HRP-Loaded Bioresorbable Microspheres: Effect of Copolymer Composition and Molecular Weight on Microstructure and Release Profile

Abstract

Poly(DL-lactic-co-glycolic acid) microspheres are prepared using a double-emulsion technique and are loaded with the model enzyme horseradish peroxidase (HRP). These microspheres can be used alone or as coatings for bioresorbable fibers that may be used as scaffolds for tissue regeneration applications. The present study focuses on the effect of the copolymer's composition and initial molecular weight on the microsphere structure, encapsulation efficiency, and cumulative protein release for 12 weeks. The release profiles generally exhibits an initial burst effect accompanied by slow release over an extended period of time, during which diffusion rather than degradation controlled HRP release from these structures. An increase in the initial molecular weight or in the copolymer's lactic acid content results in larger microspheres with smoother surfaces, and a decrease in the burst release and in the total HRP release. Molecular weight is found to have a stronger effect than copolymer composition. We demonstrate that it is possible to obtain versatile release profiles, which can be tailored for specific applications by choosing the right initial molecular weight and copolymer composition.

Keywords

poly(DL-lactic-co-glycolic acid)microspheres controlled protein release horseradish peroxidase multi-reservoir systems.

References

Langer, R. (1990). New Methods of Drug Delivery, Science, 249: 1527—1533.

Babensee, J.E. , McIntire, L.V. and Mikos, A.G. (2000). Growth Factor Delivery for Tissue Engineering, Pharmaceutical Research, 17(5): 497—504.

Reddi, A.H. (1998). Role of Morphogenetic Proteins in Skeletal Tissue Engineering and Regeneration, Nat. Biotechnology, 16(3): 247—252.

Lee, H. , Cusick, R.A. , Browne, F. , Kim, T.H. , Ma, P.X. , Utsunomia, H. , Langer, R. and Vacanti, J.P. (2002). Local Delivery of Basic Fibroblast Growth Factor Increases Both Angiogenesis and Engraftment of Hepatocytes in Tissue-engineered Polymer Devices, Transplantation, 73: 1589—1593.

Wei, G. , Pettway, G.J. , McCauley, L.K. and Ma, P.X. (2004). The Release Profiles and Bioactivity of Parathyroid Hormone from Poly(lactic-co-glycolic acid) Microspheres, Biomaterials, 25: 345—352.

Ogawa, Y. , Yamamoto, H. , Okada, H. , Yashiki, T. and Shimamoto, T.A. (1998). New Technique to Efficiently Entrap Leuprolide Acetate into Microcapsules of Polylactic Acid or Copoly(lactide/glycolic)acid , Chemical Pharmaceutical Bulletin, 5: 1095—1103.

Cleland, J.L. , Johnson, O.L. , Putney , S. and Jones, A.J.S. (1997). Recombinant Human Growth Hormone Poly (lactide-co-glycolic acid) Microsphere Formulation Development , Advanced Drug Delivery Research , 28: 71—84.

Cui, F. , Cun, D. , Tao, A. , Yang, M. , Shi, K. , Zhao, M. and Guan, Y. (2005). Preparation and Characterization of Mellitin-loaded Poly(DL-lactic acid) or Poly (DL-lactic-co-glycolic acid) Microspheres Made by the Double Emulsion Method, Journal of Controlled Release , 107: 310—319.

Sinha, V.R. and Trehan, A. (2003). Biodegradable Microspheres for Protein Delivery , Journal of Controlled Release, 90: 261—280.

10.

Nihant, N. , Schugens, C. , Grandfils, C. , Jerom, R. and Teyssie, P. (1994). Polylactide Microparticles Prepared by Double Emulsion/Evaporation Technique. I. Effect of Primary Emulsion Stability, Pharmaceutical Research, 11(10): 1479—1484.

11.

Yang, Y.Y. , Chung, T.S. , Bai, X.L. and Chan, W.K. (2000). Effect of Preparation Conditions on Morphology and Release Profiles of Biodegradable Polymeric Microspheres Containing Protein Fabricated by Double Emulsion Method, Chemical Engineering Science, 55: 2223—2236.

12.

Yang, Y.Y. , Chung, T.S. and Ng, N.P. (2001). Morphology, Drug Distribution and In Vitro Release Profiles of Biodegradable Polymeric Microspheres Containing Protein Fabricated by Double Emulsion Solvent Extraction/ Evaporation method, Biomaterials, 22: 231—241.

