Analysis of a mechanism with redundant drive for antenna pointing

Abstract

Orientation accuracy is a key factor in the design of mechanisms for antenna pointing. Our design uses a redundantly actuated parallel mechanism which may provide an effective way to solve this problem, and even can increase its payload capability and reliability. The presented mechanism can be driven by rotary motors fixed on the base to reduce the inertia of the moving parts and to lower the power consumption. The mechanism is redundantly actuated by three arms, and is used as a two-dimensional antenna tracking and pointing device. Both the forward and inverse kinematics are investigated to find all the possible solutions. Detailed characters of the platform are analyzed to demonstrate the advantages in eliminating singularities and improving pointing accuracy. A method of calculating the overconstrained orientational error is also proposed based on the differential kinematics. All the methods are verified by numerical examples.

Keywords

Antenna pointing mechanism redundant drive orientation workspace singularity analysis error analysis

Get full access to this article

View all access options for this article.

References

Dunlop

Jones

. Position analysis of a two DOF parallel mechanism – the Canterbury tracker. Mech Mach Theory 1999; 34(4): 599–614.

Sofka

. Omni-Wrist III – a new generation of pointing devices. Part I. Laser beam steering devices – mathematical modeling. IEEE Transac Aerospace Electron Syst 2006; 42: 718–25.

Carricato

Parenti-Castelli

. A novel fully decoupled two-degrees-of-freedom parallel wrist. Int J Robot Res 2004; 23(6): 661–667.

Gogu G. Fully-isotropic over-constrained parallel wrists with two degrees of freedom. In: 2005 IEEE international conference on robotics and automation, 18–22 April 2005. Barcelona, Spain: Institute of Electrical and Electronics Engineers Inc.

Jianyong Z, et al. Workspace and kinematics analysis of a 2-DOF Decoupled spherical parallel mechanism. In: 15th international conference on mechatronics and machine vision in practice, Auckland, New Zealand, 2–4 December 2008. Availble at: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4749567.

. Mobility and singularity analysis of a class of two degrees of freedom rotational parallel mechanisms using a visual graphic approach. J Mech Robot 2012; 4: 041006-1–041006-10. Available at: http://mechanismsrobotics.asmedigitalcollection.asme.org/article.aspx?articleid=1484802.

Merriam

. Monolithic 2 DOF fully compliant space pointing mechanism. Mech Sci 2013; 4: 381–390.

Palpacelli

Palmieri

Callegari

. A redundantly actuated 2-degrees-of-freedom mini pointing device. J Mech Robot 2012; 4: 031012-1–031012-10. Available at: http://mechanismsrobotics.asmedigitalcollection.asme.org/article.aspx?articleid=1484783.

Shao

. Modeling and design of a novel precision tilt positioning mechanism for inter-satellite optical communication. Smart Mater Struct 2009; 18: 035009-1–035009-6. Available at: http://iopscience.iop.org/article/10.1088/0964-1726/18/3/035009/meta.

10.

Saglia

. A high-performance redundantly actuated parallel mechanism for ankle rehabilitation. Int J Robot Res 2009; 28: 1216–1227.

11.

Wang

. Design and kinematical performance analysis of a 3-RUS/RRR redundantly actuated parallel mechanism for ankle rehabilitation. J Mech Robot 2013; 5: 041003-1–041003-11. Available at: http://mechanismsrobotics.asmedigitalcollection.asme.org/article.aspx?articleid=1714581.

12.

Leguay-Durand

Reboulet

. Optimal design of a redundant spherical parallel manipulator. Robotica 1997; 15: 399–405.

13.

Wiitala

Stanišić

. Design of an overconstrained and dextrous spherical wrist. J Mech Des 1998; 122: 347–353.

14.

Enferadi

Tootoonchi

. A novel spherical parallel manipulator: forward position problem, singularity analysis, and isotropy design. Robotica 2009; 27: 663–676.

15.

Di Gregorio

. A new family of spherical parallel manipulators. Robotica 2002; 20: 353–358.

16.

Lenarcic

Stanisic

. A humanoid shoulder complex and the humeral pointing kinematics. IEEE Trans Robot Automat 2003; 19: 499–506.

17.

Lenarcic J, Stanisic MM and Parenti-Castelli V. Kinematic design of a humanoid robotic shoulder complex. In: ICRA 2000 IEEE international conference on robotics and automation, 24–28 April 2000. San Francisco, CA, USA: IEEE, pp. 27–32.

18.

De Sapio V, Holzbaur K and Khatib O. The control of kinematically constrained shoulder complexes: physiological and humanoid examples. In: IEEE international conference on Robotics and automation, Orlando, Florida, USA, 15–19 May 2006, pp. 2952–2959.

19.

Seok-Hee L, et al. Kinematic analysis and implementation of a spherical 3-degree-of-freedom parallel mechanism. In: 2005 IEEE/RSJ international conference on intelligent robots and systems, 2–6 August 2005. Piscataway, NJ, USA: IEEE, pp. 972–977. Available at: http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1545080.

20.

Gosselin CM and Hamel JF. The agile eye: a high-performance three-degree-of-freedom camera-orienting device. In: Proceedings of the 1994 IEEE international conference on robotics and automation, 8–13 May 1994. Los Alamitos, CA, USA: IEEE Comput. Soc. Press, pp. 781–786. Available at: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=351393.

21.

Parenti-Castelli

Innocenti

. Forward displacement analysis of parallel mechanisms. Closed form solution of PRR-3S and PPR-3S structures. J Mech Des Trans ASME 1992; 114: 68–73.

22.

Bonev

Ryu

. A new approach to orientation workspace analysis of 6-DOF parallel manipulators. Mech Mach Theory 2001; 36: 15–28.

23.

Merlet JP. Singular configurations of parallel manipulators and Grassmann geometry. Int J Robot Res 1989; 8(5): 45–56.

24.

Pendar

Mahnama

Zohoor

. Singularity analysis of parallel manipulators using constraint plane method. Mech Mach Theory 2011; 46: 33–43.

25.

Gosselin

Angeles

. Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Automat 1990; 6: 281–290.

26.

Ben-Horin

Shoham

. Singularity condition of six-degree-of-freedom three-legged parallel robots based on grassmann-cayley algebra. IEEE Trans Robot 2006; 22: 577–590.

27.

Jongwon

. Design and analysis of a redundantly actuated parallel mechanism for rapid machining. IEEE Trans Robot Automat 2001; 17: 423–434.

28.

Chebbi

Affi

Romdhane

. Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot. Mech Mach Theory 2009; 44: 1768–1783.

29.

Briot

Bonev

. Accuracy analysis of 3T1R fully-parallel robots. Mech Mach Theory 2010; 45: 695–706.

30.

Frisoli

. A new screw theory method for the estimation of position accuracy in spatial parallel manipulators with revolute joint clearances. Mech Mach Theory 2011; 46: 1929–1949.

31.

Merlet

. Jacobian, manipulability, condition number, and accuracy of parallel robots. J Mech Des Trans ASME 2006; 128: 199–206.

32.

Meng

Zhang

. Accuracy analysis of parallel manipulators with joint clearance. J Mech Des Trans ASME 2009; 131: 0110131–0110139.

33.

Chang

S-L

Tsai

L-W

. On the redundant-drive backlash-free robotic mechanisms. J Mech Des 1993; 115: 247–254.