Vibration Response of 3-D Space Accessible Sandwich Composite

Abstract

A 3-D sandwich composite comprising of E-glass core piles which are woven to the facesheets is considered in this work. This arrangement creates interstitial spaces in the core which can be used for foam infusion for sound/vibration damping, fluid storage, or for routing wires or inserts, in addition to providing strength. The vibroacoustic response of such multi-functional materials has received little attention and is an important issue when the structure witnesses mechanical vibrations. This article presents the vibration related studies carried out on the 3-D sandwich composite, infused with SC-15 resin. The frequency response function (FRF) and the damping ratios are the parameters of interest for this study. In this study the experimental data is presented for the unfoamed (as received) core configuration and the core filled with the polyurethane (PUR) foam. The average damping ratio of the unfoamed sandwich panel was found to be 0.55%. An increase of 150% in the damping ratio was observed for the PUR foam filled panels for a 77% increase in weight when compared to an unfoamed sandwich panel. Use of vibration as a non-destructive damage detection technique is demonstrated for beam specimens damaged by flexural loading. A reduction of 35% in the resonant frequency and 193% increase in the damping ratio was observed for approximately 6% core damage of the sandwich composite.

Keywords

multifunctional sandwich composite vibration damping damping ratio.

References

Vaidya, U.K. (1993). Nondestructive Evaluation of Graphite Fiber Based Composites Using Acoustic and Vibration Techniques, PhD dissertation, Auburn University.

Adams, R.D. (1987). Damping Properties Analysis of Composites, Engineering Materials Handbook, 206-217.

Li, Z. and Crocker, M.J. (2005). A Review on Vibration Damping in Sandwich Composite Structures, International Journal of Acoustics and Vibrations , 10(4): 159-169.

Chopra, A. (2000). Dynamics of Structures, Theory and Application to Earthquake Engineering, 2nd edn, Vol. 48, Prentice Hall, New Jersey.

Company Literature: www.earcomposites.com (Visited: April 22, 2005).

Rao, M.D. (2003). Recent Applications of Viscoelastic Damping for Noise Control in Automobiles and Commercial Airplanes , Journal of Sound and Vibration, 262(3): 457-474.

Nakra, B.C. (1976). Vibration Control With Viscoelastic Materials , Shock and Vibration Digest, 8(6): 3-12.

Schultz, A.B. and Warwick. D.N. (1971). Vibration Rresponse: A Non-destructive Test for Fatigue Crack Damage in Filament Reinforced Composites , Journal of Composite Materials, 5: 394-404.

Gibson, R.F. and Wilson, D.G. (1983). Dynamic Mechanical Properties of Fiber Reinforced Composite Materials and Structures, Shock and Vibration Digest , 15(2): 3-15.

10.

Ross, D. , Ungar, E.E. and Kerwin, E.M. (1959). Damping of Plate Flexural Vibrations by Means of Viscoelastic Laminate, Structural Damping, ASME, 49-88.

11.

Li, Z. and Crocker, M.J. (2005). A Review on Vibration Damping in Sandwich Composite Structures, International Journal of Acoustics and Vibrations , 10(4): 159-169.

12.

Li, Z. and Crocker, M.J. (2003). A Study of Damping in Sandwich Structures, In: Proceedings of the Tenth International Congress on Sound and Vibrations, pp. 2301-2308, Stockholm, Sweden.

13.

Mead, D. and Markus, J.S. (1969). The Forced Vibrations of a Three Layer, Damped Sandwich Beam With Arbitrary Boundary Conditions, Journal of Sound and Vibrations, 10(2): 163-175.

14.

Nilsson, E. and Nilsson, A.C. (2002). Prediction and Mmeasurement of Some Dynamic Properties of Sandwich Structures with Honeycomb and Foam Cores, Journal of Sound and Vibration, 251(3): 409-430.

15.

Company Literature: www.parabeam.nl (Visited: September 7, 2007)

16.

Vaidya, A.S. , Vaidya, U.K. and Uddin, N. (2005). Vibration Response of Multifunctional Sandwich Composites Applicable in Commercial Motor Vehicle Applications, SAMPE Conference, Long Beach, CA, USA.

17.

Vaidya, U.K. , Shriram, R. and Ricks, H. (2003). Vibration Damping Studies in Metal Foam Composite Sandwich Plates Subjected to Impact. In: Proceedings of the 10th International Congress on Sound and Vibration, pp. 2375-2382, Stockholm, Sweden.

18.

van Vuure, A.W. , Pflung, J. , Ivens, J.A. and Verpost, I. (2000). Modeling the Core Properties of Composite Panels Based on Woven Sandwich-fabric Preforms, Composites Science and Technology, 60: 1263-1276.