A discrete double-controller scheme for delayed processes with both load and set-point disturbances

Abstract

Using a double-controller strategy and a design approach related to Dahlin’s controller, a new sampled data control scheme is presented that is suitable for handling both set-point change and load disturbances. This control scheme has two controllers, a set-point controller and a load controller, which result in the separation of the load response from the set-point response in a closed-loop system. These two controllers can be designed independently to achieve good system performance for both set-point tracking and load rejection. The control scheme is applicable to processes that can be approximated by first-order plus time delay dynamics. For set-point changes, the set-point controller is a generalized Dahlin controller that has an extra tuning parameter T_LC and has more ‘exibility and more robustness than Dahlin’s controller. For load disturbances, the load controller is also a generalized Dahlin controller and shows a significant improvement over the performance of Dahlin’s controller. The new double-controller scheme also alleviates a difficult compromise that the generalized Dahlin controller makes between the set-point tracking performance and load rejection performance. A simulation study is used to evaluate the performance of this new double-controller scheme in the presence of noise and model errors, and to compare it to Dahlin’s controller and the generalized Dahlin controller. The results show that the proposed double-controller scheme is superior to both Dahlin’s controller and the generalized Dahlin controller.

Keywords

Dahlin controller double controller load rejection set-point tracking time delay

References

Dahlin, E. B. 1968: Design and tuning digital controller, Part 1. Instrumentation and Control Systems 41, No. 6/7.

Lopez, A. M. , Miller, J. A. , Murrill, P. W. and Smith, C. L. 1967: Controller tuning relationships based on integral performance criteria. Instrum. Technology. 14, 57-63.

Meyer, B. , Seborg, D. E. and Wood, R. K. 1976: A comparison of the Smith predictor and conventional feedback control. Chemical Engineering Science 31, 775-782.

Meyer, C. B. and Jutan, A. 1988: A sampled data controller for processes with time delay and load disturbances. ISA Transactions 27, 43-48.

Nakano, E. and Jutan, A. 1994: Application of response surface methodology in controller fine-tuning. ISA Transactions 33, 353-366.

Nielsen, G. 1969: Control of systems with time delay. Proceedings of the 4th IFAC Congress, Warsaw.

Rovira, A. A. , Murrill, P. W. and Smith, C. L. 1969: Tuning controllers for set-point changes. Instrumentation and Control Systems. (USA) 42, 67-69.

Tian, Y. and Gao, F. 1998: Double-controller scheme for separating load rejection from set-point tracking. Transactions of the Institute of Chemical Engineers 76, Part A, 445-450.