In this paper, a novel design for gravity compensation of manipulators has been introduced and its effect on the static and dynamic performance has been studied. The gravity compensation mechanism (GCM) of this study deploys a symmetrical configuration for the pulleys and cable to reduce the tension in the cable without requiring additional space for longer springs and their displacements. The reduction of cable tension significantly increases the durability of the proposed GCM, which tackles one of the most critical issues of the cable-pulley based gravity compensating systems. The configuration of the proposed GCM also distributes equal internal forces and moments over the joints of the manipulator. As a key part of the design, the dynamic performance of the manipulator is evaluated before and after it is equipped with the GCM. The dynamic manipulability ellipse is used to measure the variations in dynamic performance. Implementation on a real multi-degree-of-freedom (DOF) manipulator showed the effectiveness of the proposed GCM in gravity compensation and also its simplicity of extension and larger achievable workspace comparing to the previous works.
BarentsRSchenkMvan DorsserWD, et al.Spring-to-spring balancing as energy-free adjustment method in gravity equilibrators. J Mech Des2011; 133.
7.
GosselinCM.Static balancing of spherical 3-DOF parallel mechanisms and manipulators. Int J Robotics Res1999; 18: 819–829.
8.
YunS-HSeoJYoonJ, et al.IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS), Macau, China IEEE, 20192019, pp. 3565–3570.3-DOF gravity compensation mechanism for robot waists with the variations of center of mass
9.
CiupituLVladareanuL. Adaptive Balancing by Counterweights of Robots and Mechatronic Systems. Int J Model Optimization2018; 8.
10.
AhnK-HLeeW-BSongJ-B. IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS) Daejeon, Korea IEEE, 20162016, pp. 4344–4349.Reduction in gravitational torques of an industrial robot equipped with 2 DOF passive counterbalance mechanisms
11.
LeeW-BLeeS-DSongJ-B. IEEE International Conference on Robotics and Automation. ICRA), Singapore, IEEE, 20172017, pp. 3696–3701.Design of a 6-DOF collaborative robot arm with counterbalance mechanisms
12.
NguyenVLLinC-YKuoC-H. Gravity compensation design of planar articulated robotic arms using the gear-spring modules. J Mech Robotics2020; 12.
13.
SuhJ-wChoiE-c. Design and Verification of a Gravity-Compensated Tool Handler for Supporting an Automatic Hair-Implanting Device. IEEE Robot Autom Lett2019; 4: 4410–4417.
14.
EndoGYamadaHYajimaA, et al. A weight compensation mechanism with a non-circular pulley and a spring: Application to a parallel four-bar linkage arm. SICE J Control Meas Syst Integration2010; 3: 130–136.
15.
KimBDeshpandeAD. Design of nonlinear rotational stiffness using a noncircular pulley-spring mechanism. J Mech Robotics2014; 6: 041009.
16.
NguyenH-NShiehW-B. New Advances in Mechanism and Machine Science. Switzerland: Springer, 2018, pp. 13–25.On the Design of the Gravity Balancer Using Scotch Yoke Derivative Mechanism
17.
KoserK. A cam mechanism for gravity-balancing. Mech Res Commun2009; 36: 523–530.
18.
FukushimaEFDebenestPTojoY, et al.Teleoperated buggy vehicle and weight balanced arm for mechanization of mine detection and clearance tasks. Proc HUDEM2005: 58–63.
19.
ArakelianVZhangY. An improved design of gravity compensators based on the inverted slider-crank mechanism. J Mech Robotics2019; 11.
20.
KimH-SMinJ-KSongJ-B. Multiple-degree-of-freedom counterbalance robot arm based on slider-crank mechanism and bevel gear units. IEEE Trans Robotics2015; 32: 230–235.
21.
ChengP-YChengK-J. Evaluation of the dynamic performance variation of a serial manipulator after eliminating the self-weight influence. Mechatronics2011; 21: 993–1002.
22.
BudynasRGNisbettJK. Shigley’s: Mechanical engineering design. Shigley’s Mech Eng Des2011: 303–308.
23.
KimH-SSongJ-B. Multi-DOF counterbalance mechanism for a service robot arm. Ieee/asme Trans Mechatron2014; 19: 1756–1763.
24.
LeeDSeoT. Lightweight multi-DOF manipulator with wire-driven gravity compensation mechanism. Ieee/asme Trans Mechatron2017; 22: 1308–1314.
25.
AzadMBabičJMistryM. Effects of the weighting matrix on dynamic manipulability of robots. Auton Robot2019; 43: 1867–1879.
26.
YoshikawaT. Manipulability of robotic mechanisms. International Journal Robotics Res1985; 4: 3–9.
27.
HeYMeiJZangJ, et al.Multicriteria optimization design for end effector mounting bracket of a high speed and heavy load palletizing robot. Math Probl Eng2018; 2018.
