The present paper details two techniques that were employed to determine laser weld material properties, and outlines how the weld properties were used in the finite element analysis simulation of simple small scale axisymmetric tests. From these simulations, an understanding of some fundamental laser welded tailored blank formability issues was gained, which would otherwise have required substantial practical tests to be conducted. The materials studied in the present paper were high strength steels, including a relatively newly developed ultrahigh strength steel, for application in structural body in white components.
References
1.
DryD.: ‘The processing and formability of laser welded tailored blanks for automotive applications’, EngD thesis, EPSRC Engineering Doctorate Centre, University of Wales Swansea, UK, January 2001.
DryD., HughesD., and OwenD. R. J.: Proc. 3rd Int. Conf. on ‘Materials for lean weight vehicles’, Heritage Motor Centre, Gaydon, UK, November 1999, IoM Communications.
4.
DryD., HughesD., and OwenD. R. J.: Ironmaking Steelmaking, 2001, 28, (2), 89–95.
5.
‘Engineering materials handbook’, 1st edn, 1–18; 1958, New York, McGraw-Hill.
6.
‘Machinery's handbook’, 22nd revised edn, 2131–2133; 1985, New York, Industrial Press Inc.
