Optimizing the Thickness of Piezoceramic Actuators for Bending Vibration of Planar Structures

Abstract

An analytical approach is proposed to optimize the thickness of piezoceramic (PZT) actuators bonded on structures for active shape, noise, or vibration control. The optimal thickness corresponds to maximal mechanical coupling between the PZT actuator and the substrate. The analysis is carried out for a planar geometry, considering a square simply supported flexural plate with a square and a centered PZT actuator bonded either in symmetric or asymmetric configuration. Optimal thicknesses obtained from explicit analytical expressions are compared with finite element (FE) results for various substrate thicknesses and for various values of actuator coverage ratio. Static and dynamic strain profiles through the thickness of the plate—actuator system are plotted. Laboratory experiments are carried out on aluminum and steel plates with free and clamped boundary conditions to verify the analytical and FE predictions in terms of optimal PZT actuator thickness.

Keywords

piezoelectric actuator piezoelectric thickness optimization piezoelectric mechanical coupling smart structures active vibration control finite element model.

References

Charette, F. , Guigou, C. , Berry, A. and Plantier, G. 1994. ``Asymmetric Actuation and Sensing of a Beam using Piezoelectric Materials,'' J. Acoust. Soc. Am., 96(4): 2272—2283.

Cotoni, V. , Côté, F. and Masson, P. 2006. ``A Finite Element for Piezoelectric Multilayered Plates: Combined Higher-order and Piecewise Linear C0 Formulation ,'' J. Intel. Mat. Syst. and Structures, 17(2):155—166.

Crawley, E.F. and de Luis, J. 1987. ``Use of Piezoelectric Actuators as Elements of Intelligent Structures,'' AIAA Journal, 25(10): 1373—1385.

Cunningham, M.J. , Jenkins, D.F.L. and Bakush, M.M. 1997. ``Experimental Investigation of Optimum Thickness of a Piezoelectric Element for Cantilever Actuation,'' IEEE Proc.-Sci. Mes. Technol., 144(1): 45—48.

Dimitriadis, E.K. , Fuller, C.R. and Rogers, C.A. 1991. ``Piezoelectric Actuators for Distributed Vibration Excitation of Thin Plates,'' ASME J. Vib. and Acoust., 113(1): 100—107.

Hansen, C.H. and Snyder, S.D. 1997. ``Active Control of Noise and Vibration,'' E&FN Spon, London.

Heyliger, P. and Saravanos, D. 1995. ``Exact Free-vibration Analysis of Laminated Plates with Embedded Piezoelectric Layers,'' J. Acoust. Soc. Am. , 98(3): 1547—1557.

Kim, S.J. and Jones, J.D. 1991. ``Optimal Design of Piezoactuators for Active Noise and Vibration Control,'' AIAA Journal, 29(12): 2047—2053.

Kim, S.J. and Jones, J.D. 1992. ``A Study of Piezoelectric Actuators for Active Noise and Vibration Control,'' Report No. 1961-1 HL 92-32, Purdue University, IN.

10.

Kim, S.J. and Jones, J.D. 1995. ``Influence of Piezo-actuator Thickness on the Active Vibration Control of a Cantilever Beam,'' J. Intel. Mat. Syst. and Structures, 6(5): 610—623.

11.

Leeks, T.J. and Weisshaar, T.A. 1995. ``Optimization of Asymmetric Actuators for Maximum Panel Deflection Control,'' Proc. SPIE Smart Structures and Materials , 2443: 62—74.

12.

Leissa, A.W. 1969. ``Vibration of Plates'', edited by Acoustical Society of America 1993.

13.

Rivory, J.F. , Hansen, C.H. and Pan, J. 1994. ``Further Studies of the Dynamic Response of a Simply Supported Beam Excited by a Pair of Out of Phase Piezoelectric Actuators ,'' J. Intel. Mat. Syst. and Structures, 5(5): 654—664.

14.

Sunar, M. , Hyder, S.J. and Yilbas, B.S. 2001. ``Robust Design of Piezoelectric Actuators for Structural Control,'' Comput. Methods Appl. Mech. Eng., 190(46—47): 6257—6270.

15.

Wolf, K. , Frese, S. , Hagedan, P. and Seemann, W. 1997. ``Thickness Optimization of Piezoceramic Transducers for Energy Transfer,'' In Proceedings of ASME Design Engineering Technical Conference, September 14—17, 1997 .

16.

Wu, T. , Ro, P.I. , Kingon, A.I. and Mulling, J.F. 2003. ``Piezoelectric Resonating Structures for Microelectronic Cooling'', Smart Mater. Struct., 12(2):181—187.