Taking the sinking winch mechanism as prototype, this paper studies the forward kinematics problem of a four-cable-driven under-constrained parallel mechanism. The tension states (slackness and tautness) and properties of the cables are incorporated into the forward kinematics model. We propose a new algorithm (named traversal algorithm) to solve the tensions in cables and the pose of platform, under the condition that only the lengths of four cables are known. The simulation and experimental results on forward kinematics demonstrate the effectiveness and correctness of the model and the traversal algorithm. The results of this paper can be used to evaluate the effect of the unequal cables’ lengths to the tension distribution of cables and pose of the platform for sinking winch mechanism.
BehzadipourSKhajepourACable-based robot manipulators with translational degrees of freedom. In: CuberoS (eds). Industrial robotics: theory, modeling and control, Austria: ARS, 2006, pp. 211–236.
2.
Gao BT, Zhao JG, Xi N, et al. Combined kinematic and static analysis of a cable-driven manipulator with a spring spine. In: IEEE international conference on robotics and automation, Shanghai, China, 9–13 May 2011, pp. 2725–2730.
3.
Yang GL, Yeo SH and Pham CB. Kinematics and singularity analysis of a planar cable-driven parallel manipulator. In: Proceeding of 2004 IEEE/RSJ international conference on intelligent robots and systems, Sendal, Japan, 28 September–2 October 2004, pp. 3835–3840.
Zheng YQ, Lin Q, Wu J, et al. Analysis of inverse kinematics and dynamics of a novel 6-degree-of-freedom wire-driven parallel gantry crane robot. In: IEEE/ASME international conference on advanced intelligent mechatronics, Singapore, 14–17 July 2009, pp. 1786–1791.
6.
ZhengYQLinQLiuX. Kinematic calibration of a wire-driven parallel support system in wind tunnels. China Mech Eng2006; 17: 551–554.
7.
KozakKZhouQWangJS. Static analysis of cable-driven manipulators with non-negligible cable mass. IEEE T Robot2006; 22: 425–433.
8.
JeongJWKimSHKwakYK. Kinematics and workspace analysis of a parallel wire mechanism for measuring a robot pose. Mech Mach Theory1999; 34: 825–841.
9.
Nunes WM, Rodrigues LAO, Oliveira LP, et al. Cable-based parallel manipulator for rehabilitation of shoulder and elbow movements. In: 2011 IEEE international conference on rehabilitation robotics, ETH Zurich Science City, Switzerland, 29 June–1 July 2011, pp. 1–6.
Ottaviano E, Ceccarelli M and De Ciantis M. A 4-4 cable-based parallel manipulator for an application in hospital environment. In: 2007 mediterranean conference on control and automation, Athens, Greece, 27–29 July 2007, pp. 1–6.
12.
Carricato M and Merlet JP. Direct geometrico-static problem of under-constrained cable-driven parallel robots with three cables. In: 2011 IEEE international conference on robotics and automation, Shanghai, China, 9–13 May 2011, pp. 3011–3017.
13.
OttavianoE. Analysis and design of a four-cable-driven parallel manipulator for planar and spatial tasks. Proc IMechE, Part C: J Mechanical Engineering Science2008; 222: 1583–1592.
14.
HillerMFangSMielczarekS. Design, analysis and realization of tendon-based parallel manipulators. Mech Mach Theory2005; 40: 429–445.
15.
GhasemiAEghtesadMFaridM. Neural network solution for forward kinematics problem of cable robots. J Intell Robot Syst2010; 60: 201–215.
16.
LeeTYShimJK. Forward kinematics of the general 6-6 stewart platform using algebraic elimination. Mech Mach Theory2001; 36: 1073–1085.
17.
SommeseAJVerscheldeJ. Advances in polynomial continuation for solving problems in kinematics. J Mech Des2004; 126: 262–268.
18.
GanDLiaoQDaiJS. Forward displacement analysis of the general 6-6 Stewart mechanism using Gröbner bases. Mech Mach Theory2009; 44: 1640–1647.
19.
MerletJP. Solving the forward kinematics of a gough-type parallel manipulator with interval analysis. Int J Robot Res2004; 23: 221–235.
20.
Dehghani M, Ahmadi M., Khayatian A, et al. Neural network solution for forward kinematics problem of hexa parallel robot. In: Proceedings of the American control conference, Seattle, Washington, USA, 11–13 June 2008, pp. 4214–4219.
21.
WangXHaoMChengY. On the use of differential evolution for forward kinematics of parallel manipulators. Appl Math Comput2008; 205: 760–769.
22.
Chandra R, Frean M and Rolland L. Ameta-heuristic paradigm for solving the forward kinematics of 6-6 general parallel manipulator. In: IEEE international symposium on computational intelligence in robotics and automation, Daejeon, South Korea, 15–18 December 2009, pp. 171–176.
23.
Luo Y and Liu Q. Chaotic finding method of position forward kinematics of 3-dof parallel robot. In: Third international symposium on intelligent information technology application, Nanchang, China, 21–22 November 2009, pp. 44–47.
24.
Merlet JP and Daney D. Kinematic analysis of a spatial four-wire driven parallel crane without constraining mechanism. In: Proceedings of the 5th international workshop on computational kinematics, Duisburg, German, 6–8 May 2009, pp. 1–8.
25.
Jiang Q and Kumar V. The direct kinematics of objects suspended from cables. In: Proceeding of the ASME 2010 international design engineering technical conferences, Montreal, Canada, 15–18 August 2010, pp. 1–10.
26.
Carricato M and Merlet JP. Geometrico-static analysis of under constrained cable-driven parallel robots. In: Lenarčič J and Stanišić MM (eds) Advances in robot kinematics: motion in man and machine, Springer, Dordrecht, 2010, pp. 309–319.
27.
AbbasnejadGCarricatoM. Real solutions of the direct geometricao-static problem of under-constrained cable-driven parallel robots with 3 cables: a numerical investigation. Meccanica2012; 47: 1761–1773.
28.
CarricatoMMerletJP. Stability analysis of under-constrained cable-driven parallel robots. IEEE T Robot2013; 29: 288–296.
29.
Shao XG, Zhu ZC, Cao GH, et al. Forward kinematics analysis of a four-cable-driven parallel robot. In: 2011 international conference on chemical, mechanical and materials engineering, Guangzhou, China, 8–10 July 2011, pp. 13–18.
30.
IrvineH. Cable structures, Cambridge, MA: MIT Press, 1981.
31.
Riehl N, Gouttefarde M, Krut S, et al. Effects of non-negligible cable mass on the static behavior of large workspace cable-driven parallel mechanisms. In: 2009 IEEE international conference on robotics and automation, Kobe, Japan, 12–17 May 2009, pp. 2193–2198.
32.
PowellMAFortran subroutine for solving systems of nonlinear algebraic equations. In: Rabinowitz P (eds). Numerical methods for nonlinear algebraic equations, Gordon and Breach Science Publishers, 1970, pp. 115–161.
33.
RumpS. Developments in reliable computing, Kluwer Academic Publishers, 1999, pp. 77–105.
34.
HansenEWalsterGW. Global optimization using interval analysis, CRC Press, 2004, pp. 237–282.
