Research on the aerodynamic performance and noise reduction design of small unmanned aerial vehicles based on noise source localization

Abstract

This study addresses aerodynamic noise control in small Unmanned Aerial Vehicles (UAVs) by proposing a noise-reduction method based on noise source localization. The flow field is obtained using Large Eddy Simulation (LES), and noise propagation is predicted via the Ffowcs Williams–Hawkings (FW-H) acoustic analogy equation. Aerodynamic noise is then solved using the Hybrid Computational Aeroacoustics (HCAA) method. The synergistic effects of rotational speed and freestream velocity on the rotor flow field and noise are systematically analyzed. Based on noise source distribution characteristics, a novel structure is proposed, consisting of ridge-shaped grooves at 30% chord on the rotor’s upper surface leading edge to divide large-scale separation vortices, and conical protrusions on the blade tip trailing edge to guide vortex separation paths. Numerical results show that the ridge-shaped grooves reduce the peak time-averaged fluctuating acoustic pressure on the upper surface by 50% and attenuate mid-to-high-frequency far-field noise by 6 dB. The conical protrusions reduce the concentrated noise source area at the blade tip by 70%. The optimized design lowers the maximum overall sound pressure level by 3.56 dB at 10 times the radius laterally, with under 1% aerodynamic loss compared to the original model. This study demonstrates that local structural modification based on noise source localization offers an effective pathway for low-noise design of small UAVs.

Keywords

unmanned aerial vehicle rotor hybrid computational aeroacoustics aeroacoustic noise control computational fluid dynamics

Get full access to this article

View all access options for this article.

References

Tian

Shen

. Research on active control technology of rotor [in Chinese]. China Science and Technology Information. 2019; 31(3): 37–44.

Zhao

. Experimental study on aerodynamic noise reduction of helicopter rotor [in Chinese]. In: Proceedings of the 11th National Conference on Aeroelasticity, Kunming, China, August 14, 2009. Nanjing University of Aeronautics and Astronautics.

Tang

Wang

Xie

, et al. Research on wind resistance and noise reduction of multi-rotor UAV [in Chinese]. Audio Eng. 2022; 46(8): 102–105. https://doi.org/10.16311/j.audioe.2022.08.029

Guan

, et al. Noise attenuation of quadrotor using phase synchronization method [J]. Aero Sci Technol 2021; 118: 107018. https://doi.org/10.1016/j.ast.2021.107018

Shao

, et al. Experimental study on noise reduction of multi-rotor by phase synchronization [J]. J Sound Vib 2022; 539: 117199. https://doi.org/10.1016/j.jsv.2022.117199

Jinchao

Yang

Taoyong

, et al. Experimental research of active vibration and noise control of electrically controlled rotor [J]. Chin J Aeronaut. 2021; 34(11): 106–118. https://doi.org/10.1016/j.cja.2020.10.027

Zhang

Wang

, et al. Noise reduction study of UAV rotor with wavy blade tip structure [in Chinese]. J Vib Shock. 2024; 43(22): 135–145. https://doi.org/10.13465/j.cnki.jvs.2024.22.015

Noda

Hoshiba

Komatsuzaki

, et al. Near-and far-field acoustic characteristics and sound source localization performance of low-noise propellers with gapped gurney flap [J]. Drones 2024; 8(6): 265. https://doi.org/10.3390/drones8060265

TY.

Research on noise reduction of UAV propeller based on bionic flow control . Jilin University, 2022. [in Chinese]. Dissertation.

10.

Yang

Liu

, et al. Experimental study on noise reduction of a wavy multi-copter rotor [J]. Appl Acoust 2020; 165: 107311. https://doi.org/10.1016/j.apacoust.2020.107311

11.

. Bionic rotor noise reduction design and experimental research based on CFD. Nanchang Hangkong University, 2022. [in Chinese]. Dissertation.

12.

Wei

Bian

, et al. Noise reduction of UAV using biomimetic propellers with varied morphologies leading-edge serration [J]. Journal of Bionic Engineering 2020; 17: 767–779. https://doi.org/10.1007/s42235-020-0054-z

13.

Liu

Tang

Zhong

, et al. Numerical study on aerodynamic noise control of airfoil based on bionics [in Chinese]. Journal of Nanchang Hangkong University (Natural Science Edition). 2022; 36(3): 111–115. https://doi.org/10.3969/j.issn.2096-8566.2022.03.011

14.

Zhang

Cheng

, et al. Experimental and numerical study on noise reduction of airfoil with the bioinspired ridge-like structure [J]. Appl Acoust 2023; 203: 109190. https://doi.org/10.1016/j.apacoust.2022.109190

15.

Moslem

Masdari

Fedir

, et al. Experimental investigation into the aerodynamic and aeroacoustic performance of bioinspired small-scale propeller planforms [J]. Proc Inst Mech Eng G J Aerosp Eng 2023; 237(1): 75–90. https://doi.org/10.1177/09544100221091322

16.

Wei

. Research on bionic noise reduction of UAV rotor based on owl feather characteristics[in Chinese]. Dissertation. University of Science and Technology of China, 2022.

17.

Deters

Kleinke

Selig

. Static testing of propulsion elements for small multirotor unmanned aerial vehicles[C]//35th AIAA Applied Aerodynamics Conference. Reston: American Institute of Aeronautics and Astronautics, 2017: 3743. https://doi.org/10.2514/6.2017-3743

18.

Jacob

Boudet

Casalino

, et al. A rod-airfoil experiment as a benchmark for broadband noise modeling [J]. Theor Comput Fluid Dynam 2005; 19: 171–196. https://doi.org/10.1007/s00162-004-0108-6

19.

Sun

Zhang

Liu

, et al. Experiment on influence mechanism of rotor flow on blade-vortex interaction noise [in Chinese]. Acta Aeronautica et Astronautica Sinica,. 2026; 47(3): 132182. https://doi.org/10.7527/S1000-6893.2025.32182