Vertical Displacement Measurements for Bridges Using Optical Fiber Sensors and CCD Cameras

Abstract

Bridge managers all over the world are always looking for simple ways to measure bridge vertical displacements for structural health monitoring. However, traditional methods to obtain such data are either tedious or expensive. There is a need to develop a simple, inexpensive, and yet practical method to measure bridge vertical displacements. This paper proposes two methods using either optical fiber (FBG) sensors or a charge-coupled-device (CCD) camera, respectively, for vertical displacement measurements of bridges. The FBG sensor method is based on the measured horizontal strains together with the identified curvature functions obtained by a self-developed FBG Tilt sensor. CCD cameras use a large number of pixels to form an image. The CCD camera method utilizes image processing techniques for pixel identification and subsequent edge detection. A preliminary study to validate the proposed methods in laboratory was presented. The tests include applying the methods to determine the vertical displacements separately for a concrete beam and a steel beam under various loadings. The comparisons include their installations, costs, degrees of accuracy, external factors affecting the measurement, etc. It was concluded that both methods could be used for vertical displacement measurement, and they could be complementary with one another. It was suggested to further improve the two methods developed and a successful outcome will not only help to solve an important problem for bridge management, but also prepare the way for better structural health monitoring techniques.

Keywords

vertical displacement measurement CCD camera optical fiber sensors FBG sensors structural health monitoring

References

Roberts, G.W. , Dodson, A.H. and Ashkenazi , V. (1999). Twist and deflection: monitoring motion of humber bridge. GPS World, 10(10): 24-34.

Duff, K. , Hyzak, M. and Tucker, D. (1998). Real-time deformation monitoring with GPS: capabilities and limitations. smart structures and materials: sensory phenomena and measurement instrumentation for smart structures and materials. SPIE, 3330: 387-395.

Ogaja, C. , Rizos, C. , Wang, J. and Brownjohn, J. (2001). Toward the implementation of online structural monitoring using RTK-GPS and analysis of results using the wavelet transform. deformation measurements and analysis, In: 10th International Symposium on Deformation Measurements, pp. 284-293, Orange , California, USA.

Young, C. (1998). Single frequency OTF kinematics GPS bridge deflection monitoring. MSc Thesis. University of Nottingham.

Fu, G. , Moosa, A.G. and Peng, J. (1998). Probabilistic pattern recognition using coherent laser radar for bridge inspection. Final Report to FHWA, USDOT, for Contract DTFH61-97P00549. Department of Civil and Environmental Engineering, Wayne State University.

Karellas, A. , Harris, L. , Liu , H. , Davis, M. and D'Orsi , J. (1992). Charge-coupled device detector: Performance considerations and potential for small-field mammographic imaging applications. Medical Physics , 19: 1015-1023.

Chan, T.H.T. , Yu, L. , Tam , H.Y. , Ni , Y.Q. , Liu , S.Y. , Cheung, W.H. and Cheng, L.K. (2006). Fiber Bragg grating sensors for structural health monitoring of Tsing Ma Bridge: Background and experimental observation. Engineering Structures , 28: 648-59.

Guan, B.O. , Tam, H.Y. and Liu, S.Y. (2004). Temperature-independent fibre Bragg grating tilt sensor. IEEE Photonics Technology Letters, 16: 224-226.

Vurpillot, S.V. , Daniele, I. and Antonio, S. (1996). Mathematical model for the determination of the vertical displacement from internal horizontal measurements of a bridge. SPIE Smart Structure and Materials, 46-53.

Vertical Displacement Measurements for Bridges Using Optical Fiber Sensors and CCD Cameras — A Preliminary Study

Abstract

Keywords

References