13.

Zhu, K.J. , Jiang, H.L. , Du , X.Y. , Wang, J. , Xu , W.X. and Liu , S.F. (2001). Preparation and Characterization of hCG-loaded Polylactide or Poly(lactide-co-glycolide) Microspheres Using a Modified Water-in-oil-in-water (W/O/W) Emulsion Solvent Evaporation Technique , Journal of Microencapsulation, 18(2): 247—260.

14.

Jeffery, H. , Davis, S.S. and O'Hagan , D.T. (1993). The Preparation and Characterization of Poly(lactide-co-glycolide) Microparticles. II. The Entrapment of a Model Protein Using a (water-in-oil)-in-water Emulsion Solvent Evaporation Technique, Pharmaceutical Research, 10(3): 362—368.

15.

Boury, F. , Merchais, H. , Proust, J.E. and Benoit, J.P. (1997). Bovine Serum Albumin Release from Poly(a-hydroxy acid) Microspheres: Effect of Polymer Molecular Weight and Surface Properties , Journal of Controlled Release, 45: 75—86.

16.

Dong, C.M. , Guo, Y.Z. , Qiu, K.Y. , Gu, Z.W. and Feng, X.D. (2005). In-vitro Degradation and Controlled Release Behavior of D,L-PLGA50 and PCL-b-D,L-PLGA 50 Copolymer Microspheres, Journal of Controlled Release, 107: 53—64.

17.

Zhang, J.X. , Chen, D. , Wang , S.J. and Zhu , K.J. (2005). Optimizing Double Emulsion Process to Decrease the Burst Release of Protein from Bioresorbable Polymer Microspheres, Journal of Microencapsulation , 22(4): 413—422.

18.

Cleland, J.L. et al. (1997). Recombinant Human Growth Hormone Poly(lactic-co-glycolic acid) Microspheres Provide a Long Lasting Effect, Journal of Controlled Release, 49: 193—205.

19.

Zhu, K.J. , Jiang, H.L. , Du , A.X. , Wang, J. , Xu , W.X. and Liu , S.F. (2001). Preparation and Characterization of hCG-loaded Polylactide or Poly(lactide-co-glycolide) Microspheres using a Modified Water-in-oil-in Water (w/o/w) Emulsion Solvent Evaporation Technique , Microencapsulation, 18(2): 247—260.

20.

Zilberman, M. and Shraga, I. (2006). Microsphere-based Bioresorbable Structures Loaded with Proteins for Tissue Regeneration Applications , Journal of Biomedical Materials Research — Part A , 79A: 370—379.

21.

Shraga, I. (2005). Microsphere-Based Bioresorbable Structures Loaded with Proteins for Tissue Regeneration Applications, MSc Thesis, Tel-Aviv University.

22.

Castellanos, I.J. , Crespo, R. and Griebenow, K. (2003). Poly(ethylene glycol) as Stabilizer and Emulsifying Agent: A Novel Stabilization Approach Preventing Aggregation and Inactivation of Proteins upon Encapsulation in Bioerodible Polyester Microspheres, Journal of Controlled Release, 88: 135—145.

23.

Sandor, M. , Enscore, D. , Weston, P. and Mathiowitz, E. (2001). Effect of Protein Molecular Weight on Release from Micron-Sized PLGA Microspheres, Journal of Controlled Release, 76: 297—311.

24.

Kempen, D.H.R. , Lu, L. , Zhu , X. , Kim , C. , Jabbari, E. , Dhert, W.J.A. , Currier, B.L. and Yaszemski , M.J. (2004). Development of Biodegradable Poly(propylene furmarate)/Poly(lactic-co-glycolic acid) Blend Microspheres. II. Controlled Drug Release and Microsphere Degradation, Journal of Biomedical Materials Research, 70A: 293—302.

25.

Fu, K. , Harrell, R. , Zinski, K. , Um, C. , Jaklenec, A. , Frazier, J. , Lotan, N. , Burke, P. , Klibanov, A.M. and Langer, R. (2003). A Potential Approach for Decreasing the Burst Effect of Protein from PLGA Microspheres, Journal of Pharmaceutical Science, 92(8): 1582—1591.