Hybrid composites of polypropylene reinforced with bamboo and glass fibers (BGRP) were fabricated using an intermeshing counter rotating twin screw extruder followed by injection molding. Maleic anhydride grafted polypropylene (MAPP) has been used as a coupling agent to improve the interfacial interaction between the fibers and matrix. The mechanical properties of the hybrid composites were studied from tensile, flexural, and impact tests. Mechanical tests indicated an increase in tensile, flexural, and impact strength of the BGRP hybrid composites at a bamboo:glass fiber ratio of 15:15 ratio in the presence of 2 wt% of MAPP. Nearly, 69, 86, and 83% increase in tensile flexural and impact strength respectively has been observed as compared with virgin PP. The fiber matrix interfacial morphology of the tensile fractured specimens was studied using scanning electron microscopy (SEM) which showed less fiber pullout and comparatively less gaps between the fiber and the base matrix in the case of MAPP treated hybrid composites. The crystallization, melting behavior and thermal stability of the hybrid composites were investigated employing differential scanning electron microscopy (DSC) and thermogravimetric analysis (TGA). Thermogravimetric analysis (TGA) showed an increase in thermal stability of the matrix polymer with incorporation of bamboo and glass fibers, confirming the effect of hybridization and efficient fiber matrix interfacial adhesion. The dynamic mechanical analysis (DMA) showed an increase in storage modulus (E′) indicating higher stiffness in case of hybrid composites as compared with untreated composites and virgin matrix. The tan δ spectra presented a strong influence of fiber content and coupling agent on the α and γ relaxation process of PP.
Coutinho, F.M.B. , Costa, T.H.S. and Carvalho , D.L. (1997). Polypropylene-wood Fiber Composites: Effect of Treatment and Mixing Conditions on Mechanical Properties, J. Appl. Polym. Sci., 65: 1227.
2.
Schneider, J.P. and Karmaker, A.C. ( 1995). Composites From Jute- and Kenaf-reinforced Polypropylene, ANTEC’ 95-, Vol. II - Materials, Boston, Massachusetts, USA, pp. 2086-2090.
3.
Mishra, H.K., Dash, B.N., Tripathy, S.S. and Padhi, B.N. ( 2000). A Study on Mechanical Performance of Jute-Epoxy Composites, Polym. Plast. Technol. Eng., 39: 187.
4.
Mohanty, A.K. , Khan, M.A. and Hinrichsen , G. (2000). Influence of Chemical Surface Modification on the Properties of Biodegradable Jute Fabrics-Polyester Amide Composites, Composites: Part A, 31: 143.
5.
Tripathy, S.S. , Di Landro, L., Fontanelli, D., Marchetti, A. and Levita, G. (2000). Mechanical Properties of Jute Fibers and Interface Strength with an Epoxy Resin, J. Appl. Polym. Sci., 75: 1585.
6.
Rout, J., Mishra, M., Tripathy, S.S., Nayak, S.K. and Mohanty, A.K. ( 2001). The Influence of Fiber Treatment on the Performance of Coir/Polyester Composites, Compos. Sci. Technol., 61: 1303.
7.
Mishra, S., Mishra, M., Tripathy, S.S., Nayak, S.K. and Mohanty, A.K. ( 2001). Potentiality of Pineapple Leaf Fibre as Reinforcement in PALF-Polyester Composite: Surface Modification and Mechanical Performance , J. Reinforced Plastics and Composites, 20: 321.
8.
Botev, M., Betchev, H., Bikaris, D. and Panayiotou, C. ( 1999). Mechanical Properties and Viscoelastic Behavior of Basalt Fiber-reinforced Polypropylene, J. Appl. Polym. Sci., 74: 523.
9.
Ray, D., Sarkar, B.K., Das, S. and Rana, A.K. ( 2002). Dynamic Mechanical and Thermal Analysis of Vinylester-Resin-Matrix Composites Reinforced with Untreated and Alkali-Treated Jute Fibers, Compos . Sci. Technol., 62: 911-917.
10.
Ray, D. , Sarkar, B.K., Basak, R.K. and Rana, A.K. (2002). Study of Thermal Behaviour of Alkali-Treated Jute Fibers, J. Appl. Polym. Sci., 85: 2594-2599.
11.
Khan, M.A., Mina, F. and Drzal, L.T. ( 2000). Influence of Silane Coupling Agents of Different Functionalities on the Performance of Jute-Polycarbonate Composites, Third International Conference on Wood and natural Fiber Composites Symposium , pp. 5-1-5-26, Kassel, Germany.
12.
Rong, M.Z., Zhang, M.Q., Liu, Y., Zhang, Z.W., Yang, G.C. and Zeng, H.M. ( 2002). Mechanical Properties of Sisal Reinforced Composite in Response to Water Absorption, Polym. Polym. Comp., 10(6): 407-426.
13.
