology for in-mold coating components manufactured using the resin infusion between double flexible tooling (RIDFT) process. RIDFT is a neoteric two-stage manufacturing process that involves (1) infusion of resin between two flexible silicone membranes until thorough wetting of the fibers is achieved and (2) vacuum forming, where the membranes are pulled over a one-sided mold. The viability of in-mold coating RIDFTed components is investigated. This work-in-process reports on successes and challenges presented during the co-infusion of a polyurethane enamel paint (DuPont Imron 5000) and a vinyl ester resin (Derakane 470-45). Methodologies for achieving co-infusion are investigated. It has been found that co-infusion is achievable with the use of an appropriate separation layer.

Keywords

resin infusion co-infusion in-mold coating composites

References

Thagard, J. R. , Okoli, O. I. , Liang, Z. , Wang, H.-P. and Zhang, C. (2003). Resin Infusion between Double Flexible Tooling: Prototype Development , Composites: Part A, 34(9): 803–811 .

Toro, N. , Okoli, O. I. and Wang, H.-P. (2005). In-Mold Coating of Composites Manufactured with the Resin Infusion between Double Flexible Tooling Process , Journal of Reinforced Plastics & Composites, 24(7): 722–733 .

Yamamoto, N. and Yagi, N. (1995). Development of Metal Plating on FRP Exterior Body Panels , JSAE Review, 16(2): 179–183 .

Rayle, J. W. and Cassil, D. W. (September 1995). Advancements in Injection In-mold Coating Technology , Metal Finishing, 93(9): 41-41 .

McCarthy, S. P. , Ellison, T. M. , Guan, Q. and Delusky, A. K. (2001). The Effect of Reinforcing Fiber Length on Surface Properties of Thermoplastic Composites Made by Surface Finishing/Compression Molding , In: Proc. NSF Workshop on Composite Sheet Forming, September 5–7, Lowell, MA, USA.

Zuyev, K. S. , Chen, X. , Cabrera-Rios, M. , Castro, J. M. and Straus, E. J. (2001). In-Mold Functional Coatings of Thermoplastic Substrates: Process Modeling , Journal of Injection Molding Technology, 5(2): 80–97 .

Gillio, E. F. , Advani, S. G. and Gillespie, Jr., J. W. (1998). Investigation of the Role of Transverse Flow in Co-Injection Resin Transfer Molding , Polymer Composites, 19(6): 738–746 .