A genetic algorithm-based fixture locating positions and clamping schemes optimization

Abstract

Optimizing the locator positions and clamping schemes of a fixture was proven to improve the dimensional and form accuracy of a workpiece significantly. A number of approaches have been developed to optimize the designs of sheet-metal assembly fixtures and machining fixtures. However, in these previous works, the optimal selection of the positions of locators and clamps were based on a stationary set of locator and clamp conditions; i.e. the numbers of the locators and clamps were fixed during optimization. This paper proposes a genetic algorithm (GA)-based optimization method to select automatically the optimal numbers of locators and clamps as well as their optimal positions in sheet-metal assembly fixtures, such that the workpiece deformation due to the gravity effect and resulting variation due to part dimensional variation are simultaneously minimized. The application result of a real industrial part demonstrated that the proposed algorithm effectively achieves the objective.

Keywords

fixture locating scheme genetic algorithm optimization sheet-metal assembly

References

Trappey

A. J.

Liu

C. R.

A literature survey of fixture design automation. Int. J. Advd Mfg Technol., 1990, 5, 240–255.

Hoffman

E. G.

Jig and Fixture Design, 4th edition, 1996 (Delmar Publishers).

Cai

S. J.

Yuan

J. X.

Deformable sheet metal fixturing: Principles, algorithms, and simulations. Trans. ASME, J. Mfg Sci. and Engng, 1996, 118, 318–324.

Shiu

B. W.

Principle and simulation of fixture configuration design for sheet metal assembly with laser welding, part 2: Optimal configuration design with the genetic algorithm, Int. J. Advd Mfg Technol., 2001, 18, 276–284.

Hsieh

C. C.

K. P.

Simulation and optimization of assembly processes involving flexible parts. Int. J. Veh. Des., 1997, 18(5), 455–465.

Menassa

DeVries

Optimization methods applied to selecting support positions in fixture design. Trans. ASME, J. Engng for Industry, 1991, 113, 412–417.

Liao

S. J.

Flexible multibody dynamics based fixture-workpiece analysis model for fixturing stability. Int. J. Mach. Tools Mf., 2000, 40, 343–362.

Liao

S. J.

An integrated model of fixture-workpiece system for surface quality prediction. Int. J. Advd Mfg Technol., 2001, 17(11), 810–818.

N. H.

Chan

K. C.

A genetic algorithm based approach to optimal fixture configuration. Computers and Industry Engng, 1996, 31(3/4), 919–924.

10.

Krishnakumar

Melkote

S. N.

Machining fixture layout optimization using the genetic algorithm. Int. J. Mach. Tools Mf., 2000, 40, 579–598.

11.

Melkote

S. N.

Optimal fixture design accounting for the effect of workpiece dynamics. Int. J. Advd Mfg Technol., 2001, 18, 701–707.

12.

Vallapuzha

DeMeter

E. C.

Choudhuri

Khetan

R. P.

An investigation of the effectiveness of the fixture layout optimization method. Int. J. Mach. Tools Mf., 2002, 42, 251–263.

13.

Vallapuzha

DeMeter

E. C.

Choudhuri

Khetan

R. P.

An investigation in to the use of spatial coordinates for the genetic algorithm based solution of the fixture layout optimization problem. Int. J. Mach. Tools Mf., 2002, 42, 265–275.

14.

Kumar

A. S.

Subramaniam

Seow

K. C.

Conceptual design of fixture using genetic algorithms. Int. J. Advd Mfg Technol., 1999, 15, 79–84.

15.

Cecil

A clamping design approach for automated fixture design. Int. J. Advd Mfg Technol., 2001, 18, 784–789.

16.

Cecil

Computer-aided fixture design—a review and future trends. Int. J. Advd Mfg Technol., 2001, 18, 790–793.

17.

Msc/Nastran User's Manual, 1998 (MacNeal-Schwendler Corp.).

18.

Haupt

R. L.

Haupt

S. E.

Practical Genetic Algorithms, 1998 (John Wiley, New York).