Numerical investigation on thermal-hydraulic performance of air preheater equipped with helical inserts

Abstract

In the present work, a numerical study has been done for the air preheater equipped with different types of helical inserts inside the tubes with segmental baffles in shell. The simulations have been carried out to analyse the heat transfer rate in terms of heat transfer coefficient and friction factor with ANSYS 18.0. The air preheater is divided into two sections shell side and tube side, which contains ambient air and flue gases respectively. The air preheater consists of 34 tubes with a length of 3 m. In the present study, three different types of inserts are investigated with a pitch to diameter ratio (p/d) of 2, 1.7 and 1.4, and the number of turns of 100, 87 and 73, respectively. The insert under study is helical shaped with circular cross-section of diameter 20 mm. Four different values of Reynolds number are used in the range of 4000–24,000. The effects of pressure drop, heat transfer coefficient on different pitch to diameter ratio (p/d) 2, 1.7 and 1.4 of inserts and on the plain tube are discussed in this present work. The results of an air preheater with inserts in tubes get higher value of heat transfer coefficient as compared to the plain tubes. The thermal performance factor of air preheater with inserts of (p/d = 1.4) shows higher factor of 2.31 as compared to the plain tubes at low Reynolds number.

Keywords

Air preheater helical inserts thermal performance factor heat transfer coefficient

Get full access to this article

View all access options for this article.

References

Wang

Deng

Tang

, et al. Thermal deformation prediction based on the temperature distribution of the rotor in rotary air-preheater. Appl Therm Eng 2015; 90: 478–488.

Chen

Pan

Shao

, et al. Corrosion and viscous ash deposition of a rotary air preheater in a coal-fired power plant. Appl Therm Eng 2017; 113: 373–385.

Zainith

Mishra

NK.

A comparative study on thermal-hydraulic performance of different non-Newtonian nanofluids through an elliptical annulus. J Therm Sci Eng Appl 2021; 13(5): 051027.

Zainith

Mishra

NK.

Experimental and numerical investigations on Exergy and second law efficiency of shell and helical coil heat exchanger using carboxymethyl cellulose based Non-Newtonian nanofluids. Int J Thermophys 2022; 43(1): 1–29.

Zainith

Mishra

NK.

Experimental investigations on stability and viscosity of carboxymethyl cellulose (CMC)-Based Non-Newtonian nanofluids with different nanoparticles with the combination of distilled water. Int J Thermophys 2021; 42(10): 1–21.

Zainith

Mishra

NK.

Experimental investigations on heat transfer enhancement for horizontal helical coil heat exchanger with different curvature ratios using carboxymethyl cellulose-based non-Newtonian nanofluids. Heat Transf Res 2021; 52(16): 49–67.

Painuly

Zainith

Mishra

NK.

Heat transfer enhancement in a helically corrugated tube by employing W/EG based hybrid non-Newtonian nanofluid under turbulent conditions. J Enhanced Heat Transf 2021; 29(1), 1–25. DOI: 10.1615/JEnhHeatTransf.2021039935

Jin

Liu

Chen

, et al. CFD analysis on flow resistance characteristics of six-start spirally corrugated tube. Int J Heat Mass Transf 2016; 103: 1198–1207.

Hashemian

Jafarmadar

Nasiri

, et al. Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form. Appl Therm Eng 2017; 118: 408–417.

10.

Gomaa

Halim

Elsaid

AM.

Enhancement of cooling characteristics and optimization of a triple concentric-tube heat exchanger with inserted ribs. Int J Therm Sci 2017; 120: 106–120.

11.

Rainieri

Bozzoli

Cattani

, et al. Compound convective heat transfer enhancement in helically coiled wall corrugated tubes. Int J Heat Mass Transf 2013; 59: 353–362.

12.

Sengupta

Chakraborty

Assessment of thermal performance of semicircular fin under forced air convection: application to air-preheater. Energy Proc 2014; 54: 479–493.

13.

Wang

Wen

An experimental investigation of heat transfer enhancement for a shell-and-tube heat exchanger. Appl Therm Eng 2009; 29(11-12): 2433–2438.

14.

El Maakoul

Laknizi

Saadeddine

, et al. Numerical comparison of shell-side performance for Shell and tube heat exchangers with Trefoil-Hole, helical and segmental baffles. Appl Therm Eng 2016; 109: 175–185.

15.

Zhang

Tao

WQ.

3D numerical simulation on Shell-and-Tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part I: Numerical Model and results of whole heat exchanger with middle-overlapped helical baffles. Int J Heat Mass Transf 2009; 52(23–24): 5371–5380.

16.

Nemati Taher

Zeyninejad Movassag

Razmi

, et al. Baffle Space Impact on the performance of helical baffle shell and tube heat exchangers. Appl Therm Eng 2012; 44: 143–149.

17.

Eryener

Thermoeconomic optimization of baffle spacing for Shell and tube heat exchangers. Energy Convers Manag 2006; 47(11-12): 1478–1489.

18.

Kottke

Effect of baffle spacing on pressure drop and local heat transfer in Shell-and-Tube heat exchangers for staggered tube arrangement. Int J Heat Mass Transf 1998; 41(10): 1303–1311.

19.

, et al. Characteristics of heat transfer and fluid flow in a fractal multilayer silicon microchannel. Int Commun Heat Mass Transf 2016; 71: 86–95.

20.

Fettaka

Thibault

Gupta

Design of Shell-and-Tube heat exchangers using multiobjective optimization. Int J Heat Mass Transf 2013; 60: 343–354.

21.

Keklikcioglu

Ozceyhan

Experimental investigation on heat transfer enhancement in a circular tube with equilateral triangle cross sectioned coiled-wire inserts. Appl Therm Eng 2018; 131: 686–695.

22.

Launder

Spalding

DB.

Lectures in mathematical models of turbulence. London: Academic Press, 1972.

23.

Bianco

Manca

Nardini

. Numerical investigation on nanofluids turbulent convection heat transfer inside a circular tube. Int J Therm Sci 2011; 50(3): 341–349.

24.

Chen

Sheng

Dong

, et al. Numerical simulation on flow field in circumferential overlap trisection helical baffle heat exchanger. Appl Therm Eng 2013; 50(1): 1035–1043.

25.

Zheng

Han

Asif

, et al. Effect of Al2O3/water nanofluid on heat transfer of turbulent flow in the inner pipe of a double-pipe heat exchanger. Heat Mass Transf 2020; 56(4): 1127–1140.

26.

Bazdar

Toghraie

Pourfattah

, et al. Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths. J Therm Anal Calorim 2020; 139(3): 2365–2380.

27.

Celik

Ghia

Roache

, et al. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. J Fluids Eng Trans ASME 2008; 130(7): 078001.