Complex shaped micro-channels generation using tools fabricated by AWJ milling process

Abstract

Fabrication of complex shape micro-channels is a major challenge for manufacturing industries. Currently in commercial applications, lithography and non-conventional machining processes like lasers, electro-discharge machining (EDM) and chemical etching are commonly used for fabrication of these channels. In the present work, a novel Abrasive water jet (AWJ) milling based tool fabrication strategy has been proposed and implemented to make micro-tools (die/ electrode). The path strategy for jet movement is considered in a manner to selectively remove metal from a piece of material such that the resulting three-dimensional features become the required die shape that can be used as tool for the texturing process. Micro-tool of complex shape as fabricated on hard material (EN 31) sheet of 12 mm thickness and its geometry were analysed by controlling the step over (SO) distance. Hydraulic control based hard press contact texturing setup was developed to analyse the performance of such fabricated tools. Experiments were conducted on soft materials like, PMMA, Copper, Brass, aluminium and Nylon. Taper along the depth of the channels was observed because of the taper of the tool during fabrication. During fabrication, width of the tool less than 200 μm was found wavi in nature as there was not enough backing material present to bear the side wise jet pressure of impinging jet. Buckling on the tools was observed with tool height greater than 1 mm.

Keywords

AWJ milling fabrication micro-channels micro-tool hydraulic texturing

Get full access to this article

View all access options for this article.

References

Kagaya

Oishi

Yada

. Micro-electro discharge machining using water as working fluid, micro-hole drilling. Precision engineering 1986; 8: 156–162.

Rajurkar

Sundaram

Malshe

. Review of electrochemical and electro discharge machining. Procedia CIRP 2013; 6: 13–26.

Fleischer

Masuzawa

Schmidt

, et al. New applications for micro-EDM. J. Mater. Proc. Tech. 2004; 149: 246–249.

Zaw

Fuh

JYH

Nee

AYC

, et al. Formation of a new EDM electrode material using sintering techniques. J Mater Proc Tech 1999; 89–90: 182–186.

Jain

. Advanced machining processes” electrochemical machining (ECM). 2002; 232–279. New Dehli: Allied publishers.

Youqiang

Jianxin

Xiuting

, et al. Effect of laser surface texturing on Si3N4/T iC ceramic sliding against steel under dry friction. Materials and Design 2013; 52: 234–245.

Wong

Fuh

JYH

, et al. Effect of TiC in copper–tungsten electrodes on EDM performance. J Mater Proc Tech 2001; 113: 563–567.

Kovacevic

. Surface texture in abrasive water jet cutting. J of Manuf Sys. 1991; 10: 32–40.

Laurinat

Louis

Meier-Wiechert . Genetic Algorithm Model for Milling with Abrasive Water Jet In: Hashish M (ed.) 1993 Proceedings of the 7th American Water Jet, Vol.1, Water jet Association, St, Luis, 1993;119–139.

10.

Hashish

. Controlled-depth Milling Techniques Using Abrasive-Waterjets, In: Allen N G (ed) 1994 Jet Cutting Technology, Mechnical Engineering Publication Ltd, London 1994;449–461.

11.

Wang

Zhong

. Enhancing the depth of cut in abrasive water jet cutting of alumina Ceramica by using multipass cutting with nozzle oscillation. International Journal of Machining Science and Technology 2009; 13: 76–91.

12.

Karakurt

. An experimental study on the depth of Cut of granite in abrasive waterjet cutting. International Journal of Materials and manufacturing processes 2012; 27: 538–544.

13.

Fowler

Shipway

Pashby

. Characteristics of the surface of a titanium alloy following milling with abrasive waterjets. Wear 2005; 258: 123–132.

14.

Pal

Tandon

. Identification of role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet. International Journal of Advanced Manufacturing Technology 2011; 66: 877–881.

15.

Srinivasu

Axinte

. An analytical model for top width of jet footprint in abrasive waterjet milling: a case study on SiC ceramics. Proc. IMechE Part B: J. Engineering Manufacture 2010; 225: 319–335.

16.

Pal

Choudhury

. Fabrication and analysis of micro pillars by using abrasive water jet machining. J. of Proc. Mater. Science 2014; 6: 61–71.

17.

Fowler

Shipway

Pashby

. A technical note on grit embedment following abrasive water jet milling of titanium alloy. J of Mat Proc Tech 2005; 159: 356–368.