Optimal design of engine mount rubber considering stiffness and fatigue strength

Abstract

Engine mount rubber (EMR) is an important vehicle component to isolate the vehicle structure from engine vibration. The paper deals with optimal design of EMR considering the material stiffness and fatigue strength of a rubber. The objective is to minimize both the weight and the maximum stress of EMR, and to maximize the fatigue life cycle subjected to constraints on the static stiffness of the rubber. A hyperelastic rubber model with a high strain range is used to accommodate the non-linear behaviour of EMR in the stress and fatigue analysis. In the context of approximate optimization, a back-propagation neural network is used to construct global response surfaces between input design variables and output responses of objective functions and constraints. A microgenetic algorithm (MGA) is adopted as a global optimizer in order to consider the inherent non-linearity of analysis model as well. A multi-objective optimization result shows improved design performances regarding the reduction in the maximum stress and the increase in the life cycle with acceptable material stiffness.

Keywords

engine mount rubber stiffness fatigue life approximate optimization back-propagation neural network microgenetic algorithm

Get full access to this article

View all access options for this article.

References

Schmit

R. V.

Leingang

C. J.

Design of elasto-meric vibration isolation mounting systems for internal combustion engines. SAE paper 760431, 1976.

Browne

K. A.

Taylor

E. A.

Engine mount. US Pat. 2, 175, 825, 10 October 1939.

Senecal

P. K.

Development of a methodology for internal combustion engine design using multi-dimensional modeling with validation through experiments. PhD Dissertation, University of Wisconsin, Madison, Wisconsin, 2000.

Peelamedu

S. M.

Naganathan

N. G.

Dukkipati

R. V.

Automotive vehicle engine mounting systems: A survey. Trans. ASME, J. Dynamic Systems, Measmts, Control, 2001, 123 (2), 186–194.

Breti

Optimization of engine mounting systems to minimize vehicle vibration. SAE paper 931322, 1993.

Karanth

N. V.

Raju

Kumbhar

M. S.

Vijayalakshmi

Design and evaluation of engine mounts of a passenger utility vehicle. SAE paper 962493, 1996.

La Civita

Sestieri

Optimization of an engine mounting system for vibroacoustic comfort improvement. Proc. SPIE, 1999, 3727, 1998–2004.

Lee

Hajela

Parallel genetic algorithm implementation in multidisciplinary rotor blade design. J. Aircr., 1996, 33 (5), 962–969.

Kim

Optimization of runner system in injection molding using micro genetic algorithm. MS Thesis in Mechanical Engineering, Yonsei University, Seoul, South Korea, 2003.

10.

Mars

W. V.

Fatemi

Factors that affect the fatigue life of rubber: A literature survey. Rubber Chem. Technol., 2004, 3, 76–78.

11.

Ogden

R. W.

Roxburgh

D. G.

A pseudo-elastic model for the Mullins effect in filled rubber. Proc. R. Soc. A, 1999, 455, 2861–2877.

12.

Park

H. Y.

Development of integrated design system for mechanical rubber components. Report of the Korea Institute of Machinery and Materials, 2000, pp. 3–239.

13.

MSC Marc Theory Manual, 2005 (MSC Software Corporation, Santa Ana, California).

14.

Goldberg

D. E.

Sizing populations for serial and parallel genetic algorithms. TCGA Report 88004, The Clearinghouse for Genetic Algorithms, University of Alabama, 1988.

15.

Krishnakumar

Micro genetic algorithms for stationary and non-stationary function optimization. Intell. Control Adaptive Systems, 1989, 1196, 289–296.

16.

Dennis

B. H.

Dulikravich

G. S.

Optimization of magneto-hydrodynamic control of diffuser flows using micro-genetic algorithms and least-squares finite elements. Finite Elements Analysis Design, 2001, 37 (5), 349–363.

17.

Hajela

Lee

Genetic algorithms in multi-disciplinary rotor blade design. In Proceedings of the 35th AIAA/ASME/ASCE/AHS/ASC on

Structures, structural dynamics and materials conference, New Orleans, Louisiana, USA, 1995, paper 1995–1144 (AIAA, Reston, Virginia).

18.

Hornik

Stinchcombe

White

Universal approximation of an unknown mapping and its derivatives using multilayer feedforward networks. Neural Networks, 1990, 3 (5), 551–560.

19.

Kim

Lee

Optimization of transonic airfoil using GA based on neural network and multiple regression models. Trans. Korean Soc. Mech. Engrs A, 2002, 26 (12), 2556–2564.

20.

Mason

W. J.

Coverstone

Victoria

John

Optimal earth orbiting satellite constellations via a pareto genetic algorithm. In Proceedings of the AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 1998, AIAA paper 98–4381, pp. 169–177 (American Institute of Aeronautics and Astronautics, Washington, DC).