Interpenetrating polymer networks (IPNs) of poly[2-hydroxyethylmethacrylate] and uralkyd prepolymer were synthesized using benzoyl peroxide as initiator, polyethylene glycol as chain extender, and N,N-methylene bis acrylamide as crosslinker by sequential polymerization method. The concentration of uralkyd (UA) prepolymer and poly[2-hydroxyethylmethacrylate] (PHEMA) were varied and their effects on chemical, mechanical, thermal, and morphological properties of IPNs were investigated. The IPNs glass-transition temperatures increase with increasing PHEMA concentrations. Tensile strength, and shore A hardness increases with increasing concentration of PHEMA while sacrificing percent elongation. Almost all IPNs have shown similar chemical resistance irrespective of composition. Thermo gravimetric analysis (TGA) indicated that increase in PHEMA concentration increases thermal stability of IPNs. Morphological analysis reveals that IPNs reveals heterogeneous and compact morphologies with distinct microphase separation.
YangL.T., ZhaoC.S., DaiC.L., FuL.Y., and LinS.Q.Thermal and Mechanical Properties of Polyurethane Rigid Foam Based on Epoxidized Soyabean OilJ. Polym. Environ., 20 (1), (2012), 230–236.
2.
PetrovićZ.S., YangL., ZlatanićA., ZhangW., and JavniI.Network structure and properties of polyurethanes from soybean oil. J. Appl. Polym. Sci., 105, (2007), 717–2727.
3.
RashmiB.J., RusuD., PrashanthaK., LacrampeM.-F., and KrawczakP.Development of water blown thermoplastic polyurethane foams using bio derived chain extender, J. Appl. Polym. Sci., 128(1), (2013), 292–303.
AjithkumarS., PatelN.K., and KansaraS.S.Sorption and diffusion of organic solvents through interpenetrating polymer networks (IPNs) based on polyurethane and unsaturated polyester. Euro. Polym. J., 36(11), (2000), 2387–2393.
6.
ChenS., WangQ., WangT, and PeiX.Preparation, damping and thermal properties of potassium titanate whiskers filled castor oil-based polyurethane/epoxy interpenetrating polymer network composites. Materials & Design, 32(2), (2011), 803–807.
7.
AthawaleV., and RautS.Transparent semi- and full-interpenetrating polymer networks based on uralkyd-polymethyl methacrylate. Phys. Chem. Chem. Phys., 2, (2000), 1249–1254.
8.
AthawaleV., and RautS. (2001), New interpenetrating polymer networks based on uralkyd-poly(butyl methacrylate)Polym. Intl, 50(11), 1234–1240.
9.
AthawaleV., and KolekarS.Uralkyd and poly (butyl methacrylate) interpenetrating polymer networks. J. Appl. Polym. Sci., 75, (2000), 825.
10.
HuangJ., ZhaoD., DangariaS.J., LuanX., DiekwischT.G.H., JiangG., SaizE., LiuG., and TomsiaA.P.Combinatorial design of hydrolytically degradable, bone-like biocomposites based on PHEMA and hydroxyapatite. Polymer, 54(2), (2013), 909–919.
ChirilaT. V.Development and clinical assessment of an artificial cornea. Biomaterials, 22(24), (2001), 3311–3317.
13.
HandanY., KevserÖ., ErhanP. K., AdilD, and ConcanavalinA.J Macromol. Sci.: Part A, Pure App. Chem., 46(2), (2008), 163–169.
14.
BajpaiA. K., and ShrivastavaM.Enhanced water sorption of a semi-interpenetrating polymer network (IPN) of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(ethylene glycol) (PEG)J Macromol. Sci.: Part A, Pure App. Chem., 39(7), (2002), 667–692.
15.
BajpaiA. K., and BhanuS.Controlled release of a digestive enzyme from a swellable semi-interpenetrating polymer network (IPN). J Macromol. Sci.: Part A, Pure App. Chem., 40(3), (2003), 265–292.
16.
PrashanthaK., PaiK.V.K,. SherigaraB. S., and PrasannakumarS.Interpenetrating polymer networks of Modified Castor Oil Polyurethane and Poly(2-Hydroxy ethylmethacrylate): Synthesis, chemical, mechanical and thermal properties. Bull. Mater. Sci., 24(5), (2001), 535–538.
17.
PrashanthaK., PaiK.V.K., and SherigaraB.S.Electrochemical synthesis of poly(2-hydroxyethylmethacrylate) mediated by titanium(III-hydroxylamine redox systemJ. Appl. Polym. Sci, 84, (2002), 983–992
18.
PrashanthaK., PaiK.V.K., and SherigaraB.S.Studies on the miscibility of poly(2-hydroxyethyl methacrylate) and poly(ethylene oxide) blends. J Macromol. Sci.: Part A, Pure App. Chem.45(3), (2008), 238–241.
19.
PrashanthaK., RashmiB.J., and LeeJ.H.Processing and characterization of carbon nanotube filled poly(2-hydroxyethylmethacrylate) nanocomposites. High Perform. Polym., 25(1), (2013), 97–103.
20.
SandlarS.R, and KaroW., Polymer synthesis-II, Academic PressNew York, 2, (1992).
21.
MeakinJ. R., HukinsD. W. L., ImrieC. T., AspdenR. M.Thermal analysis of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogelsJ. Mater. Sci. Mater. Med14, (2003), 9–15.
22.
KarabanovaL. V., SergeevaL. M., SvyatynaA. V., YakushevP. N., EgorovaL. M., RyzhovV. A., and BershteinV. A.Heterogeneity of glass transition dynamics in polyurethane-poly(2-hydroxyethyl methacrylate) semi-interpenetrating polymer networks. J. Polym. Sci. Part B: Polym. Phys., 45, (2007), 963–975.
