Modeling and analysis of high-frequency dynamic characteristics of double isolation rubber mounts

Rubber mounts are the vital component to reduce the vibration translated from the powertrain to the vehicle body. The dynamic stiffness of the conventional rubber mount increase with the increase of the excitation frequency, and form a peak under high-frequency excitation in the battery electric vehicle (BEV). So the double isolation rubber mount has gradually been used in the BEV powertrain to improve the vibration isolation performance in the high-frequency range. Compared with conventional rubber mounts, the double isolation rubber mount has smaller dynamic stiffness in the high-frequency range. However, the traditional simulation model of the dynamic characteristics cannot consider the influence of the metal bracket of the double isolation rubber mount on the dynamic characteristics. Therefore, it is necessary to carry out the modeling and analysis of the dynamic characteristics simulation model of the double isolation rubber mount. In this paper, a general dynamic model of double isolation rubber mounts is proposed to describe the high-frequency dynamic characteristics. In this general dynamic model, the complex stiffness element representing the viscoelasticity of rubber is expressed using the fractional derivative model and the Maxwell model, respectively, and two high-frequency dynamic models are established. Two model parameter identification methods are proposed for high-frequency dynamic models of double isolation rubber mounts, and the identification results are compared and analyzed. Then, two high-frequency dynamic models are used to simulate the high-frequency dynamic characteristics of double isolation rubber mounts. The simulation results show that both high-frequency dynamic models can calculate the high-frequency dynamic characteristics of double isolation rubber mounts. Among them, the dynamic model based on fractional derivative elements has relatively high accuracy, and the dynamic model based on Maxwell elements has relatively high stability. The high-frequency dynamic characteristic modeling method of double isolation rubber mounts presented in this paper is helpful to the vibration and noise analysis of electric vehicle powertrain systems under high-frequency excitation.