An evaluation of the TI 2 manufacturing system for the machining of airframe subassemblies

Abstract

The commercial aircraft manufacturing industry is continually seeking new techniques for the automation of manufacturing and assembly tasks in the construction of aero-structures. The application of automation is limited by the size and compliance of the structures, the low manufacturing volumes and the inherent dimensional variability between assemblies. New automated systems based on the use of advanced control systems and non-contact metrology are now beginning to overcome some of these problems and the use of automation is becoming more viable. The TI² system is one such system and this paper presents the results obtained from its application to the machining of a representative airframe subassembly. Real results are presented along with a discussion of some of the problems that may be encountered when using such a system.

Keywords

aerospace manufacturing photogrammetry machining

References

Webb

The application of mechatronic systems within aero-structure assembly—drivers and barriers. In Mechatronics 2002, Twente, Holland, 2002.

Webb

Eastwood

Gindy

An automated approach to aircraft manufacture. In Mechatronics 2000, Atlanta, Georgia, 2000.

Golden

H. D.

1CAM robotics system for aerospace batch manufacturing—Task A. Materials Laboratory, Air Force Wright Aeronautical Laboratories, Ohio, 1980.

Robot-based machine tool for the aerospace industry. Ind. Robot, 1993, 20(3), 11–13.

ONCE (ONe-sided Cell End-effector) , www.electroimpact.com/kuka.htm.

TI² gives the robot eyes, decision-making capacity. Tricept Times, 1999, 1, 8.

Eastwood

S. J.

Webb

McKeown

The use of the TI² system on a double-curvature aerospace panel. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2003, 217(B6), 849–855.

Marguet

Ribere

Measurement-assisted assembly applications on Airbus final assembly lines. In Proceedings of ACE 2003, Montreal, Canada, 2003.

Eastwood

Webb

McKeown

Practical evaluation of the TI² manufacturing system for the aerospace industry. In Flexible Automation and Intelligent Manufacturing (FAIM), 2001 (DCU, Dublin, Eire).