Reduction of vertical abnormal vibration in carbodies of low-floor railway trains by using a dynamic vibration absorber

Abstract

A field test on the dynamic performance of a 100% low-floor railway train with five cars was conducted, and a vertical vibration at around 8 Hz was mainly studied for the background of the research. The vibration around 8 Hz, defined as the abnormal vertical vibration, was proved to be due to the pitching motion of the carbodies, which significantly affected the dynamic performance of the vehicle with a maximum increase of 0.309 in the vertical Sperling index. The dynamic vibration absorber theory was applied to reduce the abnormal vibration of carbodies to around 8 Hz by building a vertical mathematic model and a three-dimensional dynamical simulation model. The results of the theoretical analysis show that the stiffness of the articulated device between carbodies is the reason for the pitching motions at around 8 Hz, and the stiffness significantly affects the main frequency of the vertical vibration of carbodies. What’s more, the application of dynamic vibration absorber theory on low-floor railway trains can reduce the vertical abnormal vibration effectively. Yet, reasonable suspension parameters are needed; otherwise, the vibration of carbodies, including the mass ratio, the suspension frequency, the damping ratio, and the suspended location would be aggravated. Optimal suspension parameters of the dynamic vibration absorber system were used in the simulation model, and the result shows a good agreement with the numerical results; the attached dynamic vibration absorber system on carbodies significantly reduces the vibration of carbodies at around 8 Hz. However, it should be noted that the dynamic vibration absorber is only effective at high-speed stage (beyond 40 km/h) where the pitching motion of carbodies is obvious; this conclusion is consistent with the results of the field test.

Keywords

Low-floor railway train carbody abnormal vibration pitching motion dynamic vibration absorber vibration reduction

Get full access to this article

View all access options for this article.

References

Zhang

Xiao

Zhang

et al.

Study on transfer path characteristic of interior noise of 100% low-floor railway train. J Vib Eng 2015; 28: 541–549.

Dai

Ding

. Modeling and dynamics analysis of 70% low-floor light rail vehicles. J Trfc Trans Eng 2004; 4: 49–52.

Hoshi

Ookubo

Murakami

et al.

Development of bogie for user friendly, extra low floor, light rail vehicle (LRV) using independent wheel system and next generation LRV. Mitsubishi Heavy Industries, Ltd. Tech Rev 2007; 44: 1–4.

Jeong W, Kwon SB, Park DS, et al. Efficient railway efficient energy management for onboard batterydriven light railway vehicle. In: Ninth World Congress on Railway Research of Traffic and Transportation Engineering. Lille, France, 22–26 May 2011, pp.1–8. Paris: Spark.

Huang

Zeng

Luo

et al.

Numerical and experimental studies on the car body flexible vibration reduction due to the effect of car body-mounted equipment. Proc IMechE, Part F: J Rail and Rapid Transit 2018; 232: 103–120.

Zhu

Yang

Yan

et al.

Low-frequency vibration control of floating slab tracks using dynamic vibration absorbers. Veh Syst Dyn 2015; 53: 1296–1314.

Hartog

. Mechanical vibrations, New York: Dover Publications Inc., 1985.

Tang

Brennan

Gatti

et al.

Ferguson, Experimental characterization of a nonlinear vibration absorber using free vibration. J Sound Vib 2016; 67: 159–169.

Bonsel

Fey

Nijmeijer

. Application of a dynamic vibration absorber to a piecewise linear beam system. Nonlinear Dyn 2004; 37: 227–243.

10.

Shi

. A nonlinear rubber spring model containing fractional derivatives for use in railroad vehicle dynamic analysis. Proc IMechE, Part F: J Rail and Rapid Transit 2016; 30: 1745–1759.

11.

Cheung

Wong

Cheng

. Optimization of a hybrid vibration absorber for vibration control of structures under random force excitation. J Sound Vib 2013; 32: 494–509.

12.

Wang

Liao

. The lateral stability of train suspension systems employing inerter. Veh Syst Dyn 2010; 8: 619–643.

13.

Tomioka

Takigami

. Experimental and numerical study on the effect due to passengers on flexural vibrations in railway vehicle carbodies. J Sound Vib 2015; 343: 1–19.

14.

Wang

Zeng

Luo

et al.

Study on vibration behavior of carbody underneath suspended systems under wheel profile wear. J Mech Eng 2016; 52: 113–118.

15.

Shi

. Flexible vibration analysis for car body of high-speed EMU. J Mech Sci Technol 2016; 30: 55–66.

16.

Samani

Pellicano

Masoumi

. Performance of dynamic vibration absorbers for beams subjected to moving loads. Nonlinear Dyn 2013; 73: 1065–1079.

17.

Cheung

Wong

Cheng

. A subsystem approach for analysis of dynamic vibration absorbers suppressing broadband vibration. J Sound Vib 2015; 342: 75–89.

18.

Yao

Zhang

Liu

. The active control of the lateral movement of a motor suspended under a high-speed locomotive. Proc IMechE, Part F: J Rail and Rapid Transit 2016; 230: 1509–1520.