Development of an apparatus to evaluate oil deterioration and oil life based on a new principle for environmental conservation

Abstract

From the viewpoint of environmental conservation, a reduction in waste is required. The development of long-life oil has been energetically proposed as a method to reduce waste in lubricants. However, it would be economical and effective for users to be able to know the precise deterioration status of lubricants so that the materials could be completely used up before disposal. The development of super long-life oils has been advanced in automotive engine oils, which hold a large proportion of the lubricant market. Automotive manufacturers recommend that automotive engine oils be changed periodically or at a set mileage because there are a number of engine oils in the market and they are used for individual automobiles. However, the reality is that this oil-change interval depends on the end users’ judgement. Thus, engine oils are often changed needlessly and improperly. Therefore, the authors aimed to simply and precisely evaluate the oil deterioration status with a very small amount of engine oil to ease the burden on users. Generally, in addition to deterioration and decomposition of engine oil itself, there is contamination of substances such as unburned fuel and soot generated from the combustion. In either case, the change of electrical property due to increase of polar substance in engine oil can be predicted. Thus, the relationship between the measured frequency and the dielectric characteristics with a very small amount of oil was examined using a comb-shaped electrode. As a result, it was found that the permittivity was increased as the oil was deteriorated and the frequency characteristics differed between the oils used in a diesel engine and a gasoline engine. In order to investigate the status of basicity component, which is added in engine oil to protect it from a bad influence due to the formation and contamination of acidic compound, the acidity of the engine oils was directly measured with acidic ion sensitivity sensor for pH measurement (pH-ISFET). It was found that the acidity clearly increases as the oil is deteriorated. Also, it is possible to simply and accurately evaluate the engine oil deterioration status using a very small amount of oil by measuring its permittivity frequency characteristics with a comb-shaped electrode and its acidity with pH-ISFET.

Keywords

engine oil oil life oil deterioration contamination acidity dielectric characteristics

Get full access to this article

View all access options for this article.

References

Kajdas

Harvey

S. S. K.

Wiluse

Encyclopedia of tribology, 1990 (Elsevier, Amsterdam).

Yaguchi, A., Inoue, K. Development and field test performance of fuel efficient SAE 5W-20 oils. SAE paper 952341, 1995.

Wang

S. S.

Lee

H. S.

Smolenski

D. J.

The development of in-situ electrochemical oil-condition sensors. Sens. Actuators, 1994, B17, 179–179.

Smolenski, D. J., Schwartz, S. E. Development of an automatic engine oil-change indicator system. SAE paper 870403, 1987.

Irion, E., Land, K., Guriter, T., Klein, M. Oil-quality prediction and oil-level detection with the TEMIC QLT-sensor leads to variable maintenance interval. SAE paper 970847, 1997.

Basu, A., Berndorfer, A., Buelna, C., Campbell, J., Ismail, K., Lin, Y., Rodriguez, L., Wang, S. S. Smart sensing’ of oil degradation and oil level measurements in gasoline engines. SAE paper 2000-01-1366, 2000.

Ito, K., Kamano, H. Development of phosphorus-free engine oil. In Proceedings of the World Tribology Congress, Kyoto, Japan, 6–11 September 2009, p. 292.

JASO M336:1998 Automobile diesel engine oils – Detergency test procedure.

JASO M355:2008 Automobile diesel engine oils.

10.

Ulrich

Petersson

Sundgren

Bjorefors

Krantz-Rulcker

Simultaneous estimation of soot and diesel contamination in engine oil using electrochemical impedance spectroscopy. Sens. Actuators, 2007, B127, 613–618, Elsevier.

11.

Kittlesen

G. P.

White

H. S.

Wrighton

M. S. J.

Chemical derivatization of microelectrode arrays by oxidation of pyrrole and N-methylpyrrole: fabrication of molecule-based electronic devices. Am. Chem. Soc., 1984, 106, 7389–7396.

12.

Thacjeray

J. W.

White

H. S.

Wrighton

M. S. J.

Poly(3-methylthiophene)-coated electrodes: optical and electrical properties as a function of redox potential and amplification of electrical and chemical signals using poly(3-methylthiophene)-based microelectrochemical transistors. Phys. Chem., 1985, 89, 5133–5140.

13.

Izutsu

Nakayama

Hiraoka

Use of pH-sensitive ISFETs as sensors for pH in nonaqueous solutions and for proton solvation. Chem. Lett., 1993, 22, 1843–1846.

14.

Ito

Long-term drift mechanism of Ta2O5 gate pH-ISFETs. Sens. Actuators, 2000, B64, 152–155, Elsevier.

15.

Mussini

Covington

A. K.

Longhi

Rondinini

Criteria for standardization of pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities. Pure Appl. Chem., 1985, 57, 865–876.

16.

Rondinini

Mussini

P. R.

Mussini

Reference value standards and primary standards for pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities. Pure Appl. Chem., 1987, 59, 1549–1560.