Active bearing force reduction in non-commutated linear actuators

Abstract

Planar linear magnetic actuators are used in a wide range of industrial applications. Permanent magnet movers in particular allow high axial thrust forces, which result in considerable destabilizing stiffness in the direction perpendicular to the direction of motion. These forces, which can reduce bearing lifetime significantly, must therefore be stabilized with linear bearings.

This paper introduces an integrated active bearing-force compensation concept that minimizes the forces acting on the mechanical bearings. The potential and limits of bearing force compensation are analyzed based on a short-stroke linear actuator with an E-shaped stator. Further, the extent to which bearing forces can be compensated for, even with simple actuator layouts, is described. Particularly in linear oscillating drives, such compensation can (i) significantly reduce wear and thus improve lifetime and (ii) reduce the size of mechanical bearings.

Measurements of a prototype system confirm the simulated results.

Keywords

Linear actuators bearing force reduction normal attractive force smart machines

Get full access to this article

View all access options for this article.

References

Izumi

Ibuki

Yamashita

. High-efficient linear oscillatory actuator drive systems optimized current waveform. In: Power conversion conference, Nagoya, 2007, pp.925–930. DOI:10.1109/PCCON.2007.373077 .

Haiwei

Jianguo

Zhu

Zhiwei

Lin

. A miniature short stroke linear actuator: design and analysis. IEEE Trans Magn 2008; 44(4): 497–504. DOI:10.1109/TMAG.2008.915459.

Bianchi

Bolognani

Corte

. Tubular linear permanent magnet motors: an overall comparison. IEEE Trans Ind Appl 2003; 39(2): 466–475. DOI:10.1109/TIA.2003.809444 .

Zhu

Chen

Howe

. Electromagnetic modeling of a novel linear oscillating actuator. IEEE Trans Magn 2008; 44(11): 3855–3858. DOI:10.1109/TMAG.2008.2001323 .

Profumo

Tenconi

Gianolio

PM linear synchronous motors normal force calculation. In: International conference on electric machines and drives, 1999, pp.116–118. DOI:10.1109/IEMDC.1999.769045.

Profumo

Tenconi

Gianolio

. Design and realization of a PM linear synchronous motor with a very high thrust/normal force ratio. In: Industry applications conference. thirty-sixth ias annual meeting. Conference record of the 2001 IEEE, volume 3, 2001, pp.1984–1988. DOI:10.1109/IAS.2001.955900 .

Qinfen

Chuanying

Cheng

Xinmin

Zhang

. Comparative investigation of single-sided and double-sided permanent magnet linear motor. In: 15th international conference on electrical machines and systems (ICEMS), 2012, pp.1–5.

Paulides

JJH

Janssen

JLG

Lomonova

. Bearing lifetime of linear PM machines. In: IEEE Energy Conversion Congress and Exposition. ECCE 2009., 2009, pp.1083–1090.

Woo-Yeon

Kim

Jong-Min

Lee

Seung-Jong

Kim

. Rolling motion control of a levitated mover in a permanent-magnet-type bearingless linear motor. IEEE Trans Magn 2010; 46(6): 2482–2485.

10.

Nan-Chyuan

Tsai

Chao-Wen

Chiang

. Design and analysis of magnetically-drive actuator applied for linear compressor. Mechatronics 2010; 20(5): 596–603.

11.

Nan-Chyuan

Tsai

Chao-Wen

Chiang

. High-frequency linear compressor and lateral position regulation. IEEE Trans Control Syst Technol 2012; 20(1): 127–138.

12.

Silber

Amrhein

. Force and torque model for bearingless pm motors. In: Proceedings of the international power electronics conference (IPEC), volume 1, Tokyo, 2000.

13.

Poltschak

. Active reduction of bearing forces for short stroke linear actuators. In: ISMB14, 14th international symposium on magnetic bearings, Linz, Austria, 11–14 August, 2014, pp.401–406.