The thermal performance of wickless thermosyphon based heat pipe heat exchangers (HPHEs) for naturally ventilated buildings was simulated using a computer simulation program. This computer program utilizing Microsoft Visual Basic 6.0 software was developed on the basis of the effectiveness—number of heat transfer units (NTU) method and uses the concept of iteration to predict the temperature distribution across the HPHE and its thermal performance. The overall effectiveness of HPHEs was also studied in this research.
WuX. P.JohnsonP.AkbarzadehA.Application of heat pipe heat exchangers to humidity control in air conditioning systems. Appl. Thermal Engng, 1997, 17(6), 561–568.
2.
HendersonH. I.RengarajanK.ShireyD. B.IIIThe impact of comfort control on air conditioner energy use in humid climates. ASHRAE Trans.: Res., 1992, (3607), 104–113.
3.
AmodeJ. O.FeldmanK. T.Preliminary analysis of heat pipe heat exchangers for heat recovery. ASME paper 75-WA/Ht-36, 1976.
4.
LeeY.BedrossianA.The characteristics of heat exchanger using heat pipes or thermosyphons. Int. J. Heat Mass Transfer, 1976, 21, 221–229.
5.
KrishmanK. N.RaoK. S.Analysis and design of a heat pipe heat exchanger. In Proceedings of Fifth International Heat Pipe Conference, Tsukuba Science City, Japan, 1984, pp. 152–156.
6.
ChaudroneS.Modelization and optimization of heat pipe heat exchangers. In Proceedings of Fifth International Heat Pipe Conference, Tsukuba Science City, Japan, 1984, pp. 53–58.
7.
YauY. H. PhD (Building Services Engineering) Progress Report, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, September 2000.
8.
WongS. W.An experimental and theoretical study on a heat pipe heat exchanger for air model. Mechanical Department Graduation Project Report, University of Malaya, Kuala Lumpur, Malaysia, session 1998-1999.
9.
AzadE.GeoolaF.A design procedure for gravity-assisted heat pipe heat exchanger. J. Heat Recovery Syst., 1984, 4, 101–111.
10.
HolmanJ. P.Heat Transfer, 1981 (McGraw-Hill, New York).
11.
KaysM. W.LondonA. L.Compact Heat Exchangers, 1964 (McGraw-Hill, New York).
AzadE.MohammadiehF.MoztarzadehF.Thermal performance of heat pipe recovery system. J. Heat Recovery Syst., 1985, 5(6), 561–570.
14.
ZhukaukasA.Banks of plain and finned tubes for single-phase fluid flow. In Heat Exchanger Design Handbook, 1984 (Hemisphere, New York).
15.
YauY. H.WongS. W.ThanC. F.Thermal performance of heat pipe heat exchangers. In Proceedings of JSPS-VCC, Kuala Lumpur, 7-8 December 1998, pp. 408–413.
16.
YauY. H.WongS. W.TongC. Y.An experimental and theoretical study on a heat pipe heat exchanger. J. Heat Mass Transfer, 1999, 21, 105–110.
17.
YauY. H.WongS. W.TongC. Y.ThanC. F.The utilization of heat exchangers for energy conservation in air conditioning. In Proceedings of World Engineering Congress and Exhibition, Kuala Lumpur, 19-22 July 1999, pp. 147–151.
18.
YauY. H.LeeS. Y.Experimental and theoretical performance analysis of heat pipe heat exchangers for building HVAC systems in tropical climate. In Sixth International Heat Pipe Symposium 2000 (6IHPS-2000), Chiang Mai, Thailand, 5-9 November 2000, pp. 183–190.
19.
MathurG. D.Using heat pipe heat exchangers for reducing high energy costs of treating ventilation air. In Proceedings of the 1996 31st Intersociety Energy Conversion Engineering Conference (IECEC 96), Part 2 (of 4), 1996, pp. 1447–1452 (IEEE, New York).
