A study on the stability performance of noncircular lobed journal bearings with micropolar lubricant

Abstract

In this paper, steady-state and stability performance characteristics of circular and noncircular two-, three-, and four-lobe journal bearings with micropolar fluids are presented. For this purpose, lubricating oil containing additives and contaminants is modeled as micropolar fluid. The modified Reynolds equation in dynamical state is obtained using the micropolar lubrication theory, and it is solved by finite element method. The bearing performance characteristics in terms of load carrying capacity, whirl frequency ratio, and critical mass parameter of journal are determined for different values of design parameters such as eccentricity and aspect ratio, preload factor, and micropolarity characteristics of lubricant in terms of material characteristic length and coupling number. Results show that in the case of noncircular bearings, the critical mass to load carrying capacity ratio decreases with increasing of preload factor, so for a constant vertical external load, the stability performance of rotating system can be improved by replacing the circular journal bearing with similar noncircular types. The results compared with Newtonian fluids indicate that micropolar lubricant exhibits better steady-state and dynamic performance. Also, results reveal that upgrading the micropolarity characteristics of lubricant causes increase in critical mass, load carrying capacity but decrease in whirl frequency ratio. It is also observed that the effect of micropolar fluids is more pronounced at high coupling numbers.

Keywords

Hydrodynamic lubrication micropolar fluid noncircular lobed journal bearing stability analysis finite element method

Get full access to this article

View all access options for this article.

References

Eringen

. Theory of micropolar fluids. J Appl Math Mech 1966; 16: 1–18.

Allen

Kline

. Lubrication theory for micropolar fluids. J Appl Mech 1971; 23: 646–650.

Prakash

Sinha

. Lubrication theory of micropolar fluid and its application to a journal bearing. Int J Eng Sci 1975; 13: 217–232.

Khonsari

Brewe

. Effect of viscous dissipation on the lubrication characteristic of micropolar fluids. Acta Mech 1994; 68: 57–68.

Khonsari

Brewe

. On the performance of finite journal bearing lubricated with micropolar fluids. Tribol Trans 1989; 32: 155–160.

Das

Guha

Chattopadhyay

. Linear stability analysis of hydrodynamic journal bearings under micropolar lubrication. Tribol Int 2005; 38: 500–507.

Wang

Zhu

. On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids. Sci China Ser G: Phys Mech Astron 2004; 47: 45–50.

Prabhakaran Nair

Sukumaran Nair

Jayadas

. Static and dynamic of elasto-hydrodynamic elliptical journal bearing with micropolar lubricant. Tribol Int 2007; 40: 297–305.

Sharma

Rattan

. Micropolar lubricant effects on the performance of a two lobe bearing with pressure dam. Int J Eng Sci Technol 2010; 2: 5637–5646.

10.

Naduvinamani

Kadadi

. Effect of viscosity variation on the micropolar fluid squeeze film lubrication of a short journal bearing. J Adv Tribol 2013; 1: 1–7.

11.

Kumar V and Chattopadhyay AK. Dynamic analysis including stability of flexibly supported narrow hydrodynamic journal bearings with micropolar lubricant. In: Proceedings of the 1st international and 16th national conference on machines and mechanisms, IIT Roorkee, India, 18–20 December 2013.

12.

Dhawan

Verma

. Analyzing micropolar lubrication in noncircular hybrid journal bearings. Tribol Trans 2014; 57: 182–189.

13.

Rahmatabadi

Zare Mehrjardi

Fazel

. Performance analysis of micropolar lubricated journal bearings using GDQ method. Tribol Int 2010; 43: 2000–2009.

14.

Rahmatabadi

Nekoeimehr

Rashidi

. Effects of bearing orientation on the static performance of micropolar lubricated lobe bearings. Proc IMechE, Part J: J Engineering Tribology 2012; 226: 3–13.

15.

Rahmatabadi

Nekoeimehr

Rashidi

. Micropolar lubricant effects on the performance of noncircular lobed bearings. Tribol Int 2010; 43: 404–413.

16.

Rahmatabadi

Rashidi

. Effect of mount angle on static and dynamic characteristics of gas-lubricated, noncircular journal bearings. Iran J Sci Technol Trans B, Eng 2006; 30: 327–337.

17.

Das

Guha

Chattopadhyay

. Theoretical analysis of stability characteristics of hydrodynamic journal bearings lubricated with micropolar fluids. Proc IMechE, Part J: J Engineering Tribology 2004; 218: 45–56.

18.

Malik M, Sinhasan R and Chandra M. On performance characteristics of three lobe porous hydrodynamic journal bearings. Tribol Trans 1981; 24: 354–361.

19.

Reddy

. An introduction to the finite element method, New York: McGraw-Hill, 1984.

20.

Sinhasan

Malik

Chandra

. Analysis of two lobe porous hydrodynamic journal bearings. Wear 1980; 64: 339–353.

21.

Cameron

. The principles of lubrication, New York: Wiley, 1966.