Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin
Restricted accessResearch articleFirst published online August, 2023
Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin
The application of latent heat thermal energy storage (LHTES) technology in solar energy utilization is greatly restricted by the low thermal conductivity of phase change material (PCM). This paper proposed a non-uniform arrangement of a longitudinal fin in a typical LHTES unit to improve the melting performance of PCM. Water is used as the heat transfer fluid (HTF) and paraffin (RT35) is selected as the PCM. A three-dimensional computational model is built to simulate the melting process of PCM, and its result is verified by experimental data. Firstly, the melting performance of PCM in the LHTES unit with four kinds of fin arrangements is comparatively studied, and its heat transfer mechanism is characterized via the maximum velocity of liquid PCM. In addition, the influences of HTF inlet temperature and flow rate, as well as heat transfer tube material on the complete melting time of three typical fin arrangements are also investigated. The results implied that the complete melting time of the non-uniform arrangement of the longitudinal fin reduces by 30.91% relative to the conventional longitudinal fin (Case 2). The results also revealed that the melting rate of PCM is related not only to the intensity of natural convection but also to the distribution of natural convection in the whole melting process.
UNFCCC. Adoption of the Paris agreement. Bonn, Germany: UNFCCC, 2015.
2.
HeY-LWangKQiuY, et al.Review of the solar flux distribution in concentrated solar power: non-uniform features, challenges, and solutions. Appl Therm Eng2019; 149: 448–474.
3.
ReddyKSMudgalVMallickTK. Review of latent heat thermal energy storage for improved material stability and effective load management. J Energy Storage2018; 15: 205–227.
4.
MahdiJMLohrasbiSNsoforEC. Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: a review. Int J Heat Mass Transf2019; 137: 630–649.
5.
YangJYangLXuC, et al.Experimental study on enhancement of thermal energy storage with phase-change material. Appl Energy2016; 169: 164–176.
6.
LinJZhaoQHuangH, et al.Applications of low-temperature thermochemical energy storage systems for salt hydrates based on material classification: a review. Sol Energy2021; 214: 149–178.
7.
GautamASainiRP. A review on sensible heat based packed bed solar thermal energy storage system for low temperature applications. Sol Energy2020; 207: 937–956.
8.
LugololeRMawireAOkelloD, et al.Experimental analyses of sensible heat thermal energy storage systems during discharging. Sustain Energy Technol Assess2018; 35(Oct.): 117–130.
9.
LuBZhangYSunD, et al.Experimental investigation on thermal properties of paraffin/expanded graphite composite material for low temperature thermal energy storage. Renew Energy2021; 178: 669–678.
10.
LuBZhangYZhangJY, et al.Preparation, optimization and thermal characterization of paraffin/nano-Fe3O4 composite phase change material for solar thermal energy storage. J Energy Storage2022; 46: 103928.
11.
WangYWangLChenH, et al.Numerical study on thermal performance characteristics of a cascaded latent heat storage unit. Proc Inst Mech Eng, A: J Power Energy Syst2016; 230: 126–137.
12.
HosseinzadehKGanjiDOmmiF. Effect of SiO2 super-hydrophobic coating and self-rewetting fluid on two phase closed thermosyphon heat transfer characteristics: an experimental and numerical study. J Mol Liq2020; 315: 113748.
13.
Erfani MoghaddamMAHassani Soukht AbandaniMRHosseinzadehKH, et al.Metal foam and fin implementation into a triple concentric tube heat exchanger over melting evolution. Theor App Mech Lett2022; 12: 100332.
14.
HosseinzadehKMoghaddamMEAsadiA, et al.Effect of internal fins along with hybrid nano-particles on solid process in star shape triplex latent heat thermal energy storage system by numerical simulation. Renew Energy2020; 154: 497–507.
15.
HosseinzadehKMogharrebiARAsadiA, et al.Effect of fin and hybrid nano-particles on solid process in hexagonal triplex latent heat thermal energy storage system. J Mol Liq2020; 300: 112347.
