Analysis of the temperature of the rail/wheel contact surface using a half-space model and a moving heat source

Abstract

The model can be used to analyse the thermal processes due to a frictional block or disc braking or to analyse the temperature conditions close to the ril/wheel contact patch, when macroscopic sliding occurs. It is especially useful in the evaluation of rail chill, head check and other contact tribology-based local heat and stress effects. The contact seizure theory of gear drives developed by Blok is based on a simplified approach to the determination of the temperature due a moving heat source generated by sliding friction. In a simplifying step, the heat flux parallel to the surface of the contacting bodies is disregarded. One-dimensional temperature patterns that vary with time are arranged along the line of motion, based on the displacement of the source. This one-dimensional model is applicable if the velocity (i.e. Péclet number) is ‘high enough’. The influence of the width of the source has not been examined. The literature contains analytical results for various heat flux models, and one can make use of them to overcome the restrictions inherent in the one-dimensional theory. However, their rather complex structure makes them unsuited for further analysis, and only the numerical analysis method appears to be fruitful. One approach is to describe the temperature conditions created in a plate, which extends on a half-plane, by heating a part of its edge. The obtained time-dependent temperature results can be arranged into a sequence in a similar manner as in the approach of Blok. This shows the spatial temperature distribution that can be obtained by enhancing the results obtained using the one-dimensional theory by considering the effect of the crosswise dispersed heat. For heat sources of limited width, the cross-corrected approach better fits the reference values given by a full three-dimensional model. In railway traction, the analysis can be most directly applied to gear drives with a localized load pattern.

Keywords

Rail wheel heat flow wheel/rail contact wear sliding friction traction seizure Péclet number railway technology/engineering

Get full access to this article

View all access options for this article.

References

Blok H. Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. In: Proceedings of the general discussion on lubrication and lubricants, London, UK, 1937, pp.222–235. London, UK: IMechE.

Carslaw

Jaeger

. Conduction of heat in solids, Oxford, UK: Oxford University Press, 1959.

Terauchi

Hamamoto

. On the surface temperature rise caused by frictional heating. J JSLE 1970; 15: 133–138.

Vernersson T. Tread braking of railway wheels – noise-related tread roughness and dimensioning wheel temperatures. PhD Thesis, Chalmers University of Technology, Sweden, 2006.

Akbari M, Sinton D and Bahrami M. Moving heat sources in a half-space: effect of source geometry. In: The ASME heat transfer summer conference, San Francisco, Calif. USA, July 19–23, 2009, Paper HT2009-88562, 685–694: ASME New York N.Y.

Ertz

Knothe

. A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contact. Wear 2002; 253: 498–508.

Ertz

. Temperatur, materialbeanspruchung und kraftschluss im rad-schiene-kontakt, Report 549, 2003. Düsseldorf, Germany: VDI Verlag, 2003.

Sábitz L and Zobory I. Simulation of local heat processes on the tread of block-braked railway wheel. In: Zobory I (ed.) The 13th mini conference on vehicle system dynamics, identification and anomalies, Budapest, Hungary, 5–7 November 2012, pp.245–252. Budapest Univ. of Technology and Econ., Budapest.

Dollevoet R. Design of an Anti Head Check profile based on stress relief. PhD Thesis, University of Twente, The Netherlands, 2010.