Pothan, L.A. and Thomas, S. (2003). Polarity Parameters and Dynamic Mechanical Behaviour of Chemically Modified Banana Fiber Reinforced Polyester Composites, Compos. Sci. Technol., 63: 1231-1240.
14.
Herrera-Franco, P.J. and Valadev-Gonzales , A. (2004). Mechanical Properties of Continuous Natural Fiber-Reinforced Polymer Composites , Composites: Part A, 35: 339-345.
15.
Khan, M.A., Rahman, M.M. and Akhunzada, K.S. ( 2002). Grafting of Different Monomers onto Jute Yarn by In Situ UV-Radiation Method: Effect of Additives, Polym. Plast. Technol. Eng., 41(4): 677-689.
16.
Gassan, J. and Gutowski, V.S. ( 2000). Effects of Corona Discharge and UV Treatment on the Properties of Jute-Fiber Epoxy Composites, Compos. Sci. Technol., 60(15): 2857-2863.
17.
George, J., Bhagawan, S.S. and Thomas, S. ( 1998). Improved Interactions in Chemically Modified Pineapple Leaf Fiber Reinforced Polyethylene Composites, Compos. Interf. , 5(3): 201-223.
18.
Pothan, L.A. , George, J. and Thomas, S. (2002). Effect of Fiber Surface Treatment on the Fiber-Matrix Interaction in Banana Fiber Reinforced Polyester Composites, Compos Interf., 9(4): 335-353.
19.
Jones, R.M. ( 1975). Mechanics of Composite Materials, McGraw-Hill, New York.
20.
Nielsen, L.E. and Landel, R.F. (1994). Mechanical Properties of Polymers and Composites, Marcel Dekker Publishers Ltd , New York.
21.
Lai, S.M. , Yeh, F.C., Wang, Y., Chan, H.C. and Shen, H.F. (2003). Comparative Study of Maleated Polyolefins as Compatibilizers for Polyethylene/Wood Flour Composites , J. Appl. Polym. Sci., 87: 487.
22.
Keener, T.J. , Sturt, R.K. and Brown, T.K. (2004). Maleated Coupling Agents for Natural Fibre Composites, Composites: Part A, 35: 357.
23.
George, J., Shreekala, M.S. and Thomas, S. ( 2001). A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites, Polym. Eng. Sci., 41: 1471.
24.
Maiti, S.N. , Subbarao, R. and Ibrahim, M.N. (2004). Effect of Wood Fibers on the Rheological Properties of i-PP/wood Fiber Composites, J. Appl. Polym. Sci., 91: 644.
25.
Hou, C. , Wang, C.G., Ying, L. and Cai, H.-S. (2004). Affect of Dope Additives on Finishing Behavior Of Carbon Fiber, 90: 2752.
26.
Short, D. and Summerscales, J. ( 1979). Hybrids - a Review. Part 1: Techniques Design and Construction , Composites, 10: 215-221.
27.
Short, D. and Summerscales, J. ( 1980). Hybrids- A Review. II- Physical Properties (CFRP-GFRP) Composites, Composites, 11: 33-38.
Kretsis, G. ( 1987). A Review of the Tensile, Compressive, Flexural and Shear Properties of Hybrid Fiber-Reinforced Plastics, Composites , 18: 13-23.
30.
Bunsell, A.R. and Harris, B. (1974). Hybrid Carbon and Glass Fiber Composite, Composites, 5: 157-164.
31.
Whan, C.J., Choi, J.S. and Yoon, Y.S. ( 2002). Electromechanical Behavior of Hybrid Carbon/Glass Fiber Composites with Tension and Bending, J. Appl. Polym. Sci. , 83: 2447.
32.
Belingardi, G. , Cavatorta, M.P. and Frasca, C. (2006). Bending Fatigue Behavior of Glass-carbon/Epoxy Hybrid Composites, Compos. Sci. & Tecnol., 66: 222-232.
33.
Summerscales, J. and Short, D. (1978). Carbon Fibre and Glass Fibre Hybrid Reinforced Plastics, Composites, 9: 157-166.
34.
Shan, Y., Lai, K.-F., Wan K.-T. and Liao, K. ( 2002). Static and Dynamic Fatigue of Glass-carbon Hybrid Composites in Fluid Environment, J. Compos. Materials, 36: 159-172.
35.
Agrawal, D.B. and Broutman, J.L. ( 1990). Analysis and Performance of Fiber Composites, 2nd edn, Wiley, New York.
36.
Stefanidis, S. , Mai, Y.W. and Cotterell , B. (1985). The Specific Work of Fracture of Carbon/Kevlar Hybrid Fiber Composites, J. Materials Sci. Letters, 4: 1033-1035.
37.
Fisher, S. and Marom, G. ( 1987). The Flexural Behavior of Aramid Fiber. Hybrid. Composite. Materials, Compos. Sci. Technol., 28: 291-314.
38.
