Finite-Element-Based Nonlinear Modal Reduction of a Rotating Beam with Large-Amplitude Motion

Abstract

A nonlinear one-dimensional finite-element model representing the axial and transverse motions of a cantilevered rotating beam is reduced to a single nonlinear normal mode using invariant manifold techniques. This system is an idealized representation for large-amplitude vibrations of a rotorcraft blade. Although this model is relatively simple, it possesses the essential nonlinear coupling effects between the axial and transverse degrees of freedom. The nature of this coupling leads to the fact that we must use many degrees of freedom, whether based on finite elements or modal expansions, in order to accurately represent the beam vibrations. In this work, the slow modal convergence problem is overcome by nonlinear modal reduction that makes use of invariant manifold based nonlinear modes. This reduction procedure generates a single-degree-of-freedom reduced-order model that systematically accounts for the dynamics of all the linear modes, or finite elements, considered in the original model. The approach is used to study the dynamic characteristics of the finite-element model over a wide range of vibration amplitudes. Using extensive simulations, it is shown that the response of the reduced-order model is nearly identical to a reference system which is based on a large-scale representation of the finite-element model, and to a reduced-order Rayleigh-Ritz model. All of the procedures presented here have been computationally automated. Hence, in this study we demonstrate that it is feasible and practical to interface nonlinear finite-element methods with nonlinear modal reduction.

Keywords

Nonlinear normal mode nonlinear modal reduction finite element rotating beam

References

Anderson, G. L. , 1975, “On the extensional and flexural vibrations of rotating bars,” International Journal of Non-Linear Mechanics 10, 223-236.

Bauchau, O. A. and Bottasso, C. , 1994, “Space-time perturbation modes for non-linear dynamic analysis of beams,” Nonlinear Dynamics 6(1), 21-35.

Bauchau, O. A. and Hong, C. H. , 1987, “Finite element approach to rotor blade modelling,” Journal of the American Helicopter Society 32(1), 60-67.

Bauchau, O. A. and Hong, C. H. , 1988, “Nonlinear response and stability analysis of beams using finite elements in time,” AIAA Journal 26(9), 1135-1142.

Bauchau, O. A. and Liu, S. P. , 1989, “Finite element based modal analysis of helicopter rotor blades,” Vertica 13(2), 197-206.

Carr, J. , 1981, Applications of Centre Manifold Theory, Springer-Verlag, Berlin.

Crespo Da Silva, M. R. M. , 1997, “General reduced order analytical model for nonlinear dynamic analyses of beams with or without lumped masses,” Applied Mechanics Reviews 50(11), part 2, S28-S35.

Crespo Da Silva, M. R. M. , 1998, “A reduced-order analytical model for the nonlinear dynamics of a class of flexible multi-beam structures,” International Journal of Solids and Structures 35(25), 3299-3315.

Du, H. , Lim, M. K. , and Liew, K. M. , 1994, “A power series solution for vibration of a rotating Timoshenko beam,” Journal of Sound and Vibration 175(4), 505-523.

10.

Hodges, D. H. , Hopkins, A. S. , and Kunz, D. L. , 1989, “Analysis of structures with rotating, flexible substructures applied to rotorcraft aeroelasticity,” AIAA Journal 27(2), 192-200.

11.

Kosmatka, J. B. and Friedmann, P. P. , 1989, “Vibration analysis of composite turbopropellers using a nonlinear beam-type finite-element approach,” AIAA Journal 27(11), 1606-1614.

12.

Meirovitch, L. , 1980, Computational Methods in Structural Dynamics, Sijthoff & Noordhoff, Groningen.

13.

Noor, A. K. , 1981, “Recent advances in reduction methods for nonlinear problems,” Computers & Structures 13, 31-44.

14.

Noor, A. K. and Peters, J. M. , 1980, “Reduced basis technique for nonlinear analysis of structures,” AIAA Journal 18(4), 455-462.

15.

Pesheck, E. , Pierre, C. , and Shaw, S. W. , 2001, “Accurate reduced order models for a simple rotor blade model using nonlinear normal modes,” Mathematical and Computer Modelling 33, 1085-1097.

16.

Pesheck, E. , Pierre, C. , and Shaw, S. W. , 2002a, “Modal reduction of a nonlinear rotating beam through nonlinear normal modes,” ASME Journal of Vibration and Acoustics, 124, 229-236.

17.

Pesheck, E. , Pierre, C. , and Shaw, S. W. , 2002b, “A new Galerkin-based approach for accurate nonlinear normal modes through invariant manifolds,” Journal of Sound and Vibration, 249, 971-993.

18.

Reddy, J. N. , 1986, Applied Functional Analysis and Variational Methods in Engineering, McGraw-Hill, New York.

19.

Reddy, J. N. , 1993, An Introduction to The Finite Element Method, McGraw-Hill, New York.

20.

Shaw, S. W. and Pierre, C. , 1993, “Normal modes for non-linear vibratory systems,” Journal of Sound and Vibration 164(1), 85-124.

21.

Shaw, S. W. and Pierre, C. , 1994, “Normal modes of vibration for non-linear continuous systems,” Journal of Sound and Vibration 169(3), 319-347.

22.

Shaw, S. W. , Pierre, C. , and Pesheck, E. , 1999, “Modal analysis-based reduced-order models for nonlinear structures-an invariant manifold approach,” The Shock and Vibration Digest 31(1), 3-16.

23.

Simo, J. C. and Vu-Quoc, L. , 1988, “On the dynamics in space of rods undergoing large motions - a geometrically exact approach,” Computer Methods in Applied Mechanics and Engineering, 66, 125-161.

24.

Wright, A. D. , Smith, C. E. , Thresher, R. W. , and Wang, J. L. C. , 1982, “Vibration modes of centrifugally stiffened beams,” Journal of Applied Mechanics 49, 197-202.