Flow investigations of reverse running volute pumps with backward vanes in comparison to forward type turbine vanes

Abstract

The use of centrifugal pumps as turbines in the recent years has come as a boon to small and micro power application given its simplicity and robustness. However, attempts are continuously being made to improve the performance by modifying the geometry, and yet to retain its simpleness. This paper proposes a new design to the impeller of an existing pump with forward-shaped vanes in an unchanged volute that is in complete contrast to the conventional backward vanes. Three methodologies are involved in the analysis starting with classical theory, experiment and simulations. The theory entails the focus on optimizing the nozzle shape of the impeller to reduce viscous and eddies. The forward vane having shorter nozzle length has proved to be more efficient compared to the longer backward vane impeller, with an efficiency increase of nearly 5%. The experimental and CFD analysis to study the internal flow saw similitude in the streamline change in Euler moment. It also showed that there were not only increased viscous effects but also enhanced flow separation in the backward vanes at overload flows. The study also found radial clearance losses to be unacceptable for both the shapes. The overall conclusion was to move ahead with the forward design and convince the industry to adopt them for there have been greater strides in cost-effective manufacturing processes. The paper also recommends more study of intermediate blade angles since there was still persistence of small degree of vorticities in the forward blade nozzle. The optimization of volute-impeller interface along with the influence of non-flow zone would be other areas for future investigation. Synergy of academia and industry is also welcome to lend improved understanding in pumps as turbines and better translation to praxis.

Keywords

Centrifugal pumps diffusers (pumps)turbine blades turbomachinery flow forward impeller shape backward impeller shape fixed volute rotating turbine nozzle flow separation pump as turbine

Get full access to this article

View all access options for this article.

References

Lueneburg

Nelson

Hydraulic power recovery turbines. In: VS

Lobanoff

et al. (eds). Centrifugal pumps – design and application, 2nd ed. Houston: Gulf Publishing Company, 1992, pp. 246–282.

Cohrs D. Untersuchungen an einer mehrstufigen rückwärtslaufenden Kreiselpumpe im Turbinenbetrie. Karlsruhe, Germany: Faragallah WH Verlag und Bildarchiv, 1997, pp.8–41.

Singh

Nestmann

. Internal hydraulic analysis of impeller rounding in centrifugal pumps as turbines. Exp Therm Fluid Sci 2011; 35: 121–134.

Derakhshan

Mohammadi

Nourbakhsh

. Efficiency improvement of centrifugal reverse pumps. J Fluids Eng 2009; 131: 021103–021103.

Yang SS. Theoretical, numerical and experimental research on centrifugal pump as turbine. PhD Thesis, Classified Index: TH311; UDC: 621.671, Jiangsu University, Zhenjiang, China, 2013, pp.72–76.

Patel

Jain

Motwani

et al.

Numerical optimization of guide vanes and reducer in pump running in turbine mode. Procedia Eng 2013; 51: 797–802.

Wang

Kong

Xia

et al.

The method for determining blade inlet angle of special impeller using in turbine mode of centrifugal pump as turbine. Renew Energy 2017; 109: 518–528.

Zhang

. A review of rotating stall in reversible pump turbine. Proc IMechE, Part C: J Mechanical Engineering Science 2017; 231: 1181–1204.

Barrio

Fernández

Blanco

et al.

Performance characteristics and internal flow patterns in a reverse-running pump–turbine. Proc IMechE, Part C: J Mechanical Engineering Science 2011; 226: 695–718.

10.

Ardizzon

Pavesi

. Optimum incidence angle in centrifugal pumps and radial inflow turbines. Proc IMechE, Part A: J Power and Energy 1998; 212: 97–107.

11.

Heo

Kim

Seo

et al.

Aerodynamic and aeroacoustic optimization for design of a forward-curved blades centrifugal fan. Proc IMechE, Part A: J Power and Energy 2016; 230: 154–174.

12.

Akbari

Montazerin

Akbarizadeh

. Stereoscopic particle image velocimetry of the flow field in the rotor exit region of a forward-blade centrifugal turbomachine. Proc IMechE, Part A: J Power and Energy 2011; 226: 163–181.

13.

Yang

Kong

et al.

Numerical simulation and performance experiment on pump and pump as turbine. J Xian Jiaotong Univ 2012; 46: 36–41.

14.

Derakhshan

Nourbakhsh

. Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation. Exp Therm Fluid Sci 2008; 32: 1620–1627.

15.

Ansys CFX. Help Navigator. Release 12.0 CFX-Solver modeling guide. https://users.encs.concordia.ca/home/m/m_mamu/ANSYS%20CFX%20documentation/cfx_mod.pdf.

16.

Wang

. Computational fluid dynamics analysis – CFD principles and application, Beijing: Tsinghua University Press, 2004.

17.

Spence

Amaral-Teixeira

. Investigation into pressure pulsations in a centrifugal pump using numerical methods supported by industrial tests. J Computer Fluids 2008; 37: 690–704.

18.

Yang SS, Kong FY and Shao F. Numerical simulation and comparison of pump and pump as turbine. In: ASME fluids engineering summer meeting, Montreal, Canada, 2010, pp.1–10. ASME Press.

19.

Pfleiderer and Petermann. Strömungsmaschinen. 4th ed 1972, pp. 57–59.