Aronhime, J. , Harel, H., Gilbert, A. and Marom, G. (1991). The Rate-dependence of Flexural Shear Fatigue and Uniaxial Compression of Carbon- and Aramid-fiber Composites and Hybrids, Compos. Sci. Technol., 43: 105-116.
39.
Lu, S.-H. , Liang, G.-Z., Zhou, Z.-W. and Fang, L. (2006). Structure and Properties of UHMWPE Fiber/ Carbon Fiber Hybrid Composites, J. Appl. Polym. Sci., 101: 1880-1884.
40.
Peijs, A.A.J.M. and Venderbosch R.W. (1991). Hybrid Composites Based on Polyethylene and carbon Fibers Part IV Influence of Hybrid Design on Impact Strength, J. Materials Sci. Letters., 10: 1122-1124.
41.
Jang, J. and Moon, S. ( 1995). Impact Behavior of Carbon Fiber/Ultra-high Modulus Polyethylene Fiber Hybrid Composites, Polym. Compos., 16: 325-329.
42.
Li, Y., Xian, X.J., Choy, C.L., Guo, M. and Zhang, Z. ( 1999). Compressive and Flexural Behavior of Ultra-high-modulus Polyethylene Fiber and Carbon Fiber Hybrid Composites, Compos. Sci. Technol., 59: 13-18.
43.
Park, R. and Jang, J. ( 1998). The Effects of Hybridization on the Mechanical Performance of Aramid/ Polyethylene Intraply Fabric Composites, Compos. Sci. Technol., 58: 1621-1628.
44.
Park, R. and Jang, J. ( 1998). Stacking Sequence Effect of Aramid-UHMPE Hybrid Composites by Flexural Test Method, Polym. Testing, 16: 549-562.
45.
Ward, I.M. and Ladizesky, N.H. ( 1985). Ultra High Modulus Polyethylene Composites, Pure & Appl. Chem., 57: 1641-1649.
46.
Joseph, P.V. , Mathew, G., Joseph, K., Groeninckx, G. and Thomas, S. (2003). Dynamic Mechanical Properties of Short Sisal Fiber Reinforced Polypropylene Composites, Composites. Part A, Applied science and Manufacturing, 34: 275-290.
47.
Jhon, K. and Naidu, S.V. (( 2004). Sisal/Glass Fiber Hybrid Composites: The Impact and Compressive Properties, J. Reinf. Plst. & Composit., 23: 1253.
48.
Panthapulakkal, S. and Sain, M. (2007). Studies on the Water Absorption Behavior of short Hemp-Glass Fiber hybrid Polypropylene Composites , J. Compos. Materials, 41: 1871-1883.
49.
Kalaprasad, G., Joseph, K. and Thomas, S. (1997). Influence of Short Glass Fiber Addition on the Mechanical Properties of Banana Reinforced Low Density Polyethylene Composites, J. Comp. Matter, 31: 509-526.
50.
Kalaprasad, G., Thomas, S., Pavithran, C., Neelakantan, N.R. and Balakrishna , S. (1996). Hybrid Effect in the Mechanical Properties of Short Banana/Glass Hybrid Fiber Reinforced Low Density Polyethylene Composites, J. Reinf. Plast. Compo., 15: 48-73.
Ibarra L. and Panos D. ( 1998). Dynamic Properties of Thermoplastic Butadiene-styrene (SBS) and Oxidized Short Carbon Fiber Composite Materials, J. Appl. Polym. Sci., 67: 1819.
53.
Kodama, M., Karino, I. and Kobayashi, J. ( 1986). Interaction Between the Reinforcement and Matrix in Carbon-fiber-reinforced Composite: Effect of Forming the Thin Layer of Polyimide Resin on Carbon Fiber by in situ Polymerization, J. Appl. Polym. Sci., 32: 5057.
54.
Kubat, J., Rigdahl, M. and Welander, M. ( 1990). Characterization of Interfacial Interactions in High Density Polyethylene Filled with Glass Spheres using Dynamic-mechanical Analysis , J. Appl. Polym. Sci., 39: 1527.
55.
Ko, Y.S., Forsman, W.C. and Dziemianowicz, T.S. ( 1982). Carbon Fiber-reinforced Composites: Effect of Fiber Surface on Polymer Properties, Polym. Eng. Sci., 22: 805.
56.
Dong, S. and Gauvin, R. ( 1993). Application of Dynamic Mechanical Analysis for the Study of the Interfacial Region in Carbon Fiber/Epoxy Composite Materials, Polym . Compos., 14: 414.
57.
McCrum, N.G., Read, B.E. and Willians, G. ( 1967). Anelastic and Dielectric Effects in Polymeric Solids, Dover, New York.
58.
Kuruvilla, J. , Thomas, S. and Pavithran, C. (1993). Dynamic Mechanicanical Properties of Short Sisal Fiber Reinforced Low-density Polyethylene Composites , J. Reinfor. Plasts. Compos., 12: 139-155.
