Damage detection in grouted connections using electromechanical impedance spectroscopy

Abstract

Grouted connections are structural joints formed by a cementitious grout cast between two concentric circular tubes. They are widely used in the offshore construction of oil and gas platforms, and for offshore wind turbines (monopiles and jackets). However, their application in offshore wind turbine installations can be critical due to the high bending moments coming from wind loading. Recently, it was found that grouted connections show limited performance in offshore wind turbine installations leading to settlements between the steel tubes and steel/grout debonding. Hence, structural health monitoring techniques for grouted connections are needed that ensure a safe and reliable operation of offshore wind turbines. This short communication describes the successful application of electromechanical impedance spectroscopy for damage detection in grouted connections.

Keywords

Damage detection grouted connections electromechanical impedance spectroscopy

Get full access to this article

View all access options for this article.

References

Tziavos

Hemida

Metje

et al.

Grouted connections on offshore wind turbines: a review. Proc Inst Civil Eng – Engng Comput Mech 2016; 169: 183–195.

Lotsberg

Serednicki

Lervik

et al.

Design of grouted connections for monopile offshore structures: results from two joint industry projects. Stahlbau 2012; 81: 695–704.

Dallyn

El-Hamalawi

Palmeri

et al.

Experimental investigation on the development of wear in grouted connections for offshore wind turbine generators. Eng Struct 2016; 113: 89–102.

Wang

Han

L-H

. Behaviour of grout-filled double skin steel tubes under compression and bending: experiments. Thin Wall Struct 2017; 116: 307–319.

Schaumann

Raba

Bechtel

. Fatigue behaviour of grouted connections at different ambient conditions and loading scenarios. Energy Proc 2017; 137: 196–203.

Gupta S, Stoddart E, Sanderson D, et al. Condition monitoring of offshore wind turbines with scour and grout damage in monopile foundations. In: SECED conference: earthquake risk and engineering towards a resilient world, Cambridge, UK 2015, pp.1–10.

Häckell M, Friedmann H and Feulner M. Detecting damage in grouted-joints of wind turbine support structures – application to a large-scale experiment. In: 11th international workshop on structural health monitoring, Stanford, USA, 2017, pp.2467–2474. DEStech Publications, Inc.

Liang

Sun

Rogers

. Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer. J Intell Mater Syst Struct 1997; 8: 335–343.

Annamdas

Radhika

. Electromechanical impedance of piezoelectric transducers for monitoring metallic and non-metallic structures: a review of wired, wireless and energy-harvesting methods. J Intell Mater Syst Struct 2013; 24: 1021–1042.

10.

Wandowski

Malinowski

Ostachowicz

. Temperature and damage influence on electromechanical impedance method used for carbon fibre–reinforced polymer panels. J Intell Mater Syst Struct 2017; 28: 782–798.

11.

Wandowski

Malinowski

Skarbek

et al.

Moisture detection in carbon fiber reinforced polymer composites using electromechanical impedance technique. Proc IMechE, Part C: J Mechanical Engineering Science 2016; 230: 331–336.

12.

Liu

Wang

Chen

et al.

Concrete damage diagnosis using electromechanical impedance technique. Construct Build Mater 2017; 136: 450–455.

13.

Sabet Divsholi

Yang

. Combined embedded and surface-bonded piezoelectric transducers for monitoring of concrete structures. NDT & E Int 2014; 65: 28–34.

14.

Lim

Soh

. A novel electromechanical impedance–based model for strength development monitoring of cementitious materials. Struct Health Monitor 2017, http://journals.sagepub.com/doi/abs/10.1177/1475921717725028.

15.

Neuschwander K, Shrestha A, Moll J, et al. Multichannel device for integrated pitch catch and EMI measurements in guided wave structural health monitoring applications. In: 11th international workshop on structural health monitoring, Stanford, USA, 2017, pp.1723–1730. DEStech Publications, Inc.

16.

Neuschwander

Moll

Memmolo

et al.

Simultaneous load and structural monitoring of a carbon fiber rudder stock: results from a quasi-static tensile test. Marine Struct 2018. (under review).