Bearing failure is one of the reasons for centrifugal pump breakdown. Existing methods developed for bearing fault diagnosis do not work satisfactorily when the vibration signature of bearing is overlapped by the signature from other defect sources such as an impeller defect. A vibration signal processing scheme making use of ensemble empirical mode decomposition and dual Q-factor wavelet decomposition is proposed to extract information of the bearing defect in a pump. A criterion called as frequency factor is also proposed to find the best decomposition level for the given high and low Q-factor wavelet decomposition parameters. The transient impulses due to bearing defect are effectively extracted separating traces of oscillatory signature of impeller defect and the noise in the signal. The same has been demonstrated using simulation analysis and experimental study. A comparison of the proposed method with existing signal processing methods is also presented.
MuralidharanVSugumaranV. Roughset based rule learning and fuzzy classification of wavelet features for fault diagnosis of monoblock centrifugal pump. Measurement2013; 46: 3057–3063.
2.
JiangWZhengZZhuYet al.Demodulation for hydraulic pump fault signals based on local mean decomposition and improved adaptive multiscale morphology analysis. Mech Syst Signal Process2015; 58: 179–205.
3.
KooISKimWW. The development of reactor coolant pump vibration monitoring and a diagnostic system in the nuclear power plant. ISA Trans2000; 39: 309–316.
4.
TanCKMbaD. Limitation of acoustic emission for identifying seeded defects in gearboxes. J Nondestruct Eval2005; 24: 11–28.
5.
McFaddenPDSmithJD. Vibration monitoring of rolling element bearings by the high-frequency resonance technique—a review. Tribol Int1984; 17: 3–10.
6.
PrashadHGhoshMBiswasS. Diagnostic monitoring of rolling-element bearings by high-frequency resonance technique. ASLE Trans1985; 28: 439–448.
7.
Al-NajjarB. Improved effectiveness of vibration monitoring of rolling bearings in paper mills. Proc IMechE, Part J: J Engineering Tribology1998; 212: 111–120.
8.
AntoniJ. The spectral kurtosis: a useful tool for characterising non-stationary signals. Mech Syst Signal Process2006; 20: 282–307.
9.
PatelVNTandonNPandeyRK. Defect detection in deep groove ball bearing in presence of external vibration using envelope analysis and Duffing oscillator. Measurement2012; 45: 960–970.
10.
AntoniJRandallRB. The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines. Mech Syst Signal Process2006; 20: 308–331.
11.
TianJMorilloCAzarianMHet al.Motor bearing fault detection using spectral kurtosis-based feature extraction coupled with K-nearest neighbor distance analysis. IEEE Trans Ind Electron2016; 63: 1793–1803.
12.
BarszczTJabŁońskiA. A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram. Mech Syst Signal Process2011; 25: 431–451.
13.
Tian J, Morillo C and Pecht MG. Rolling element bearing fault diagnosis using simulated annealing optimized spectral kurtosis. In: 2013 IEEE conference on prognostics and health management (PHM), Gaithersburg, MD, USA, 24–27 June 2013, pp.1–5.
14.
CockerillAClarkeAPullinRet al.Determination of rolling element bearing condition via acoustic emission. Proc IMechE, Part J: J Engineering Tribology2016; 230: 1377–1388.
15.
KumarAKumarR. Enhancing weak defect features using undecimated and adaptive wavelet transform for estimation of roller defect size in a bearing. Tribol Trans2016. In Press. DOI: 10.1080/10402004.2016.1213343.
16.
OhueYYoshidaASekiM. Application of the wavelet transform to health monitoring and evaluation of dynamic characteristics in gear sets. Proc IMechE, Part J: J Engineering Tribology2004; 218: 1–11.
17.
Kumar R and Kumar A. Fusion of microphone and accelerometer sensing for the identification and measurement of inner race defect. In: 2015 10th International Conference on Measurement, Smolenice castle, Slovakia, 25–28 May 2015, pp.183–186.
18.
SinghMYadavRKKumarR. Discrete wavelet transform based measurement of inner race defect width in taper roller bearing. Mapan2013; 28: 17–23.
19.
VijayGSPaiSPSriramNSet al.Radial basis function neural network based comparison of dimensionality reduction techniques for effective bearing diagnostics. Proc IMechE, Part J: J Engineering Tribology2013; 227: 640–653. .
20.
LawL-SKimJHLiewWYHet al.An approach based on wavelet packet decomposition and Hilbert–Huang transform (WPD–HHT) for spindle bearings condition monitoring. Mech Syst Signal Process2012; 33: 197–211.
21.
PengZKTsePWChuFL. A comparison study of improved Hilbert–Huang transform and wavelet transform: Application to fault diagnosis for rolling bearing. Mech Syst Signal Process2005; 19: 974–988.
22.
WangYXuGLiangLet al.Detection of weak transient signals based on wavelet packet transform and manifold learning for rolling element bearing fault diagnosis. Mech Syst Signal Process2015; 54: 259–276.
23.
LeiYHeZZiY. Application of the EEMD method to rotor fault diagnosis of rotating machinery. Mech Syst Signal Process2009; 23: 1327–1338.
24.
ZhangXZhouJ. Multi-fault diagnosis for rolling element bearings based on ensemble empirical mode decomposition and optimized support vector machines. Mech Syst Signal Process2013; 41: 127–140.
25.
ZhangYZuoHBaiF. Classification of fault location and performance degradation of a roller bearing. Measurement2013; 46: 1178–1189.
26.
LeiYHeZZiY. EEMD method and WNN for fault diagnosis of locomotive roller bearings. Expert Syst Appl2011; 38: 7334–7341.
27.
SelesnickIW. Wavelet transform with tunable Q-factor. IEEE Trans Signal Process2011; 59: 3560–3575.
28.
He W and Zi Y. Sparsity-assisted signal representation for rotating machinery fault diagnosis using the tunable Q-factor wavelet transform with overlapping group shrinkage. In: 2014 International conference on wavelet analysis and pattern recognition, Crowne Plaza, Lanzhou, 13–16 July 2014, pp.18–23. China: IEEE.
29.
CaiGChenXHeZ. Sparsity-enabled signal decomposition using tunable Q-factor wavelet transform for fault feature extraction of gearbox. Mech Syst Signal Process2013; 41: 34–53.
30.
WangHChenJDongG. Feature extraction of rolling bearing's early weak fault based on EEMD and tunable Q-factor wavelet transform. Mech Syst Signal Process2014; 48: 103–119.
31.
HuangNEShenZLongSRet al.The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc London A Math Phys Eng Sci1998; 454: 903–995.
32.
PachoriRBNishadA. Cross-terms reduction in the Wigner–Ville distribution using tunable-Q wavelet transform. Signal Process2016; 120: 288–304.
33.
HeWZiYChenBet al.Automatic fault feature extraction of mechanical anomaly on induction motor bearing using ensemble super-wavelet transform. Mech Syst Signal Process2015; 54: 457–480.
34.
PatidarSPachoriRBGargN. Automatic diagnosis of septal defects based on tunable-Q wavelet transform of cardiac sound signals. Expert Syst Appl2015; 42: 3315–3326.
