Abstract
At the request of the Editor-in-Chief and Sage, the following article has been retracted -
Akhoundi B. An evaluation of the shape-memory behavior and mechanical properties of polylactic acid/Ni80Cr20 continuous wire composite produced by extrusion-based additive manufacturing and in-melt simultaneous impregnation method. Journal of Reinforced Plastics and Composites. 2023;43(13-14):783-797. doi:10.1177/07316844231197036
The author’s institution conducted an investigation and recommended that the article is retracted as it contains unattributed overlap with material from the following:
Masoumeh Ghaemi Sarcheshmeh, Additive Manufacture of Shape Memory Polymer Composites with Continuous Fiber as both Reinforcement and Stimulant, submitted to the Department of Engineering, Tarbiat Modares University, January 2023.
Due to the inappropriate attribution to prior research, the Editor-in-Chief retracts this article.
The author did not agree to this notice.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
