Clutch engagement plays a critical role in the driving comfort of hybrid electric vehicles (HEVs). In particular, the non-linearities of springs and the uncertainties of friction wear in dry-clutch systems significantly influence clutch torque transmissibility. As an accurate clutch torque model is essential for precise control, this study develops a detailed model of a normally-open, pull-type dry clutch that incorporates nonlinear component characteristics along with the dynamics of the pressure plate and actuator. The clutch model is integrated into a powertrain model to investigate the influences of these nonlinear characteristics on the entire system. A control strategy is proposed to ensure rapid clutch engagement, and modal analysis is conducted to analyze the dynamic characteristics of the powertrain. Vehicle startup from a standstill is simulated to assess performance based upon dry-clutch torque transmissibility, friction work, vehicle jerk, and engagement duration. Results from both the theoretical modal analysis and transient dynamic simulations demonstrate that vehicle body vibrations during clutch engagement are primarily governed by the first-order mode. Additionally, as friction wear increases, clutch torque declines while friction work and slipping duration increase significantly, which considerably degrades engagement performance. This research establishes a foundation for designing precise clutch controllers in HEVs, specifically by accounting for the impacts of frictional wear.
BiFMaTWangX. Development of a novel knock characteristic detection method for gasoline engines based on wavelet-denoising and EMD decomposition. Mech Syst Signal Process2019; 117: 517–536. https://doi.org/10.1016/j.ymssp.2018.08.008
2.
NingTLuBOuyangX, et al. Towards scenario-cognitive: the development prospective of electric vehicles energy management strategy. Automot Innov2026; 9: 191–212. https://doi.org/10.1007/s42154-025-00367-7
3.
MusardoCRizzoniGGuezennecY, et al. A-ECMS: an adaptive algorithm for hybrid electric vehicle energy management. Eur J Control2005; 11(4): 509–524. https://doi.org/10.3166/ejc.11.509-524
4.
KimSParkJHongJ, et al. Transient control strategy of hybrid electric vehicle during mode change. Technical Report 2009-01-0228, SAE International, 2009. https://doi.org/10.4271/2009-01-0228
5.
HanLZhouXYangN, et al. Hierarchical energy management for extended-range electric vehicles considering range extender dynamic coordination. J Power Sources2024; 622: 235349. https://doi.org/10.1016/j.jpowsour.2024.235349
6.
TianXCaiYSunX, et al. An adaptive ECMS with driving style recognition for energy optimization of parallel hybrid electric buses. Energy2019; 189: 116151. https://doi.org/10.1016/j.energy.2019.116151
SunJXingGLiuX, et al. A novel torque coordination control strategy of a single-shaft parallel hybrid electric vehicle based on model predictive control. Math Probl Eng2015; 1: 960678. https://doi.org/10.1155/2015/960678
9.
HeijdenACVDSerrarensAFACamlibelMK, et al. Hybrid optimal control of dry clutch engagement. Int J Control2007; 80(11): 1717–1728. https://doi.org/10.1080/00207170701473995
10.
LiLWangXQiX, et al. Automatic clutch control based on estimation of resistance torque for AMT. IEEE/ASME Trans Mechatron2016; 21(6): 2682–2693. https://doi.org/10.1109/tmech.2016.2517088
VascaFIannelliLSenatoreA, et al. Modeling torque transmissibility for automotive dry clutch engagement. In: 2008 American control conference, Seattle, WA, 11–13 June 2008, pp.306–311. IEEE. https://doi.org/10.1109/ACC.2008.4586508
13.
ZhaoZHeLYangY, et al. Estimation of torque transmitted by clutch during shifting process for dry dual clutch transmission. Mech Syst Signal Process2016; 75: 413–433. https://doi.org/10.1016/j.ymssp.2015.12.027
14.
VascaFIannelliLSenatoreA, et al. Torque transmissibility assessment for automotive dry-clutch engagement. IEEE/ASME Trans Mechatron2011; 16(3): 564–573. https://doi.org/10.1109/TMECH.2010.2047509
15.
OzansoyOTevruzTMuganA. Multiobjective Pareto optimal design of a clutch system. Int J Eng Technol2015; 1(1): 26–43. https://doi.org/10.19072/ijet.105704
16.
SenatoreAHochlenertDD’AgostinoV, et al. Driveline dynamics simulation and analysis of the dry clutch friction-induced vibrations in the eek frequency range. ASME Int Mech Eng Congr Expos2013; 13: 64597. https://doi.org/10.1115/IMECE2013-64597
ChenWPengJMaY, et al. Eco-driving framework for hybrid electric vehicles in multi-lane scenarios by using deep reinforcement learning methods. Green Energy Intell Transp2026; 5(2): 100309. https://doi.org/10.1016/j.geits.2025.100309
19.