16.
SciacovelliAGagliardiFVerdaV. Maximization of performance of a PCM latent heat storage system with innovative fins. Appl Energy2015; 137: 707–715.
17.
YangXLuZBaiQ, et al.Thermal performance of a shell-and-tube latent heat thermal energy storage unit: role of annular fins. Appl Energy2017; 202: 558–570.
18.
KalapalaLKrishna DevanuriJ. Effect of orientation on thermal performance of a latent heat storage system equipped with annular fins - an experimental and numerical investigation. Appl Therm Eng2021; 183: 116244.
19.
RathodMKBanerjeeJ. Thermal performance enhancement of shell and tube latent heat storage unit using longitudinal fins. Appl Therm Eng2015; 75: 1084–1092.
20.
HosseiniMJRanjbarAARahimiM, et al.Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems. Energy Build2015; 99: 263–272.
21.
ArshadAAliHMAliM, et al.Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: effect of pin thickness and PCM volume fraction. Appl Therm Eng2017; 112: 143–155.
22.
AlyKAEl-LathyARFouadMA. Enhancement of solidification rate of latent heat thermal energy storage using corrugated fins. J Energy Storage2019; 24: 100785.
23.
LuBZhangYSunD, et al.Experimental investigation on thermal behavior of paraffin in a vertical shell and spiral fin tube latent heat thermal energy storage unit. Appl Therm Eng2021; 187: 116575.
24.
ZhangCBLiJChenYP. Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins. Appl Energy2020; 259: 114102.
25.
WuLZhangXLiuX. Numerical analysis and improvement of the thermal performance in a latent heat thermal energy storage device with spiderweb-like fins. J Energy Storage2020; 32: 101768.
26.
HosseinzadehKHErfani MoghaddamMAAsadiA, et al.Effect of two different fins (longitudinal-tree like) and hybrid nano-particles (MoS2-TiO2) on solidification process in triplex latent heat thermal energy storage system. Alex Eng J2021; 60: 1967–1979.
27.
YangXGuoJYangB, et al.Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit. Appl Energy2020; 259: 115772.
28.
DengSNieCJiangH, et al.Evaluation and optimization of thermal performance for a finned double tube latent heat thermal energy storage. Int J Heat Mass Transf2019; 130: 532–544.
29.
MahdiJMLohrasbiSGanjiDD, et al.Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger. Int J Heat Mass Transf2018; 124: 663–676.
30.
AbdulateefAMMatSAbdulateefJ, et al.Geometric and design parameters of fins employed for enhancing thermal energy storage systems: a review. Renew Sustain Energy Rev2018; 82: 1620–1635.
31.
DasNTakataYKohnoM, et al.Effect of carbon nano inclusion dimensionality on the melting of phase change nanocomposites in vertical shelltube thermal energy storage unit. Int J Heat Mass Transf2017; 113: 423–431.
32.
IsmailKARAlvesCLFModestoMS. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder. Appl Therm Eng2001; 21: 53–77.
33.
ArdahaieSSHosseiniMJRanjbarAA, et al.Energy storage in latent heat storage of a solar thermal system using a novel flat spiral tube heat exchanger. Appl Therm Eng2019; 159: 113900.
34.
Al-AbidiAAMatSSopianK, et al.Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins. Int J Heat Mass Transf2013; 61: 684–695.
35.
WangPYaoHLanZ, et al.Numerical investigation of PCM melting process in sleeve tube with internal fins. Energy Convers Manag2016; 110: 428–435.
36.
JiBZhangQCaoJ, et al.Non-contact detection of delamination in stainless steel/carbon steel composites with laser ultrasonic. Optik2020; 226: 165893.
37.
VollerVRPrakashC. A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int J Heat Mass Transf1987; 30: 1709–1719.
38.
JiCQinZDubeyS, et al.Simulation on PCM melting enhancement with double-fin length arrangements in a rectangular enclosure induced by natural convection. Int J Heat Mass Transf2018; 127: 255–265.
