This paper introduces a novel three degree-of-freedom spherical parallel manipulator with 3-PRR topology, where P and R denote a curved prismatic joint and a revolute joint, respectively. The first revolute joint of each PRR leg is actuated via a double Rzeppa-type driveshaft, and hence underlined. The manipulator has at most eight working modes and eight assembly modes. However, only one working mode and one assembly mode of the manipulator are acceptable during its motion which can be easily identified. Singularity and kinematic dexterity analyses reveal that the proposed 3-PRR spherical parallel manipulator has no forward kinematic singularity for a wide range of rotation of the moving platform around its central axis. An optimal design of the manipulator is also presented having a workspace with good kinematic dexterity.
Gough VE and Whitehall SG. Universal tire testing machine. In: Proceedings of the international technical congress FISITA, Institution of Mechanical Engineers, London, 1961, p. 117.
3.
StewartD. A platform with six degrees of freedom. Proc IMechE1965; 180: 371–386.
4.
ZarkandiS. Kinematic analysis and workspace optimization of a novel 4RPSP + PS parallel manipulator. Mech Based Des Struct Mach 2020. DOI: 10.1080/15397734.2020.1725564.
5.
Pierrot F, Reynaud C and Fournier A. DELTA: A simple and efficient parallel robot, Robotica 1990; 8(2): 105–109.
6.
ArataJHajimeKMotokiT, et al.Surgical bedside master console for neurosurgical robotic system. Int J Comp Assist Radiol Surg2012; 8: 75–86.
7.
BirglenLGosselinCMPouliotN, et al.Shade, a new 3-DOF haptic device. IEEE Trans Robot Automation2002; 18: 166–175.
8.
GosselinCMPerreaultLVaillancourtCh. Simulation and computer-aided kinematic design of three-degree-of-freedom spherical parallel manipulators. J Robot Syst1995; 12: 857–869.
9.
BaiSHansenMRAngelesJ. A robust forward-displacement analysis of spherical parallel robots. Mech Mach Theory2009; 44: 2204–2216.
10.
TaoZAnQ. Interference analysis and workspace optimization of 3-RRR spherical parallel mechanism. Mech Mach Theory2013; 69: 62–72.
11.
WuG. Multiobjective optimum design of a 3-RRR spherical parallel manipulator with kinematic and dynamic dexterities. Model Identific Control2012; 33: 111–122.
12.
Mohammadi Daniali HR, Zsombor-Murray PJ and Angeles J. The kinematics of 3-dof planar and spherical double-triangular parallel manipulators. In: Angeles J, Hommel G and Kovacs P (eds) Computational kinematics. Dordrecht: Kluwer Academic Publishers, 1993, pp.153–164.
13.
EnferadiJTootoonchiA. A novel spherical parallel manipulator: forward position problem, singularity analysis and isotropy design. Robotica2009; 27: 663–676.
14.
InnocentiCParenti-CastelliC. Echelon form solution of direct kinematics for the general fully-parallel spherical wrist. Mech Mach Theory1993; 28: 553–561.
15.
WohlhartK. Displacement analysis of the general spherical Stewart platform. Mech Mach Theory1994; 29: 581–589.
16.
VertechyRParenti-CastelliV. Real-time direct position analysis of parallel spherical wrists by using extra sensors. J Mech Des2006; 128: 288–294.
17.
Karouia M and Hervé JM. A three-DOF tripod for generating spherical rotation. In: Lenarcic J and Stanisic MM (eds) Advances in robot kinematics. Amsterdam: Kluwer, 2000, pp.395–402.
18.
Karouia M and Hervé JM. A Family of Novel Orientational 3-DOF Parallel Robots. In: Bianchi G, Guinot JC, Rzymkowski C (eds) Romansy 14. International Centre for Mechanical Sciences (Courses and Lectures), 2002, 438: 359–368, Springer, Vienna.
19.
KongXGosselinCM. Type synthesis of 3-DOF spherical parallel manipulators based on screw theory. J Mech Des2004; 126: 101–108.
20.
KongXGosselinCM. Type synthesis of three-degree-of-freedom spherical parallel manipulators. Int J Robot Res2004; 23: 237–245.
21.
Di GregorioR. A new parallel wrist using only revolute pairs: the 3-RUU wrist. Robotica2001; 19: 305–309.
22.
Di GregorioR. Kinematics of a new spherical parallel manipulator with three equal legs: the URC wrist. J Robot Syst2001; 18: 213–219.
23.
Di GregorioR. The 3-RRS wrist: a new, simple and non-overconstrained spherical parallel manipulator. J Mech Des2004; 126: 850–855.
24.
Di GregorioR. Kinematics of the 3-RSR wrist. IEEE Trans Robot2004, pp. 20: 750–753.
25.
ZarkandiS. A new geometric method for singularity analysis of spherical mechanisms. Robotica2011; 29: 1083–1092.
26.
GosselinCMAngelesJ. The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator. J Mech Trans Autom1989; 111: 202–207.
27.
Farzaneh KalooraziM-HTale MasoulehMCaroS. Determination of the maximal singularity-free workspace of 3-DOF parallel mechanisms with a constructive geometric approach. Mech Mach Theory2015; 84: 25–36.
28.
JiangaQGosselinCMWangaY, et al.Maximal singularity-free orientation workspace over a position region of Gough–Stewart platform. Adv Robot2015; 29: 1427–1436.
29.
EbrahimiICarreteroJABoudreauR. A Family of kinematically redundant planar parallel manipulators. J Mechl Des2008; 130: 062306–1.
30.
XuQLiY. Design and analysis of a new singularity-free three-prismatic-revolute-cylindrical translational parallel manipulator. Proc IMechE, Part C: J Mechanical Engineering Science2007; 221: 565–577.
31.
ValentiniPP. Effects of the dimensional and geometrical tolerances on the kinematic and dynamic performances of the Rzeppa ball joint. Proc IMechE, Part D: J Automobile Engineering2014; 228: 37–49.
32.
PennestrìERossiVSalviniP, et al.Review and kinematics of Rzeppa-type homokinetic joints with straight crossed tracks. Mech Mach Theory2015; 90: 142–161.
Salmon G, Lessons Introductory to the Modern Higher Algebra, Third Edition, 2017, Hansebooks, Germany.
35.
GosselinCMAngelesJ. Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Autom1990; 6: 281–290.
36.
Angeles J. Fundamentals of robotic mechanical systems. New York: Springer-Verlag, 1997, pp.181–188.
37.
ZarkandiS. Isotropy analysis of spherical mechanisms using an instantaneous-pole based method. Eng Sci Technol Int J2017; 20: 240–246.
38.
GosselinCMAngelesJ. A global performance index for the kinematic optimization of robotic manipulators. J Mech Des1991; 113: 220–226.
39.
ZhaoJ-ShFengZh-JDongJ-X. Computation of the configuration degree of freedom of a spatial parallel mechanism by using reciprocal screw theory. Mech Mach Theory2006; 41(12): 1486–1504.
40.
XuLLiQZhangN, et al.Mobility, kinematic analysis, and dimensional optimization of new three-degrees-of-freedom parallel manipulator with actuation redundancy. J Mech Robot2017; 9: 041008–041008.
41.
HuntKH. Constant-velocity shaft couplings: a general theory. Transe ASME J Engng Ind1979; 95: 445–464.
42.
ChengHGuptaKC. An historical note on finite rotations. J Appl Mech1989; 56: 139–145.
