Permeability of Hybrid Reinforcements and Mechanical Properties of their Composites Molded by Resin Transfer Molding

Abstract

The aim of this study was to carry out RTM experiments to determine in-plane permeability of glass mats, non-woven polypropylene flow media (PP) and hybrids (glass + PP), with different stacking sequences, and to compare these with various sisal mats and hybrids (glass + sisal). RTM composites were also molded. Permeability decreased for higher fiber content and, for the same fiber volume content, the permeability of the sisal mats was much higher than that of glass mats and also higher than that of the PP non-woven core, often used as an infiltration medium. Besides, a tendency of increasing permeability with sisal fiber length (up to 30 mm) was noticed. The use of the sisal mat as a flow medium increased the permeability of the hybrid reinforcement and slightly improved the mechanical properties of the composite. Hence, the sisal mat may be indicated in engineering applications as a substitute for commercial flow media, widely used in the process called RTM light.

Keywords

resin transfer molding (RTM)permeability hybrid composites vegetable fibers.

References

Pearce, N.R.L. , Summerscales, J. and Guild, F.J. (2000). Improving the Resin Transfer Molding Process for Fabric-reinforced Composites by Modification of the Fabric Architecture, Compos. Part A - Appl. S, 31(12): 1433-1441.

Lee, G.W. , Lee, N.J. , Jang, J. , Lee, K.J. and Nam, J.D. (2002). Effects of Surface Modification on the Resin-transfer Molding (RTM) of Glass- fiber /Unsaturated-Polyester Composites, Compos. Sci. Technol., 62(1): 9-16.

Amico, S.C. and Lekakou, C. ( 2001). An Experimental Study of the Permeability and Capillary Pressure in Resin-transfer Molding, Compos. Sci. Technol. , 61(13): 1945-59.

Minaie, B. , Chen, Y.F. and Mescher, A.M. ( 2002). A Methodology to Obtain a Desired Filling Pattern During Resin Transfer Molding, J. Compos. Mater., 36(14): 1677-1692.

Liu, Q. , Parnas, R.S. and Giffard, H.S. ( 2007). New Set-up for In-plane Permeability Measurement, Compos . Part A - Appl. S, 38(3): 954-962.

Chen, Z. , Ye, L. and Liu, H. ( 2004). Effective Permeabilities of Multilayer Fabric Preforms in Liquid Composite Molding, Compos. Struct., 66(1-4): 351-357.

Heider, D. , Simacek, P. , Dominauskas, A. , Deffor, H. , Advani, S. and Gillespie Jr, J.W. ( 2007). Infusion Design Methodology for Thick-section, Low-permeability Preforms using Inter-laminar Flow Media, Compos. Part A - Appl. S, 38(2): 525-534.

Li, Y. , Mai, Y.W. and Ye, L. ( 2000). Sisal fiber and its Composites: A Review of Recent Developments, Compos. Sci. Technol., 60(11): 2037-2055.

John, K. and Naidu, S.V. ( 2004). Effect of Fiber Content and Fiber Treatment on Flexural Properties of Sisal Fiber/Glass Fiber Hybrid Composites, J. Reinf. Plast. Comp., 23(15): 1601-1605.

10.

Idicula, M. , Neelakantan, N.R. , Oommen, Z. , Joseph, K. and Thomas, S. (2005). A Study of the Mechanical Properties of Randomly Oriented Short Banana and Sisal Hybrid Fiber Reinforced Polyester Composites, J. Appl. Polym. Sci., 96(5): 1699-1709.

11.

Ahmed, K.S. , Vijayarangan, S. and Rajput, C. (2006). Mechanical Behavior of Isothalic Polyester-based Untreated Woven Jute and Glass Fabric Hybrid Composites , J. Reinf. Plast. Comp., 25(15): 1549-1569.

12.

Sreekumar, P.A. , Joseph, K. , Unnikrishnan, G. and Thomas, S. (2007). A Comparative Study on Mechanical Properties of Sisal-leaf fibers-reinforced Polyester Composites Prepared by Resin Transfer and Compression Molding Techniques, Compos. Sci. and Technol., 67(3-4): 453-461.

13.

Aquino, E.M.F. , Sarmento, L.P.S. , Oliveira, W. and Silva, R.V. (2007). Moisture Effect on Degradation of Jute/Glass Hybrid Composites, J. Reinf. Plast. Comp., 26(2): 219-233.

14.

Mwaikambo, L.Y. and Ansell, M.P. (2006). Mechanical Properties of Alkali Treated Plant Fibers and their Potential as Reinforcement Materials , I. I. Sisal fibers, J. Mater. Sci., 41(8): 2497-2508.

15.

Rodriguez, E. , Giacomelli, F. and Vazquez, A. (2004). Permeability-porosity Relationship in RTM for Different Fiberglass and Natural Reinforcements, J Compos. Mater, 38(3): 259-268.

16.

Senoguz, M.T. , Dungan, F.D. , Sastry, A.M. and Klamo, J.T. (2001). Simulations and Experiments on Low-pressure Permeation of Fabrics: Part II - The Variable Gap Model and Prediction of Permeability, J. Compos. Mater., 35(14): 1285-1322.

17.

Amico, S.C. , Sydenstricker, T.H.D. and da Silva , P.S.C.P. (2005). Evaluation of the Influence of Chemical Treatment on the Tensile Strength of Sisal Fibers by a Weibull Distribution Analysis, Metals. Mater. Proc., 17(3-4): 233-242.

18.

Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibers, Prog. Polym. Sci., 24(2): 221-274.

19.

Perrot, Y. , Baley, C. , Grohens, Y. and Davies, P. ( 2007). Damage Resistance of Composites Based on Glass Fiber Reinforced Low Styrene Emission Resins for Marine Applications, Appl. Compos. Mater., 14(1): 67-87.

20.

Khalil, H.P.S.A. , Hanida, S. , Kang, C.W. and Fuaa, N.A.N. (2007). Agro-hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/Glass Hybrid Reinforced Polyester Composites, J. Reinf. Plast. Comp. , 26(2): 203-218.

21.

Hill, C.A.S. and Khalil, H.P.S.A. (2000). Effect of Fiber Treatments on Mechanical Properties of Coir or Oil Palm Fiber Reinforced Polyester Composites, J. Appl. Polym. Sci., 78(9): 1685-1697.