LiuGShenSLiuY, et al. Energy-saving control of intelligent connected plug-in hybrid electric vehicle via fusing driving intention of front vehicle. Green Energy Intell Transp2026; 5(2): 100330. https://doi.org/10.1016/j.geits.2025.100330
20.
HeYKarimiHRMeiP. Cooperative multi-agent deep reinforcement learning-based eco-driving strategy for hybrid electric vehicles at multi-intersection scenarios. Neurocomputing2026; 668: 132412. https://doi.org/10.1016/j.neucom.2025.132412
21.
YanZWuBGaoX, et al. Engagement/disengagement characteristics of pull-type diaphragm spring clutch for heavy-duty commercial vehicles. Chin J Mech Eng2024; 37(1): 124. https://doi.org/10.1186/s10033-024-01115-4
PicaGCervoneCSenatoreA, et al. Dry dual clutch torque model with temperature and slip speed effects. Intell Industr Syst2016; 2(2): 133–147. https://doi.org/10.1007/s40903-016-0049-6
24.
SunSLeiYFuY, et al. Analysis of thermal load for dry clutch under the frequent launching condition. Technical Report 2013-01-0814, SAE International, 2013. https://doi.org/10.4271/2013-01-0814
25.
SeoHChaSWLeeK, et al. Dry type engine clutch control for a parallel HEV at launch start condition. In: 2014 IEEE vehicle power and propulsion conference (VPPC), Coimbra, Portugal, 27–30 October 2014, pp.1–4. IEEE. https://doi.org/10.1109/VPPC.2014.7007053
BeaudoinMABouletB. Fundamental limitations to no-jerk gearshifts of multi-speed transmission architectures in electric vehicles. Mech Mach Theory2021; 160: 104290. https://doi.org/10.1016/j.mechmachtheory.2021.104290
29.
TianYYangHMoW, et al. Optimal coordinating gearshift control of a two-speed transmission for battery electric vehicles. Mech Syst Signal Process2020; 136: 106521. https://doi.org/10.1016/j.ymssp.2019.106521
30.
KimJChoiSB. Control of dry clutch engagement for vehicle launches via a shaft torque observer. In: Proceedings of the 2010 American control conference, Baltimore, MD, 30 June–2 July 2020, pp.676–681. IEEE. https://doi.org/10.1109/ACC.2010.5531120
31.
AhnSHongS. Clamping force control for dry-type dual clutch transmission using kissing point estimation. SAE Int J Passeng Cars Mech Syst2013; 6(3): 1505–1509. https://doi.org/10.4271/2013-01-2585
32.
Yong-HaiW. Multi-objective optimization design of vehicle clutch diaphragm spring. In: 2009 second international conference on intelligent computation technology and automation, Changsha, China, Vol. 3, 10–11 October 2009, pp.194–197. IEEE. https://doi.org/10.1109/ICICTA.2009.513
33.
GlielmoLIannelliLVaccaV, et al. Gearshift control for automated manual transmissions. IEEE/ASME Trans Mechatron2006; 11(1): 17–26. https://doi.org/10.1109/TMECH.2005.863369
34.
GuoWLiuYZhangJ, et al. Dynamic analysis and control of the clutch filling process in clutch-to-clutch transmissions. Math Probl Eng2014; 2014(1): 293637. https://doi.org/10.1155/2014/293637
35.
CavinaNOliviDCortiE, et al. Development of a dual clutch transmission model for real-time applications. In: IFAC proceedings volumes, IFP Energies nouvelles, Rueil-Malmaison, France, 23–25 October 2012, pp.440–447. Elsevier Ltd. https://doi.org/10.3182/20121023-3-FR-4025.00006
ZhuMLiuXKanF, et al. Life cycle prediction and evaluation of clutch friction plate considering wear models and thermal stress. J Tribol2020; 143(4). https://doi.org/10.1115/1.4048383
38.
ZhangZMaX. Friction-induced nonlinear dynamics in a spline-rotor system: numerical and experimental studies. Int J Mech Sci2024; 278: 109427. https://doi.org/10.1016/j.ijmecsci.2024.109427
39.
ŞahinYMalgacaLKaragülleH. Analysis of active vibration control of multi-degree-of-freedom flexible systems by Newmark method. Simul Modell Pract Theory2016; 69: 136–148. https://doi.org/10.1016/j.simpat.2016.06.004
40.
ŞahinYAkdağMKaragülleH. A fast processing method to perform transient analysis for vibration control. Simul Modell Pract Theory2020; 104: 102152. https://doi.org/10.1016/j.simpat.2020.102152
